$362.29 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5430 Series Molded Rubber QS Splice Kit is a 35kV inline splice designed to use on jacketed concentric neutral (JCN) and concentric neutral (CN) cables with copper or aluminum conductors. The jacketing kit is needed for JCN cable.
3M™ 5430 Series Molded Rubber QS Splice Kit is a 35kV inline splice designed to use on jacketed concentric neutral (JCN) and concentric neutral (CN) cables with copper or aluminum conductors. The jacketing kit is needed for JCN cable.
3M™ 5430 Series Molded Rubber QS II Splice Kit includes a splice body, 2 end caps, a packet of silic...150
3M™ 5430 Series Molded Rubber QS II Splice Kit includes a splice body, 2 end caps, a packet of silicone grease and instructions. The continuous current rating of each splice is the same as the current rating of the cable that it is sized to accommodate. The kit meets the requirements of IEEE 404 standards.
- Inline splice for use on jacketed concentric neutral (JCN) and concentric neutral (CN) cables
- Jacketing kit is required for JCN cable
- Rated for 35 kV cables
- Meets the requirements of IEEE 404 standards
- Inline splice for use on jacketed concentric neutral (JCN) and concentric neutral (CN) cables
- Jacketing kit is required for JCN cable
- Rated for 35 kV cables
- Meets the requirements of IEEE 404 standards
- UPC
- 054007312222
- UNSPSC
- 26121649
- Country of Origin
- USA
- Type:
- Inline
- Voltage Rating:
- 35,000 V
- Cable Type:
- Concentric Neutral (CN); Jacketed Concentric Neutral (JCN)
- Conductor Size:
- 1/0 AWG Stranded
- Connector:
- CI-1/0A
- Insulation OD Range:
- 1.060 - 1.210 Inch
- Number of Conductors:
- 1
- Product Technology:
- Molded Rubber
- Stranded Conductor Sizes:
- 1/0 AWG
- Type:
- Inline
- Voltage Rating:
- 35,000 V
5535A-1/0-CU
$1,274.94 /ea
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A Series are inline splices for joining 35 kV tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties.
| Attributed Data | Included |
|---|---|
| Cable Type | Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield Yes |
| Conductor Material | Copper Yes |
| Conductor Size | 1/0 AWG Yes |
| Connector | 10005 Yes |
| Product Technology | Cold Shrink Yes |
5411A-CI-1/0
$102.70 /ea
3M™ 5411/5412 Series Molded Rubber QS II Splice Kit is a 1 piece inline splice designed to use on 15kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. The cold shrink jacket has peroxide cured EPDM rubber construction to ensure moisture resistance and durability.
| Attributed Data | Included |
|---|---|
| Cable Type | Concentric Neutral (CN); Jacketed Concentric Neutral (JCN) Yes |
| Connector | CI-1/0 Yes |
| Insulation OD Range | 0.775 - 0.90 Inch Yes |
| Product Technology | Molded Rubber Yes |
| Stranded Conductor Sizes | 1/0 AWG (220 mil) Yes |
| Type | Inline Yes |
5514A-4/0-AL
$651.20 /ea
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
| Attributed Data | Included |
|---|---|
| Cable Type | Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield Yes |
| Conductor Material | Aluminum; Copper Yes |
| Conductor Size | 4/0 AWG Yes |
| Connector | 20008 Yes |
| Product Technology | Cold Shrink Yes |
| Type | Inline Yes |
| Product Image |
|
|
|
|---|---|---|---|
|
5535A-1/0-CU
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A Series are inline splices for joining 35 kV tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. The cold shrink splice body is a one-pi...
$1,274.94 / EA
|
5411A-CI-1/0
3M™ 5411/5412 Series Molded Rubber QS II Splice Kit is a 1 piece inline splice designed to use on 15kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. The cold shrink jacket has peroxide cured EPDM rubber construction to ensure m...
$102.70 / EA
|
5514A-4/0-AL
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design...
$651.20 / EA
|
|
| Attributed Data | |||
| Cable Type | Concentric Neutral (CN); Jacketed Concentric Neutral (JCN) Concentric Neutral (CN); Jacketed Concentric Neutral (JCN) | Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield | |
| Conductor Material | Aluminum; Copper Aluminum; Copper | Copper Copper | |
| Conductor Size | 1/0 AWG 1/0 AWG | 4/0 AWG 4/0 AWG | |
| Connector | 10005 10005 | 20008 20008 | CI-1/0 CI-1/0 |
| Insulation OD Range | 0.775 - 0.90 Inch 0.775 - 0.90 Inch | ||
| Number of Conductors | 1 1 | ||
| Product Technology | Cold Shrink Cold Shrink | Molded Rubber Molded Rubber | |
| Stranded Conductor Sizes | 1/0 AWG (220 mil) 1/0 AWG (220 mil) | ||
| Type | Inline Inline | ||
| Voltage Rating | 15,000 V 15,000 V | 35,000 V 35,000 V | |
| Add a product to the cart | Show more details | Show more details | Show more details |
Recently Viewed
-
3TY6501-1L
SIEMENS INDUSTRY, INC.
RIGTH, F.3TB46 TO 3TB50 SECOND.AUXIL.CONTACT BLOCK
See more details -
-
C3F006KDS
HAMMOND POWER SOLUTIONS INC /IMARK GROUP
600V Class Commercial Potted Three Phase Distribution Transformer, 480 PV, 240D SV, 6 kVA
See more details -
D51138A
DVI LIGHTING INC.
Unfortunately, we do not have a description available for D51138A. Please call (800) 462-7733...
See more details -
5432-CI-1/0A
3M
3M™ 5430 Series Molded Rubber QS Splice Kit is a 35kV inline splice designed to use on jacketed concentric neutral (JCN) and concentric neutral (CN) c...
See more details