Products
$178.15 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Industrial Insulated Protective Cap Kit is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing interfaces. The protective cap is used for permanent or temporary installation on bushings, junctions or feed thru devices. This kit is 15 kV voltage rated and 200 amp current rated.
3M™ Industrial Insulated Protective Cap Kit is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing interfaces. The protective cap is used for permanent or temporary installation on bushings, junctions or feed thru devices. This kit is 15 kV voltage rated and 200 amp current rated.
3M™ Industrial Insulated Protective Cap Kit includes an insulated protective cap with stranded coppe...150
3M™ Industrial Insulated Protective Cap Kit includes an insulated protective cap with stranded copper ground wire, silicone lubricant and an installation instruction sheet. The protective cap offers a fully shielded insulating cover for energized bushings that meet the requirements of ANS/IEEE Standard 386.
- Electrically insulates and mechanically seals loadbreak bushing interfaces
- Provides fully shielded, insulating cover for energized bushings
- Suitable for permanent or temporary installation on bushings, junctions or feed-thru devices
- Meets ANSI/IEEE Standard 386 requirement
- Electrically insulates and mechanically seals loadbreak bushing interfaces
- Provides fully shielded, insulating cover for energized bushings
- Suitable for permanent or temporary installation on bushings, junctions or feed-thru devices
- Meets ANSI/IEEE Standard 386 requirement
- UPC
- 054007046646
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 200 A
- Amperage Rating:
- 200 A
- Insulation Diameter Range:
- 5810
3M™ Industrial Insulated Protective Cap Kit is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing interfaces. The protective cap is used for permanent or tem...
$178.15 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shri...150
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shrink jacketing tube, 2 silicone lubricants and more. It provides installation information for wire shield, tape shield, UniShield® and jacketed concentric, neutral type solid dielectric cables. For use with 5815 kits to provide for It is suitable for dead ending, splicing and connecting to dead front apparatus like switches, switchgear and transformers that are equipped with bushings. It has an insulating plug that provides a safe means of testing the circuit without disturbing the bolted connection. Simply adding or removing modular components helps the system for future modification. Meets ANSI/IEEE Standard 386.
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- UPC
- 054007042358
- UNSPSC
- 39121450
- Country of Origin
- USA
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with...
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shri...150
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shrink jacketing tube, 2 silicone lubricants and more. It provides installation information for wire shield, tape shield, UniShield® and jacketed concentric, neutral type solid dielectric cables. For use with 5815 kits to provide for It is suitable for dead ending, splicing and connecting to dead front apparatus like switches, switchgear and transformers that are equipped with bushings. It has an insulating plug that provides a safe means of testing the circuit without disturbing the bolted connection. Simply adding or removing modular components helps the system for future modification. Meets ANSI/IEEE Standard 386.
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- UPC
- 054007042372
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 600 A
- Size:
- 3/0 AWG; 4/0 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 5000 V
- Amperage Rating:
- 600 A
- Insulation:
- 1
- Insulation Diameter Range:
- 0.640-0.760 in
- Shielding Type:
- Jacketed Concentric Neutral (JCN); Tape Shield; UniShield(R); Wire Shield
- Size:
- 3/0 AWG; 4/0 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 5000 V
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with...
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shri...150
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shrink jacketing tube, 2 silicone lubricants and more. It provides installation information for wire shield, tape shield, UniShield® and jacketed concentric, neutral type solid dielectric cables. For use with 5815 kits to provide for It is suitable for dead ending, splicing and connecting to dead front apparatus like switches, switchgear and transformers that are equipped with bushings. It has an insulating plug that provides a safe means of testing the circuit without disturbing the bolted connection. Simply adding or removing modular components helps the system for future modification. Meets ANSI/IEEE Standard 386.
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- UPC
- 054007042389
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 600 A
- Size:
- 1 AWG; 2 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 15,000 V
- Amperage Rating:
- 600 A
- Insulation:
- 1
- Insulation Diameter Range:
- 0.640-0.760 in
- Shielding Type:
- Jacketed Concentric Neutral (JCN); Tape Shield; UniShield(R); Wire Shield
- Size:
- 1 AWG; 2 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 15,000 V
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with...
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shri...150
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shrink jacketing tube, 2 silicone lubricants and more. It provides installation information for wire shield, tape shield, UniShield® and jacketed concentric, neutral type solid dielectric cables. For use with 5815 kits to provide for It is suitable for dead ending, splicing and connecting to dead front apparatus like switches, switchgear and transformers that are equipped with bushings. It has an insulating plug that provides a safe means of testing the circuit without disturbing the bolted connection. Simply adding or removing modular components helps the system for future modification. Meets ANSI/IEEE Standard 386.
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- UPC
- 054007042440
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 600 A
- Size:
- 2/0 AWG; 3/0 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 8,000/15,000 V
- Amperage Rating:
- 600 A
- Insulation:
- 100%; 133%
- Insulation Diameter Range:
- 0.720-0.845 in
- Shielding Type:
- Jacketed Concentric Neutral (JCN); Tape Shield; UniShield(R); Wire Shield
- Size:
- 2/0 AWG; 3/0 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 8,000/15,000 V
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with...
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shri...150
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shrink jacketing tube, 2 silicone lubricants and more. It provides installation information for wire shield, tape shield, UniShield® and jacketed concentric, neutral type solid dielectric cables. For use with 5815 kits to provide for It is suitable for dead ending, splicing and connecting to dead front apparatus like switches, switchgear and transformers that are equipped with bushings. It has an insulating plug that provides a safe means of testing the circuit without disturbing the bolted connection. Simply adding or removing modular components helps the system for future modification. Meets ANSI/IEEE Standard 386.
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- UPC
- 054007042594
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 600 A
- Size:
- 3/0 AWG; 4/0 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 5,000/8,000 V
- Amperage Rating:
- 600 A
- Insulation:
- 100%; 133%
- Insulation Diameter Range:
- 0.720-0.845 in
- Shielding Type:
- Jacketed Concentric Neutral (JCN); Tape Shield; UniShield(R); Wire Shield
- Size:
- 3/0 AWG; 4/0 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 5,000/8,000 V
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with...
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shri...150
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shrink jacketing tube, 2 silicone lubricants and more. It provides installation information for wire shield, tape shield, UniShield® and jacketed concentric, neutral type solid dielectric cables. For use with 5815 kits to provide for It is suitable for dead ending, splicing and connecting to dead front apparatus like switches, switchgear and transformers that are equipped with bushings. It has an insulating plug that provides a safe means of testing the circuit without disturbing the bolted connection. Simply adding or removing modular components helps the system for future modification. Meets ANSI/IEEE Standard 386.
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- UPC
- 054007042600
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 600 A
- Size:
- 250 kcmil; 4/0 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 5,000/8,000 V
- Amperage Rating:
- 600 A
- Insulation:
- 100%; 133%
- Insulation Diameter Range:
- 0.720-0.845 in
- Shielding Type:
- Jacketed Concentric Neutral (JCN); Tape Shield; UniShield(R); Wire Shield
- Size:
- 250 kcmil; 4/0 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 5,000/8,000 V
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with...
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with the 3M Modular Splicing System 5815 Series that is rated for 5 to 25 kV and 600 amp industrial shielded power cables.
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shri...150
3M™ Modular Splicing Kit 5815 includes 1 cable adapter, 1 aluminum compressed connector, 1 cold shrink jacketing tube, 2 silicone lubricants and more. It provides installation information for wire shield, tape shield, UniShield® and jacketed concentric, neutral type solid dielectric cables. For use with 5815 kits to provide for It is suitable for dead ending, splicing and connecting to dead front apparatus like switches, switchgear and transformers that are equipped with bushings. It has an insulating plug that provides a safe means of testing the circuit without disturbing the bolted connection. Simply adding or removing modular components helps the system for future modification. Meets ANSI/IEEE Standard 386.
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- Splices tape shield, wire shield, UniShield® and JCN cables
- Suitable for use with a splicing kit, tap splicing kit, equipment kit and dead-end kit
- ANSI Certified and IEEE Approved
- UPC
- 054007042617
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 600 A
- Size:
- 1/0 AWG; 2/0 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 15,000 V
- Amperage Rating:
- 600 A
- Insulation:
- 1
- Insulation Diameter Range:
- 0.720-0.845 in
- Shielding Type:
- Jacketed Concentric Neutral (JCN); Tape Shield; UniShield(R); Wire Shield
- Size:
- 1/0 AWG; 2/0 AWG
- Type:
- Modular Splice
- Voltage Rating:
- 15,000 V
3M™ Modular Splicing Kit 5815 is a fully shielded separable connector system. It allows a complete dead front connection that is suitable for operating in submerged or locations. This kit is used with...
$302.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders