.jpg)
.png)
Products
$154.69 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00 (16–10• mm). Notes:• Connectors are not included in the kit. Use only CSA certified...
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00 (16–10• mm). Notes:• Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. • Amount of armorcast needed is based on two half-lapped layers and 15’ rolls.
150
- Designed for use with armor power cable
- Used for indoor and outdoor installations
- Perfect for use in aerial, direct-burial and submersible applications
- Rated for up to 1 kV applications
- Designed for use with armor power cable
- Used for indoor and outdoor installations
- Perfect for use in aerial, direct-burial and submersible applications
- Rated for up to 1 kV applications
- UPC
- 054007431732
- UNSPSC
- 39121718
- Country of Origin
- USA
- Type:
- Inline Splice
- Voltage Rating:
- 1k V
- Cable Size:
- 1 AWG; 1/0 AWG; 2 AWG
- Cable Type:
- Armored Power Cable
- Number Of Cables:
- 3
- Type:
- Inline Splice
- Voltage Rating:
- 1k V
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. Fo...
$154.69 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$549.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00 (16–10• mm). Notes:• Connectors are not included in the kit. Use only CSA certified...
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00 (16–10• mm). Notes:• Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. • Amount of armorcast needed is based on two half-lapped layers and 15’ rolls.
150
- Designed for use with armor power cable
- Used for indoor and outdoor installations
- Perfect for use in aerial, direct-burial and submersible applications
- Rated for up to 1 kV applications
- Designed for use with armor power cable
- Used for indoor and outdoor installations
- Perfect for use in aerial, direct-burial and submersible applications
- Rated for up to 1 kV applications
- UPC
- 054007431756
- UNSPSC
- 39121718
- Country of Origin
- USA
- Type:
- Inline Splice
- Voltage Rating:
- 1k V
- Cable Size:
- 250 kcmil; 300 kcmil; 350 kcmil; 400 kcmil; 500 kcmil
- Cable Type:
- Armored Power Cable
- Number Of Cables:
- 3
- Type:
- Inline Splice
- Voltage Rating:
- 1k V
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. Fo...
$549.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$790.84 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00 (16–10• mm). Notes:• Connectors are not included in the kit. Use only CSA certified...
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00 (16–10• mm). Notes:• Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. • Amount of armorcast needed is based on two half-lapped layers and 15’ rolls.
150
- Designed for use with armor power cable
- Used for indoor and outdoor installations
- Perfect for use in aerial, direct-burial and submersible applications
- Rated for up to 1 kV applications
- Designed for use with armor power cable
- Used for indoor and outdoor installations
- Perfect for use in aerial, direct-burial and submersible applications
- Rated for up to 1 kV applications
- UPC
- 054007431763
- UNSPSC
- 39121718
- Country of Origin
- USA
- Type:
- Inline Splice
- Voltage Rating:
- 1k V
- Number Of Cables:
- 3
- Type:
- Inline Splice
- Voltage Rating:
- 1k V
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. Fo...
$790.84 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$160.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
The 3M™ Cold Shrink Splicing Products are designed using the proprietary cold shrink delivery system developed by 3M. Products are supplied prestretched on a removable core for efficiency and ease of installation. 3M™ Cold Shrink Splices 5740 Series are used for single conductor, non-shielded 5/8 kV cables.Each kit is a cold shrink design and contains enough material to insulate three splices. Connectors are not included and must be ordered separately.Note: Cable sizes shown below are for standa...
The 3M™ Cold Shrink Splicing Products are designed using the proprietary cold shrink delivery system developed by 3M. Products are supplied prestretched on a removable core for efficiency and ease of installation. 3M™ Cold Shrink Splices 5740 Series are used for single conductor, non-shielded 5/8 kV cables.Each kit is a cold shrink design and contains enough material to insulate three splices. Connectors are not included and must be ordered separately.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
150
- Designed for use with 10000, 11000 and 20000 Series inline compression connectors
- The rubber mastic filler removes time-consuming penciling of cable insulation
- Perfect for splicing non-shielded, wet/dry solid dielectric power cables
- Rated for 5/8 kV applications
- Designed for use with 10000, 11000 and 20000 Series inline compression connectors
- The rubber mastic filler removes time-consuming penciling of cable insulation
- Perfect for splicing non-shielded, wet/dry solid dielectric power cables
- Rated for 5/8 kV applications
- UPC
- 054007494911
- UNSPSC
- 39121718
- Country of Origin
- USA
- Type:
- Inline Splice
- Voltage Rating:
- 625 V
- Cable Size:
- 4 AWG; 6 AWG; 8 AWG
- Number Of Cables:
- 1
- Type:
- Inline Splice
- Voltage Rating:
- 625 V
The 3M™ Cold Shrink Splicing Products are designed using the proprietary cold shrink delivery system developed by 3M. Products are supplied prestretched on a removable core for efficiency and ease of...
$160.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$3,771.49 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5760 Series Cold Shrink Inline Splice Kit with 2131 compound, is designed for splicing shielded, 5/8 to 15 kV armored or non armored cables. It is used in cable trays, junction boxes and cable racks/hangers, as well as aerial and wet or dry locations.
3M™ 5760 Series Cold Shrink Inline Splice Kit with 2131 compound, is designed for splicing shielded, 5/8 to 15 kV armored or non armored cables. It is used in cable trays, junction boxes and cable racks/hangers, as well as aerial and wet or dry locations.
3M™ 5760 Series Cold Shrink Inline Splice Kits contain a resin that constructs a tough replacement f...150
3M™ 5760 Series Cold Shrink Inline Splice Kits contain a resin that constructs a tough replacement for cable armor and/or a jacket. The cold shrink insulators offer electrical insulation while the tapes provide electrical shielding. The flexible jacketing resin helps the splice to bend easily with the cable and is suitable for cable tray bends. The resin is self curing, resists abrasion and moisture. RoHS 2011/65/EU Compliant.
- Splices shielded cables
- The constant force springs provide a connection for ground braid jumpers
- Rated for 5/8 to 15 kV applications
- The insulators are made of EPDM for a long-term seal and offer easy installation
- Splices shielded cables
- The constant force springs provide a connection for ground braid jumpers
- Rated for 5/8 to 15 kV applications
- The insulators are made of EPDM for a long-term seal and offer easy installation
- UPC
- 051128591703
- UNSPSC
- 39121718
- Country of Origin
- USA
3M™ 5760 Series Cold Shrink Inline Splice Kit with 2131 compound, is designed for splicing shielded, 5/8 to 15 kV armored or non armored cables. It is used in cable trays, junction boxes and cable rac...
$3,771.49 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$585.21 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing...
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
150
- Designed to provide protection for bulkhead termination connectors
- Offers protection from wet and salt-fog installation environments
- Ideal for use in standard and hazardous locations
- Insulator is formulated with EPDM rubber which contains no chlorides or sulfur
- Designed to provide protection for bulkhead termination connectors
- Offers protection from wet and salt-fog installation environments
- Ideal for use in standard and hazardous locations
- Insulator is formulated with EPDM rubber which contains no chlorides or sulfur
- UPC
- 054007430292
- UNSPSC
- 39121718
- Country of Origin
- USA
- Cable Minimum Outside Diameter:
- 2.90 in
- Connector Maximum Installed Length:
- 13.50 in
- Connector Maximum Outside Diameter:
- 6.00 in
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog ins...
$585.21 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$128.30 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00 (16–10• mm). Notes:• Connectors are not included in the kit. Use only CSA certified...
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00 (16–10• mm). Notes:• Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. • Amount of armorcast needed is based on two half-lapped layers and 15’ rolls.
150
- Designed for use with armor power cable
- Used for indoor and outdoor installations
- Perfect for use in aerial, direct-burial and submersible applications
- Rated for up to 1 kV applications
- Designed for use with armor power cable
- Used for indoor and outdoor installations
- Perfect for use in aerial, direct-burial and submersible applications
- Rated for up to 1 kV applications
- UPC
- 054007431725
- UNSPSC
- 39121718
- Country of Origin
- USA
- Type:
- Inline Splice
- Voltage Rating:
- 1k V
- Cable Size:
- 4 AWG; 6 AWG; 8 AWG
- Cable Type:
- Power Cable
- Number Of Cables:
- 3
- Type:
- Inline Splice
- Voltage Rating:
- 1k V
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. Fo...
$128.30 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$349.65 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing...
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
150
- Designed to provide protection for bulkhead termination connectors
- Offers protection from wet and salt-fog installation environments
- Ideal for use in standard and hazardous locations
- Insulator is formulated with EPDM rubber which contains no chlorides or sulfur
- Designed to provide protection for bulkhead termination connectors
- Offers protection from wet and salt-fog installation environments
- Ideal for use in standard and hazardous locations
- Insulator is formulated with EPDM rubber which contains no chlorides or sulfur
- UPC
- 054007430230
- UNSPSC
- 39121718
- Country of Origin
- USA
- Cable Minimum Outside Diameter:
- 0.66 in
- Connector Maximum Installed Length:
- 4.80 in
- Connector Maximum Outside Diameter:
- 2.20 in
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog ins...
$349.65 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders