Products
$265.08 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal.These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then i...
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal.These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used.Kit contents include:• (3) Pigtail lug covers• (3) Mastic sealing strips• (3) Locking pins (kits 5302–5304 only)• (3) Tubes of silicone grease• (1) Instruction sheet
The 3M Motor Lead Pigtail Splice Kit 5300 Series features moisture-proof mastic strips and a tough E...150
The 3M Motor Lead Pigtail Splice Kit 5300 Series features moisture-proof mastic strips and a tough EPDM rubber lug cover that easily slips onto cables. Simply crimp the lugs onto cables in a pigtail configuration to ensure a strong seal on the lugs. The kit is a great way to protect and secure bolted, copper-compression, 1-hole lugs. It has everything you need to make 3 splices, including pigtail lug covers, mastic sealing strips and silicone grease. This product is CSA Certified and RoHS 2011/65/EU Compliant?.
- Splices motor lead cables to incoming feeder cables
- Designed to use with copper compression, 1-hole lugs
- Slip-on lug cover is made of durable EPDM rubber
- For pigtail (stub) connections at 1000V or less
- Splices motor lead cables to incoming feeder cables
- Designed to use with copper compression, 1-hole lugs
- Slip-on lug cover is made of durable EPDM rubber
- For pigtail (stub) connections at 1000V or less
- UPC
- 054007122630
- UNSPSC
- 39121718
- Country of Origin
- USA
- Type:
- Pigtail
- Voltage Rating:
- 0 to 1,000 V
- Cable Size:
- 10-4
- Type:
- Pigtail
- Voltage Rating:
- 0 to 1,000 V
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less...
$265.08 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$547.19 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5300 Series Motor Lead Pigtail Splice Kit contains 3 each of pigtail lug covers, cold shrink tubes, silicone grease tubes, solvent cleaning cloths, splicing tape 130C and more. This shielded and non shielded splice kit features a slip on splice cover that is made of a durable EPDM rubber while mastic strips are used for moisture seal applications. It includes high dielectric constant stress control for reducing the size and electrical stress. This kit is perfect for splicing polyethylene/cro...
3M™ 5300 Series Motor Lead Pigtail Splice Kit contains 3 each of pigtail lug covers, cold shrink tubes, silicone grease tubes, solvent cleaning cloths, splicing tape 130C and more. This shielded and non shielded splice kit features a slip on splice cover that is made of a durable EPDM rubber while mastic strips are used for moisture seal applications. It includes high dielectric constant stress control for reducing the size and electrical stress. This kit is perfect for splicing polyethylene/cross linked cable, ethylene propylene rubber cable, copper conductors and more. RoHS 2011/65/EU Compliant?.
3M™ 5300 Series Motor Lead Pigtail Splice Kit contains 3 each of pigtail lug covers, cold shrink tub...150
3M™ 5300 Series Motor Lead Pigtail Splice Kit contains 3 each of pigtail lug covers, cold shrink tubes, silicone grease tubes, solvent cleaning cloths, splicing tape 130C and more. This shielded and non shielded splice kit features a slip on splice cover that is made of a durable EPDM rubber while mastic strips are used for moisture seal applications. It includes high dielectric constant stress control for reducing the size and electrical stress. This kit is perfect for splicing polyethylene/cross linked cable, ethylene propylene rubber cable, copper conductors and more. RoHS 2011/65/EU Compliant?.
- UPC
- 054007122746
- UNSPSC
- 39121718
- Country of Origin
- USA
- Color:
- Black
- Type:
- Motor Lead Pigtail Splice
- Voltage Rating:
- 625 V
- Color:
- Black
- Operating Temperature:
- 90°C
- Type:
- Motor Lead Pigtail Splice
- Voltage Rating:
- 625 V
3M™ 5300 Series Motor Lead Pigtail Splice Kit contains 3 each of pigtail lug covers, cold shrink tubes, silicone grease tubes, solvent cleaning cloths, splicing tape 130C and more. This shielded and n...
$547.19 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$30.16 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal.These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then i...
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal.These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used.Kit contents include:• (3) Pigtail lug covers• (3) Mastic sealing strips• (3) Locking pins (kits 5302–5304 only)• (3) Tubes of silicone grease• (1) Instruction sheet
The 3M Motor Lead Pigtail Splice Kit 5300 Series is a great way to protect and secure bolted lugs. I...150
The 3M Motor Lead Pigtail Splice Kit 5300 Series is a great way to protect and secure bolted lugs. It features moisture-proof mastic strips and a tough EPDM rubber lug cover that easily slips onto cables. Simply crimp the lugs onto cables in a pigtail configuration to ensure a strong seal on the lugs. The kit is compatible with copper compression, 1-hole lugs and includes enough pigtail lug covers, mastic sealing strips and silicone grease for 3 splices. This product is CSA Certified and RoHS 2011/65/EU Compliant?.
- Splices motor lead cables to incoming feeder cables
- Designed to use with copper compression, 1-hole lugs
- Slip-on lug cover is made of durable EPDM rubber
- For pigtail (stub) connections at 1000V or less
- Splices motor lead cables to incoming feeder cables
- Designed to use with copper compression, 1-hole lugs
- Slip-on lug cover is made of durable EPDM rubber
- For pigtail (stub) connections at 1000V or less
- UPC
- 054007083177
- UNSPSC
- 39121718
- Country of Origin
- USA
- Type:
- Pigtail
- Voltage Rating:
- 0 to 1,000 V
- Cable Size:
- 14-10
- Number Of Cables:
- 3
- Type:
- Pigtail
- Voltage Rating:
- 0 to 1,000 V
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less...
$30.16 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$390.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Motor Lead Inline Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables. 3M™ Motor Lead Splicing Kits 5331-5334 can accommodate inline connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal on the inline kits.These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables,...
3M™ Motor Lead Inline Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables. 3M™ Motor Lead Splicing Kits 5331-5334 can accommodate inline connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal on the inline kits.These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ 30000 Series copper compression lugs, or other UL listed copper lugs, can be used. In addition, 3M™ Motor Lead Splicing Kits 5331-5334 require vinyl tape which can also be purchased separately.For inline splice kits: The longitudinal space required for assembly will be approximately 2 (splice cover length), to allow space for the splice while the connection is being made.Kit contents include:• (3) Cold Shrink tubes• (12) Adapters• (3) Rolls Scotch® Stress Control Tape 2220• (3) Bags of solvent cleaning cloths• (6) Tubes of silicone grease• (3) Rolls Scotch® Linerless Rubber Splicing Tape 130C• (3) Instruction sheets
150
- Features shielded, non-shielded cables
- Designed for splicing motor lead cables to the incoming feeder cables
- Suitable for use with 30000 Series copper compression lugs or other UL Listed copper lugs
- 0.3 to 0.51-in O.D. insulation
- Features shielded, non-shielded cables
- Designed for splicing motor lead cables to the incoming feeder cables
- Suitable for use with 30000 Series copper compression lugs or other UL Listed copper lugs
- 0.3 to 0.51-in O.D. insulation
- UPC
- 054007122760
- UNSPSC
- 39121718
- Country of Origin
- USA
- Color:
- Black
- Type:
- Motor Lead Pigtail Splice
- Voltage Rating:
- 625 V
- Color:
- Black
- Operating Temperature:
- 90°C
- Type:
- Motor Lead Pigtail Splice
- Voltage Rating:
- 625 V
3M™ Motor Lead Inline Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables. 3M™ Motor Lead Splicing Kits 5331-5334 can accommodate inline connections, 5/8 kV...
$390.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$440.89 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing...
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
150
- Designed to provide protection for bulkhead termination connectors
- Offers protection from wet and salt-fog installation environments
- Ideal for use in standard and hazardous locations
- Insulator is formulated with EPDM rubber which contains no chlorides or sulfur
- Designed to provide protection for bulkhead termination connectors
- Offers protection from wet and salt-fog installation environments
- Ideal for use in standard and hazardous locations
- Insulator is formulated with EPDM rubber which contains no chlorides or sulfur
- UPC
- 054007430278
- UNSPSC
- 39121718
- Country of Origin
- USA
- Color:
- Black
- Type:
- Corrosion Protection
- Cable Size:
- 1.97 in - 4.30 in
- Color:
- Black
- Type:
- Corrosion Protection
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog ins...
$440.89 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$431.26 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
For 5 kV and 8 kV Cable, Types SHD-GC, MP and MP-GC. The 8043-1 Kit can be installed without the use of heat or additional tools, and the cable returned to service immediately. 3M™ Cold Shrink Tubes, with the removable core, are designed for quick installation. Connectors are ordered separately. If regular power connectors are used, length cannot exceed • 1/• inches.
For 5 kV and 8 kV Cable, Types SHD-GC, MP and MP-GC. The 8043-1 Kit can be installed without the use of heat or additional tools, and the cable returned to service immediately. 3M™ Cold Shrink Tubes, with the removable core, are designed for quick installation. Connectors are ordered separately. If regular power connectors are used, length cannot exceed • 1/• inches.
150
- Perfect for splicing non-shielded cables
- Rated for 5 to 8 kV applications
- Includes Scotch® 24 electrical shielding tape, cold shrink filler tube, jacket tube, Scotch 13 electrical semi-conducting tape and more
- ABS Certified and RoHS 2011/65/EU Compliant
- Perfect for splicing non-shielded cables
- Rated for 5 to 8 kV applications
- Includes Scotch® 24 electrical shielding tape, cold shrink filler tube, jacket tube, Scotch 13 electrical semi-conducting tape and more
- ABS Certified and RoHS 2011/65/EU Compliant
- UPC
- 054007156680
- UNSPSC
- 39121718
- Country of Origin
- USA
- Color:
- Black
- Type:
- Cold Shrink Splice
- Voltage Rating:
- 5,000/8,000 V
- Cable Size:
- 1 AWG; 1/0 AWG; 2 AWG; 2/0 AWG; 3/0 AWG; 4 AWG; 4/0 AWG
- Color:
- Black
- Type:
- Cold Shrink Splice
- Voltage Rating:
- 5,000/8,000 V
For 5 kV and 8 kV Cable, Types SHD-GC, MP and MP-GC. The 8043-1 Kit can be installed without the use of heat or additional tools, and the cable returned to service immediately. 3M™ Cold Shrink Tubes,...
$431.26 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$47.49 / EA
manufacturer discounts
learn about discounts
- $44.33 for $300.00+
- $42.22 for $500.00+
- $40.46 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, UF Splice Kit, Thermo-Shrink™, UF Splice Kits, Cable Size: 14 - 8 AWG, Voltage Rating: 600 V, Operating Temperature: 105 DEG C, Connector Size: 11.5 IN
IDEAL, UF Splice Kit, Thermo-Shrink™, UF Splice Kits, Cable Size: 14 - 8 AWG, Voltage Rating: 600 V, Operating Temperature: 105 DEG C, Connector Size: 11.5 IN
Direct burial rated14/3 with and without ground thru 8/3 without ground, UF?cable rangeStretcher kit...150
Direct burial rated14/3 with and without ground thru 8/3 without ground, UF?cable rangeStretcher kit repairs a 7 in. to 10 in. section damaged or destroyed by a trencher600V Maximum, 105°C ratingMeets the requirements of the 2002 NEC?Code 110-14(b) and UL486DUV resistant
- Direct burial rated
- 14/3 with and without ground thru 8/3 without ground, UF cable range
- Stretcher kit repairs a 7 in. to 10 in. section damaged or destroyed by a trencher
- 600V Maximum, 105°C rating
- Meets the requirements of the 2002 NEC Code 110-14(b) and UL486D
- UV resistant
- Direct burial rated
- 14/3 with and without ground thru 8/3 without ground, UF cable range
- Stretcher kit repairs a 7 in. to 10 in. section damaged or destroyed by a trencher
- 600V Maximum, 105°C rating
- Meets the requirements of the 2002 NEC Code 110-14(b) and UL486D
- UV resistant
- UPC
- 783250611423
- UNSPSC
- 39121718
- Country of Origin
- USA
- Type:
- UF Splice Kits
- Voltage Rating:
- 600 V
- Cable Size:
- 14 - 8 AWG
- Operating Temperature:
- 105 DEG C
- Standard:
- RoHS
- Sub Brand:
- Thermo-Shrink®
- Type:
- UF Splice Kits
- Voltage Rating:
- 600 V
IDEAL, UF Splice Kit, Thermo-Shrink™, UF Splice Kits, Cable Size: 14 - 8 AWG, Voltage Rating: 600 V, Operating Temperature: 105 DEG C, Connector Size: 11.5 IN
manufacturer discounts
learn about discounts
- $44.33 for $300.00+
- $42.22 for $500.00+
- $40.46 for $1,000.00+
$47.49 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$1,263.97 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5750 Series Cold Shrink Resin Splice Kit with flame retardant compound 2131 is designed for non shielded, armored or non armored solid dielectric cables. This kit is suitable for use with cable trays, junction boxes, weather exposed, aerial and wet or dry locations. This kit is used with 10000 and 20000 Series aluminum or copper inline compression connectors.
3M™ 5750 Series Cold Shrink Resin Splice Kit with flame retardant compound 2131 is designed for non shielded, armored or non armored solid dielectric cables. This kit is suitable for use with cable trays, junction boxes, weather exposed, aerial and wet or dry locations. This kit is used with 10000 and 20000 Series aluminum or copper inline compression connectors.
3M™ 5750 Series Cold Shrink Resin Splice Kit includes cable repair spacer webs, cold shrink insulato...150
3M™ 5750 Series Cold Shrink Resin Splice Kit includes cable repair spacer webs, cold shrink insulator assemblies, electrical semi conducting tape 13, Scotch® linerless rubber splicing tape 130C and more. The kit uses a flame retardant compound 2131 for replacing cable armor and/or jackets and insulators for electrical insulation. It is rated for 1 to 5 kV rated applications. The semi flexible resin jacket offers resistance to abrasion and moisture. This kit is perfect for inline splicing and is used with solid dielectric cables. RoHS 2011/65/EU Compliant? and MSHA Approved.
- Flame-retardant resin 2131 is used as an insulating material for cable splices
- Perfect for use with non-shielded, solid dielectric cables and indoor/outdoor applications
- 1 kV-rated for multiple and 5 kV-rated for single-cable applications
- MSHA Approved and RoHS 2011/65/EU Compliant?
- Flame-retardant resin 2131 is used as an insulating material for cable splices
- Perfect for use with non-shielded, solid dielectric cables and indoor/outdoor applications
- 1 kV-rated for multiple and 5 kV-rated for single-cable applications
- MSHA Approved and RoHS 2011/65/EU Compliant?
- UPC
- 051128591680
- UNSPSC
- 39121718
- Country of Origin
- USA
3M™ 5750 Series Cold Shrink Resin Splice Kit with flame retardant compound 2131 is designed for non shielded, armored or non armored solid dielectric cables. This kit is suitable for use with cable tr...
$1,263.97 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders