$39.84 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
In stock (0)
Lead time: over 7 days
may be longer on small orders
#18 - #1 Butt/Branch or #18 - 4/0 In-Line ShakeNSeal Encapsulation Epoxy Resin Splice Kits - These are Fast Easy and Inexpensive Direct Burial and Submersible Electrical Splice Kits.#18 - #1 Butt/Branch or #18 - 4/0 In-Line ShakeNSeal Encapsulation Epoxy Resin Splice Kits features include: Exothermic Epoxy Resin Encapsulation Technology UL Listed for Direct Burial Submersible Splicing Applications Durable Impregnable Epoxy Splice kits are Perfect for Above and Below Ground Splicing and Jacket...
#18 - #1 Butt/Branch or #18 - 4/0 In-Line ShakeNSeal Encapsulation Epoxy Resin Splice Kits - These are Fast Easy and Inexpensive Direct Burial and Submersible Electrical Splice Kits.#18 - #1 Butt/Branch or #18 - 4/0 In-Line ShakeNSeal Encapsulation Epoxy Resin Splice Kits features include: Exothermic Epoxy Resin Encapsulation Technology UL Listed for Direct Burial Submersible Splicing Applications Durable Impregnable Epoxy Splice kits are Perfect for Above and Below Ground Splicing and Jacket Repair Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, amp; Cable Failure Fast Error Proof Setup - Low Viscosity Resin Compound Penetrates Completely Around Splice Fungus Resistant Stub/Butt/Branch In-Line and Feedthrough Applications Rated for use with 194deg;F(90deg;C) Cable No Tool or Heat Source Required UL 486D CSA 198.2 Listed 600 Volt maximum 67024 Butt/Branch Applications Wire Range is #18 - #1 In-Line Aplication Wire Range is #18 - 4/0 cULus Listed Order Qty of 1 = 1 Piece Below is more info on our #18 - #1 Butt/Branch or #18 - 4/0 In-Line ShakeNSeal Encapsulation Epoxy Resin Splice Kits
150
- ShakeNSeal Encapsulation Epoxy Resin Splice Kits - These are Fast Easy and Inexpensive Direct Burial and Submersible Electrical Splice Kits
- Exothermic Epoxy Resin Encapsulation Technology
- UL Listed for Direct Burial & Submersible Splicing Applications
- Durable Impregnable Epoxy Splice kits are Perfect for Above and Below Ground Splicing and Jacket Repair
- Fast Error Proof Setup - Low Viscosity Resin Compound Penetrates Completely Around Splice
- Fungus Resistant
- ShakeNSeal Encapsulation Epoxy Resin Splice Kits - These are Fast Easy and Inexpensive Direct Burial and Submersible Electrical Splice Kits
- Exothermic Epoxy Resin Encapsulation Technology
- UL Listed for Direct Burial & Submersible Splicing Applications
- Durable Impregnable Epoxy Splice kits are Perfect for Above and Below Ground Splicing and Jacket Repair
- Fast Error Proof Setup - Low Viscosity Resin Compound Penetrates Completely Around Splice
- Fungus Resistant
- UPC
- 601986670241
- UNSPSC
- 39121718
- Country of Origin
- US
- Conductor Range:
- #18-4/0
- MAXIMUM VOLTAGE:
- 600 Volts
- Slice Method:
- Resin Splice Kit
- Splice Type:
- Direct Burial
CPT-3-1/2-3M
$585.21 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 2.90 in Yes |
Connector Maximum Installed Length | 13.50 in Yes |
Connector Maximum Outside Diameter | 6.00 in Yes |
5513A-3/0-CU
$651.20 /ea
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
Attributed Data | Included |
---|
CPT-3/4-3M
$326.36 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 0.66 in Yes |
Connector Maximum Installed Length | 4.80 in Yes |
Connector Maximum Outside Diameter | 1.90 in Yes |
Product Image | |||
---|---|---|---|
CPT-3-1/2-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$585.21 / EA
|
5513A-3/0-CU
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design...
$651.20 / EA
|
CPT-3/4-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$326.36 / EA
|
|
Attributed Data | |||
Cable Minimum Outside Diameter | 0.66 in 0.66 in | 2.90 in 2.90 in | |
Connector Maximum Installed Length | 4.80 in 4.80 in | 13.50 in 13.50 in | |
Connector Maximum Outside Diameter | 1.90 in 1.90 in | 6.00 in 6.00 in | |
Add a product to the cart | Show more details | Show more details | Show more details |