$13.95 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
In stock (0)
Lead time: over 7 days
may be longer on small orders
Direct Burial Splice Covers #14 - 2/0Direct Burial Splice Covers #14 - 2/0 features include: li>Our Direct Burial Splice Covers Can Be Used with a variety Connectors for Direct Burial, Underground Vault and Overhead Service Splices Rubber Cover Only - Connector Not Included No Taping, Heat Shrink or Mastic Required Approved for Aluminum or Copper Conductors or Connectors 600 Volt max REA Approved Order Qty of 1 = 1 Piece Below is more info on our Direct Burial Splice Covers #14 - 2/0
Direct Burial Splice Covers #14 - 2/0Direct Burial Splice Covers #14 - 2/0 features include: li>Our Direct Burial Splice Covers Can Be Used with a variety Connectors for Direct Burial, Underground Vault and Overhead Service Splices Rubber Cover Only - Connector Not Included No Taping, Heat Shrink or Mastic Required Approved for Aluminum or Copper Conductors or Connectors 600 Volt max REA Approved Order Qty of 1 = 1 Piece Below is more info on our Direct Burial Splice Covers #14 - 2/0
150
- Direct Burial Splice Covers
- Our Direct Burial Splice Covers Can Be Used with a variety Connectors for Direct Burial, Underground Vault and Overhead Service Splices
- Rubber Cover Only - Connector Not Included
- No Taping, Heat Shrink or Mastic Required
- Approved for Aluminum or Copper Conductors or Connectors
- REA Approved
- Direct Burial Splice Covers
- Our Direct Burial Splice Covers Can Be Used with a variety Connectors for Direct Burial, Underground Vault and Overhead Service Splices
- Rubber Cover Only - Connector Not Included
- No Taping, Heat Shrink or Mastic Required
- Approved for Aluminum or Copper Conductors or Connectors
- REA Approved
- UPC
- 601986670524
- UNSPSC
- 39121718
- Country of Origin
- US
- Conductor Range:
- #14-2/0
- MAXIMUM VOLTAGE:
- 600 Volts
- Product Length:
- 5.97"
- Splice Type:
- Direct Burial Rubber Splice Cover
CPT-3-1/2-3M
$585.21 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 2.90 in Yes |
Connector Maximum Installed Length | 13.50 in Yes |
Connector Maximum Outside Diameter | 6.00 in Yes |
5513A-3/0-CU
$651.20 /ea
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
Attributed Data | Included |
---|
CPT-3/4-3M
$326.36 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 0.66 in Yes |
Connector Maximum Installed Length | 4.80 in Yes |
Connector Maximum Outside Diameter | 1.90 in Yes |
Product Image | |||
---|---|---|---|
CPT-3-1/2-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$585.21 / EA
|
5513A-3/0-CU
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design...
$651.20 / EA
|
CPT-3/4-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$326.36 / EA
|
|
Attributed Data | |||
Cable Minimum Outside Diameter | 0.66 in 0.66 in | 2.90 in 2.90 in | |
Connector Maximum Installed Length | 4.80 in 4.80 in | 13.50 in 13.50 in | |
Connector Maximum Outside Diameter | 1.90 in 1.90 in | 6.00 in 6.00 in | |
Add a product to the cart | Show more details | Show more details | Show more details |