Products
$55.25 / EA
manufacturer discounts
learn about discounts
- $49.54 for $1,300.00+
- $46.87 for $2,000.00+
- $44.97 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
631 Pipe Saddle for 1 1/2" Insulation, 4"�5" Pipe
631 Pipe Saddle for 1 1/2" Insulation, 4"�5" Pipe
150
- Designed for high temperature service or where heat losses are to be kept at a minimum and to protect insulation against damage at the point of support
- Conforms with Federal Specification WW-H-171 (Type 40A or 40B), Manufacturers Standardization Society ANSI�/MSS-SP-58 (Type 39)
- Designed for high temperature service or where heat losses are to be kept at a minimum and to protect insulation against damage at the point of support
- Conforms with Federal Specification WW-H-171 (Type 40A or 40B), Manufacturers Standardization Society ANSI�/MSS-SP-58 (Type 39)
- UPC
- 782856370956
- UNSPSC
- 40141725
- Country of Origin
- US
- Material:
- Steel
- Type:
- Pipe Saddles
- Finish:
- Plain
- Length (imperial) <Nom>:
- 12 in
- Material:
- Steel
- Sub Brand:
- CADDY
- Type:
- Pipe Saddles
631 Pipe Saddle for 1 1/2" Insulation, 4"�5" Pipe
manufacturer discounts
learn about discounts
- $49.54 for $1,300.00+
- $46.87 for $2,000.00+
- $44.97 for $3,000.00+
$55.25 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$9.49 / EA
manufacturer discounts
learn about discounts
- $8.51 for $1,300.00+
- $8.05 for $2,000.00+
- $7.73 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
511 nVent CADDY EZ Riser for Copper Tube, 1" Pipe, 1 1/8" OD
511 nVent CADDY EZ Riser for Copper Tube, 1" Pipe, 1 1/8" OD
150
- Recommended for suspending vertical type K or L copper tubing risers
- Conforms with Federal Specification WW-H-171 (Type 8), Manufacturers Standardization Society (MSS) SP-58 (Type 8)
- Slotted holes make assembly easy, eliminating loose hardware
- Bolts are accessible from the front, serrated washer head design means no wrench required on back side for tightening
- Recommended for suspending vertical type K or L copper tubing risers
- Conforms with Federal Specification WW-H-171 (Type 8), Manufacturers Standardization Society (MSS) SP-58 (Type 8)
- Slotted holes make assembly easy, eliminating loose hardware
- Bolts are accessible from the front, serrated washer head design means no wrench required on back side for tightening
- UPC
- 782856369653
- UNSPSC
- 40141725
- Country of Origin
- CN
- Material:
- Steel
- Type:
- Riser Clamps
- Finish:
- Copper Electroplated
- Hole Size (Imperial) <Nom>:
- 7/16 in
- Length (imperial) <Nom>:
- 1 1/4 in
- Material:
- Steel
- Outer Diameter (Imperial) <Nom>:
- 1 1/8 in
- Pipe Size <Nom>:
- 1 in
- Standard:
- None
- Static Load (lb):
- 120 lb
- Sub Brand:
- CADDY
- Type:
- Riser Clamps
511 nVent CADDY EZ Riser for Copper Tube, 1" Pipe, 1 1/8" OD
manufacturer discounts
learn about discounts
- $8.51 for $1,300.00+
- $8.05 for $2,000.00+
- $7.73 for $3,000.00+
$9.49 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$2.80 / EA
manufacturer discounts
learn about discounts
- $2.51 for $1,300.00+
- $2.37 for $2,000.00+
- $2.28 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
455 Malleable Split Ring Hanger, Plain, 1/2" Pipe, 0.84" OD, 3/8" Rod
455 Malleable Split Ring Hanger, Plain, 1/2" Pipe, 0.84" OD, 3/8" Rod
150
- Recommended for the suspension of stationary non-insulated pipe lines
- Allows for piping runs close to ceiling or walls
- Conforms with Federal Specification WW-H-171 (Type 25), Manufacturers Standardization Society (MSS) SP-58 (Type 12)
- Recommended for the suspension of stationary non-insulated pipe lines
- Allows for piping runs close to ceiling or walls
- Conforms with Federal Specification WW-H-171 (Type 25), Manufacturers Standardization Society (MSS) SP-58 (Type 12)
- UPC
- 782856368663
- UNSPSC
- 40141725
- Country of Origin
- CN
- Material:
- Cast Iron
- Type:
- Malleable Split Ring Hangers
- Finish:
- Plain
- Material:
- Cast Iron
- Outer Diameter (Imperial) <Nom>:
- 0.840 in
- Pipe Size <Nom>:
- 1/2 in
- Rod Size (Imperial):
- 3/8 in
- Standard:
- None
- Static Load (lb):
- 180 lb
- Sub Brand:
- CADDY
- Type:
- Malleable Split Ring Hangers
455 Malleable Split Ring Hanger, Plain, 1/2" Pipe, 0.84" OD, 3/8" Rod
manufacturer discounts
learn about discounts
- $2.51 for $1,300.00+
- $2.37 for $2,000.00+
- $2.28 for $3,000.00+
$2.80 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders