$270.39 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall perimeter joints and through penetration seals to control the transmission of fire, heat, smoke and noxious gas. This water-based firestop sealer is applied with conventional airless sprayers, dries quickly and cleans up easily.
Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall perimeter joints and through penetration seals to control the transmission of fire, heat, smoke and noxious gas. This water-based firestop sealer is applied with conventional airless sprayers, dries quickly and cleans up easily.
Effective Fire Protection in a Flexible, Durable CoatingFormulated for flexibility that stays where...150
Effective Fire Protection in a Flexible, Durable CoatingFormulated for flexibility that stays where it’s sprayed, 3M™ FireDam™ Spray 200 controls the transmission of fire, heat, smoke and noxious gasses before, during and after exposure to fire. It provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079) and up to 2-hour protection for through penetration systems per ASTM E 814 (UL 1479) & CAN/ULC-S115. It also provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307. This firestop coating is Ideal for sealing building joints, penetration seals and perimeter joints between fire-rated floors and fire-rated walls. It also minimizes noise transfer (STC Rating of 56 when tested in a STC 56-rated wall assembly).This elastomeric coating forms a durable, flexible seal with up to +/- 50% compression/extension of nominal joint width without cracking. It resists sag for vertical applications, and displays excellent hiding power which makes it easier for technicians to maintain the proper coating thickness.Recommended Applications Floor to floor joints Perimeter joints (curtain walls) Head-of-wall jointsEasy Spray-On Fire ProtectionThe water-based, easy-cleanup 3M™ FireDam™ Spray 200 is applied using conventional airless sprayers. Applied as a 1/8” (3mm) coating, it dries quickly to a uniform seal in a variety of conditions. It is also freeze and thaw resistant, helping to ensure consistent firestop in a range of conditions during construction. 3M™ FireDam™ Spray 200 is available in a distinct red for easy identification, or a dark gray to match existing surroundings.Reliable and Affordable Fire ProtectionEffective and easy to install, 3M™ FireDam™ Spray 200 is part of 3M's family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products.
- Provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079)
- Provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307
- Highly elastic sealer is compression/extension tested up to ± 50% of nominal joint width without cracking
- Resists freezing and thaws for a consistent seal in a range of conditions
- Provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079)
- Provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307
- Highly elastic sealer is compression/extension tested up to ± 50% of nominal joint width without cracking
- Resists freezing and thaws for a consistent seal in a range of conditions
- UPC
- 051115187971
- UNSPSC
- 46191604
- Country of Origin
- USA
CS-195+28x52
$436.01 /ea
3M™ Fire Barrier Composite Sheet CS-195+ is a lightweight intumescent firestop that combines four components into a single system to help slow the spread of fire, smoke and noxious gases. Sheets combine 28-gauge steel, intumescent material, wire mesh and aluminum foil and are easy to handle and install with common trade tools. They are firestop tested for up to 4 hours of fire protection.
FIP
$474.36 /ea
Designed to expand up to 5 times in volume after dispensing, 3M™ Fire Barrier Rated Foam FIP 1-Step is a two-part urethane, smoke, sound and firestopping foam. This intumescent foam can be used to fill the annular space created by pipes and cables penetrating through fire-rated construction. It’s an alternative to mineral wool, bricks, pillows and runny, ineffective foams and is UL listed.
2RDPTF-3M
$3.22 /ea
Our 3M™ Fire Barrier Pass-Through Device Foam Plugs are designed for closing 3M™ Fire Barrier Pass-Through Devices which are used in wall and floor through-penetrations. They are simple to use and help reduce sound and smoke transmission. During a fire, this product, used in conjunction with a 3M™ Fire Barrier Pass-Through Device, helps maintain a tight seal against smoke.
| Product Image |
|
|
|
|---|---|---|---|
|
CS-195+28x52
3M™ Fire Barrier Composite Sheet CS-195+ is a lightweight intumescent firestop that combines four components into a single system to help slow the spread of fire, smoke and noxious gases. Sheets combine 28-gauge steel, intumescent material, wire mesh...
$436.01 / EA
|
FIP
Designed to expand up to 5 times in volume after dispensing, 3M™ Fire Barrier Rated Foam FIP 1-Step is a two-part urethane, smoke, sound and firestopping foam. This intumescent foam can be used to fill the annular space created by pipes and cables pe...
$474.36 / EA
|
2RDPTF-3M
Our 3M™ Fire Barrier Pass-Through Device Foam Plugs are designed for closing 3M™ Fire Barrier Pass-Through Devices which are used in wall and floor through-penetrations. They are simple to use and help reduce sound and smoke transmission. During a fi...
$3.22 / EA
|
|
| Attributed Data | |||
| Add a product to the cart | Show more details | Show more details | Show more details |
Recently Viewed
-
CES18G
TPI CORPORATION
Wall Shutter, Width- 21.13 IN, Length- 21.13 IN, Wall Mounting. For Use With 18 IN Guard Mounted Direct Drive Exhaust Fans and Venturi Mounted Direct...
See more details -
-
CES16G
TPI CORPORATION
Wall Shutter, Width- 19 IN, Length- 19 IN, Wall Mounting. For Use With 16IN Guard Mounted Direct Drive Exhaust Fans and Venturi Mounted Direct Drive E...
See more details -
NVSLCFG25RXG
KILLARK ELECTRICAL PRODUCTS
NV2 SERIES - GRAY NON-METALLIC CORROSION RESISTANT COMPACT FLASHING LEDLIGHT FIXTURE (LED INCLUDED) - 3/4 INCH CEILING MOUNT WITH RED STROBELIGHT AND...
See more details -
200-3M
3M
Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall per...
See more details