3M™ Wire Pulling Lubricant WL is a translucent polymer gel that acts as an excellent lubricant for pulling both electrical and communication cable. This lubricant gel wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction which lessens the chance of cable jacket damage from high pulling forces.

3M™ Wire Pulling Lubricant WL is a translucent polymer gel that acts as an excellent lubricant for pulling both electrical and communication cable. This lubricant gel wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction which lessens the chance of cable jacket damage from high pulling forces. read less

3M™ Wire Pulling Lubricant WL is a consistent gel that does not liquefy, or separate with hot or col...150 read more

3M™ Wire Pulling Lubricant WL is a consistent gel that does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperature range of 20 to 110 degrees F (-6.7 to 43 degrees C). read less

3M™ Clear Wire Pulling Lubricant WLC is a clear water-based gel that acts as an excellent lubricant for pulling electrical and communication cable. This easy to apply gel dries off slowly on cables. The lubricant produces low coefficient of friction to reduce the chance of cable damage from high pulling forces.

3M™ Clear Wire Pulling Lubricant WLC is a clear water-based gel that acts as an excellent lubricant for pulling electrical and communication cable. This easy to apply gel dries off slowly on cables. The lubricant produces low coefficient of friction to reduce the chance of cable damage from high pulling forces. read less

3M™ Clear Wire Pulling Lubricant WLC is a consistent gel that does not liquefy, or separate with hot...150 read more

3M™ Clear Wire Pulling Lubricant WLC is a consistent gel that does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperature range of 20 to 120 degrees F (-6.7 to 49 degrees C). C UL Listed and RoHS 2011/65/EU Compliant. read less

3M™ Clear Wire Pulling Lubricant WLC is a clear water-based gel that acts as an excellent lubricant for pulling electrical and communication cable. This easy to apply gel dries off slowly on cables. The lubricant produces low coefficient of friction to reduce the chance of cable damage from high pulling forces.

3M™ Clear Wire Pulling Lubricant WLC is a clear water-based gel that acts as an excellent lubricant for pulling electrical and communication cable. This easy to apply gel dries off slowly on cables. The lubricant produces low coefficient of friction to reduce the chance of cable damage from high pulling forces. read less

3M™ Clear Wire Pulling Lubricant WLC is a consistent gel that does not liquefy, or separate with hot...150 read more

3M™ Clear Wire Pulling Lubricant WLC is a consistent gel that does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperature range of 20 to 120 degrees F (-6.7 to 49 degrees C). C UL Listed and RoHS 2011/65/EU Compliant. read less

3M™ Wire Pulling Lubricant Wintergrade WLW is a translucent, green polymer gel that acts as an excellent lubricant for pulling wire and cable. This lubricant wipes off the cable quickly and cleanly before terminating or splicing. It is a modified version of our WL gel lubricant for cold weather applications.

3M™ Wire Pulling Lubricant Wintergrade WLW is a translucent, green polymer gel that acts as an excellent lubricant for pulling wire and cable. This lubricant wipes off the cable quickly and cleanly before terminating or splicing. It is a modified version of our WL gel lubricant for cold weather applications. read less

3M™ Wire Pulling Lubricant Wintergrade WLW is non staining for a quick and easy cleanup. This lubric...150 read more

3M™ Wire Pulling Lubricant Wintergrade WLW is non staining for a quick and easy cleanup. This lubricant gel withstands a wide temperature range of 10 to 110 degrees F (-12 to 43 degrees C). The thick gel is easy to apply onto cables without runs, drips or residue. CSA Certified and RoHS 2011/65/EU Compliant. read less

3M™ Wire Pulling Lubricant Wax WLX is a gray, wax based emulsion that has excellent lubricating properties for smooth, low tension wire and cable pulling. This wax wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction, which lessens the chance of cable jacket damage from high pulling forces.

3M™ Wire Pulling Lubricant Wax WLX is a gray, wax based emulsion that has excellent lubricating properties for smooth, low tension wire and cable pulling. This wax wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction, which lessens the chance of cable jacket damage from high pulling forces. read less

3M™ Wire Pulling Lubricant Wax WLX is a thick, consistent lubricant that does not liquefy or separat...150 read more

3M™ Wire Pulling Lubricant Wax WLX is a thick, consistent lubricant that does not liquefy or separate with hot aging. It scoops and applies easily to wire and cable without runs or drips in hot temperatures, and it will not evaporate too soon after pulls. The lubricant's low coefficient of friction lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the preferred choice for wet weather applications. read less

3M™ Wire Pulling Lubricant Spray WLS is a clear, high performance, gel-type liquid that helps to wet and coat the cables in difficult or complex cable pulls, reducing the chance of enhanced THHN cable damage from high pulling forces. The material is non staining and affords quick and easy cleanup.

3M™ Wire Pulling Lubricant Spray WLS is a clear, high performance, gel-type liquid that helps to wet and coat the cables in difficult or complex cable pulls, reducing the chance of enhanced THHN cable damage from high pulling forces. The material is non staining and affords quick and easy cleanup. read less

3M™ Wire Pulling Lubricant Spray WLS is a highly concentrated liquid that continues to lubricate, ev...150 read more

3M™ Wire Pulling Lubricant Spray WLS is a highly concentrated liquid that continues to lubricate, even after drying. It withstands a wide temperature range of 20 to 120 degrees F (-6.7 to 49 degrees C). The spray dispenser makes it suitable for a variety of jobs. UL Listed and RoHS 2011/65/EU Compliant. read less

3M™ Wire Pulling Lubricant Wintergrade WLW is a translucent, green polymer gel that acts as an excellent lubricant for pulling wire and cable. This lubricant wipes off the cable quickly and cleanly before terminating or splicing. It is a modified version of our WL gel lubricant for cold weather applications.

3M™ Wire Pulling Lubricant Wintergrade WLW is a translucent, green polymer gel that acts as an excellent lubricant for pulling wire and cable. This lubricant wipes off the cable quickly and cleanly before terminating or splicing. It is a modified version of our WL gel lubricant for cold weather applications. read less

3M™ Wire Pulling Lubricant Wintergrade WLW is non staining for a quick and easy cleanup. This lubric...150 read more

3M™ Wire Pulling Lubricant Wintergrade WLW is non staining for a quick and easy cleanup. This lubricant gel withstands a wide temperature range of 10 to 110 degrees F (-12 to 43 degrees C). The thick gel is easy to apply onto cables without runs, drips or residue. CSA Certified and RoHS 2011/65/EU Compliant. read less

3M™ Wire Pulling Lubricant Wax WLX is a gray, wax based emulsion that has excellent lubricating properties for smooth, low tension wire and cable pulling. This wax wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction, which lessens the chance of cable jacket damage from high pulling forces.

3M™ Wire Pulling Lubricant Wax WLX is a gray, wax based emulsion that has excellent lubricating properties for smooth, low tension wire and cable pulling. This wax wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction, which lessens the chance of cable jacket damage from high pulling forces. read less

3M™ Wire Pulling Lubricant Wax WLX is a thick, consistent lubricant that does not liquefy or separat...150 read more

3M™ Wire Pulling Lubricant Wax WLX is a thick, consistent lubricant that does not liquefy or separate with hot aging. It scoops and applies easily to wire and cable without runs or drips in hot temperatures, and it will not evaporate too soon after pulls. The lubricant's low coefficient of friction lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the preferred choice for wet weather applications. read less