Filtering by Category Manufacturers
GREENLEE TEXTRON

33489

SHROUD-SMALL
Manufacturer: GREENLEE TEXTRON
GRN 33489 SHROUD-SMALL

$337.05 each




GREENLEE TEXTRON

33531

BUSHING, PISTON-HI- PRESS
Manufacturer: GREENLEE TEXTRON
GRN 33531G BUSHING, PISTON-HI- PRES

$169.69 each




GREENLEE TEXTRON

33532

PISTON-HI PRESSURE
Manufacturer: GREENLEE TEXTRON
GRN 33532 PISTON-HI PRESSURE

$81.10 each




GREENLEE TEXTRON

34297

KIT,HYD REPAIR (7804SB,&6SB/7904,&6
Manufacturer: GREENLEE TEXTRON
GRN 34297 KIT,HYD REPAIR (7804SB,&6

$94.54 each




GREENLEE TEXTRON

35476

KIT-RELAY REPLACEMENT (940/960PS)
Manufacturer: GREENLEE TEXTRON
GRN 35476 KIT-RELAY REPLACEMENT (94

$243.61 each




GREENLEE TEXTRON

36914

CYLINDER,ANGLE DRIVER (7904-M2)
Manufacturer: GREENLEE TEXTRON
GRN 36914 CYLINDER,ANGLE DRIVER (79

$515.30 each




GREENLEE TEXTRON

12854-GRNL

BLOCK-CYLINDER PIVOT (800)
Manufacturer: GREENLEE TEXTRON
GRN 12854 BLOCK-CYLINDER PIVOT (800

$126.05 each




4253-1

DRILL 1/2 MAG MOTOR 6.2A
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 4253-1 DRILL 1/2 MAG MOTOR 6.2

$332.57 each




Full Description:
Lightweight with ample power, the ½” Electromagnetic Drill Press Motor is ideal for drilling small holes into steel. At just 8 pounds, this lightweight 6.2-amp motor still provides plenty of power to deliver 600 RPM and produce up to 1650 pounds of drill point pressure with a 1-inch steel plate. This unit features a ½” chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the 4202 fixed position base (sold separately) for best results. Bullets: Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 600 RPM ½” Capacity: Taps up to 5/8-inch, 18-threaded holes. (5/8-11 and ½-13 taps are not recommended.) Maximum force: Develops up to 1650 pounds of drill point pressure with a 1-inch steel plate 13104
Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
General purpose motor AC
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Drill Motor
Special Features
No Load Speed: 600RPM, Current Rating: 6.2AMP, Drill Point Pressure: 1610/1650LB, Drill Capacity: 1/2IN, Light Weight and Ample Power Make this a good Choice for Smaller Holes into Steel, 1/2IN Keyed Chuck, Taps upto 5/8IN-18 Threaded Hole
Application
For Electromagnetic Drill Press
Voltage Rating
120
GTIN-14: 
00045242013104
UPC: 
045242013104
UNSPSC: 
26101112
Height: 
15.6200 IN
Width: 
5.5000 IN
Length: 
5.5600 IN
Gross Weight: 
9.700 L
Country of Origin: 
CHN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

4262-1

DRILL 3/4 MAG MOTOR 11.5A
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 4262-1 DRILL 3/4 MAG MOTOR 11.

$558.31 each




Full Description:
No job is too large for this heavy-duty drill press motor. Built for production drilling, this 11.5-amp drill motor can handle the toughest drilling jobs with up to a ¾” threaded hole capacity. The unit runs at 350 no-load RPM, geared low for maximum torque. It can produce up to 1670 pounds of drill point pressure with a 1-inch steel plate. A ¾” chuck permits fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the larger 4203 adjustable base (sold separately) for the toughest applications. Bullets: Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 350 RPM Dual-Mount Gear Case/Reverse Mount: Permits tight quarter drilling 3/4” Capacity: Taps up to 1-inch, 14-threaded holes Maximum force: Develops up to 1670 pounds of drill point pressure with a 1-inch steel plate 13159
Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
General purpose motor AC
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Drill Motor
Special Features
Drill Capacity: 3/4IN, Current: 11.5AMP, Load Speed: 350RPM, Tap Capacity: 1IN-14, Drill Point Pressure: 1630/1670LB, Dual Mount Gear Case/Reverse Mount for Tight Quarter Drilling
Application
For Electromagnetic Drill Press
Voltage Rating
120
GTIN-14: 
00045242013159
UPC: 
045242013159
UNSPSC: 
26101112
Height: 
20.1300 IN
Width: 
6.4400 IN
Length: 
4.4400 IN
Gross Weight: 
21.850 L
Country of Origin: 
USA
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

4292-1

NO 3 MT DRILL 1-1/4 ELECTROMAG MOT 11.5A
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 4292-1 NO 3 MT DRILL 1-1/4 ELE

$707.99 each




Full Description:
No job is too large for this heavy-duty drill press motor. Built for production drilling, this 11.5-amp drill motor can handle the toughest drilling jobs with up to a 1-¼” threaded hole capacity. The two-speed unit runs at 375 and 750 RPM, geared low for maximum torque. It can produce up to 1600 pounds of drill point pressure with a 1-inch steel plate. This unit features a No. 3 Morse Taper Chuck, for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the larger 4203 adjustable base (sold separately) for the toughest applications. Bullets: Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 2375/750 RPM Dual-Mount Gear Case/Reverse Mount: Permits tight quarter drilling 1-1/4” Capacity: Taps up to 1-inch, 14-threaded holes Maximum force: Develops up to 1600 pounds of drill point pressure with a 1-inch steel plate 13203
Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
General purpose motor AC
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Drill Motor
Special Features
Drill Capacity: 1 1/4IN, Current: 11.5AMP, No Load Speed: 750/375RPM, Tap Capacity: 1IN-14, Drill Point Pressure: 1530/1600LB, Develops up to 1600 Pounds of Drill Point Pressure with 1IN Steel Plate
Application
For Electromagnetic Drill Press
Voltage Rating
120
GTIN-14: 
00045242013203
UPC: 
045242013203
UNSPSC: 
26101112
Height: 
20.1900 IN
Width: 
6.5000 IN
Length: 
7.2500 IN
Gross Weight: 
25.000 L
Country of Origin: 
USA
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

4297-1

DRILL 1-1/4 MAG MOT 11.5A
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 4297-1 DRILL 1-1/4 MAG MOT 11.

$707.99 each




Full Description:
No job is too large for this heavy-duty drill press motor. Built for production drilling, this 11.5-amp drill motor can handle the toughest drilling jobs with up to a 1-¼” threaded hole capacity. The two-speed unit runs at 250 and 500 RPM, geared low for maximum torque. It can produce up to 1600 pounds of drill point pressure with a 1-inch steel plate. This unit features a No. 3 Morse Taper Chuck, for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the larger 4203 adjustable base (sold separately) for the toughest applications. Bullets: Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 250/500 RPM Dual-Mount Gear Case/Reverse Mount: Permits tight quarter drilling 1-1/4” Capacity: Taps up to 1-inch, 14-threaded holes Maximum force: Develops up to 1600 pounds of drill point pressure with a 1-inch steel plate 13258
Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
General purpose motor AC
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Drill Motor
Special Features
Drill Capacity: 1 1/4IN, Current: 11.5AMP, No Load Speed: 500/250RPM, Tap Capacity: 1IN-14, Drill Point Pressure: 1530/1600LB, Develops up to 1600 Pounds of Drill Point Pressure with 1IN Steel Plate
Application
For Electromagnetic Drill Press
Voltage Rating
120
GTIN-14: 
00045242013258
UPC: 
045242013258
UNSPSC: 
26101112
Height: 
19.0000 IN
Width: 
7.0000 IN
Length: 
7.1300 IN
Gross Weight: 
25.000 L
Country of Origin: 
USA
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov
GREENLEE TEXTRON

85466

MOTOR-ELEC 1-1/2HP 100/200V 3450RPM
Manufacturer: GREENLEE TEXTRON
GRN 85466 MOTOR-ELEC 1-1/2HP 100/20

$1,047.80 each




GREENLEE TEXTRON

86314

MOTOR,ELEC 1-1/2HP 115/230V 1-P
Manufacturer: GREENLEE TEXTRON
GRN 86314 MOTOR,ELEC 1-1/2HP 115/23

$1,021.50 each




GREENLEE TEXTRON

86339

MOTOR,ELEC 1/2HP 115/230V 1-P 3450R
Manufacturer: GREENLEE TEXTRON
GRN 86339 MOTOR,ELEC 1/2HP 115/230V

$931.96 each




GREENLEE TEXTRON

86420

BRUSH (555-MOTOR)
Manufacturer: GREENLEE TEXTRON
GRN 86420 BRUSH (555-MOTOR)

$89.23 each