$640.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers...150
The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability.The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one splice.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- UPC
- 051128534878
- UNSPSC
- 26121649
- Country of Origin
- USA
5535A-1/0-CU
$1,274.94 /ea
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A Series are inline splices for joining 35 kV tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties.
| Attributed Data | Included |
|---|---|
| Cable Type | Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield Yes |
| Conductor Material | Copper Yes |
| Conductor Size | 1/0 AWG Yes |
| Connector | 10005 Yes |
| Product Technology | Cold Shrink Yes |
5411A-CI-1/0
$102.70 /ea
3M™ 5411/5412 Series Molded Rubber QS II Splice Kit is a 1 piece inline splice designed to use on 15kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. The cold shrink jacket has peroxide cured EPDM rubber construction to ensure moisture resistance and durability.
| Attributed Data | Included |
|---|---|
| Cable Type | Concentric Neutral (CN); Jacketed Concentric Neutral (JCN) Yes |
| Connector | CI-1/0 Yes |
| Insulation OD Range | 0.775 - 0.90 Inch Yes |
| Product Technology | Molded Rubber Yes |
| Stranded Conductor Sizes | 1/0 AWG (220 mil) Yes |
| Type | Inline Yes |
5514A-4/0-AL
$651.20 /ea
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
| Attributed Data | Included |
|---|---|
| Cable Type | Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield Yes |
| Conductor Material | Aluminum; Copper Yes |
| Conductor Size | 4/0 AWG Yes |
| Connector | 20008 Yes |
| Product Technology | Cold Shrink Yes |
| Type | Inline Yes |
| Product Image |
|
|
|
|---|---|---|---|
|
5535A-1/0-CU
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A Series are inline splices for joining 35 kV tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. The cold shrink splice body is a one-pi...
$1,274.94 / EA
|
5411A-CI-1/0
3M™ 5411/5412 Series Molded Rubber QS II Splice Kit is a 1 piece inline splice designed to use on 15kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. The cold shrink jacket has peroxide cured EPDM rubber construction to ensure m...
$102.70 / EA
|
5514A-4/0-AL
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design...
$651.20 / EA
|
|
| Attributed Data | |||
| Cable Type | Concentric Neutral (CN); Jacketed Concentric Neutral (JCN) Concentric Neutral (CN); Jacketed Concentric Neutral (JCN) | Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield | |
| Conductor Material | Aluminum; Copper Aluminum; Copper | Copper Copper | |
| Conductor Size | 1/0 AWG 1/0 AWG | 4/0 AWG 4/0 AWG | |
| Connector | 10005 10005 | 20008 20008 | CI-1/0 CI-1/0 |
| Insulation OD Range | 0.775 - 0.90 Inch 0.775 - 0.90 Inch | ||
| Number of Conductors | 1 1 | ||
| Product Technology | Cold Shrink Cold Shrink | Molded Rubber Molded Rubber | |
| Stranded Conductor Sizes | 1/0 AWG (220 mil) 1/0 AWG (220 mil) | ||
| Type | Inline Inline | ||
| Voltage Rating | 15,000 V 15,000 V | 35,000 V 35,000 V | |
| Add a product to the cart | Show more details | Show more details | Show more details |
Recently Viewed
-
ICN2S39T35I
ADVANCE TRANSFORMER
BALLAST, ELECTRONIC, CENTIUM, STARTING METHOD: PROGRAMMED START, LAMP TYPE: T5 HO 39W, FREQUENCY: 50/60, VOLTAGE RATING: 120-277, NUMBER OF LAMPS: 2,...
See more details -
-
5513A-2/0-AL
3M
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire sh...
See more details