$123.11 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Heat Shrink Tubing EPS-300 is a dual wall tubing provides the advantage of an integral, adhesive lined construction. This flame retardant tubing with a 3:1 shrink ratio offers insulation for 600V rated applications. The flexible polyolefin construction features an internal layer of thermoplastic adhesive, which offers moisture seal protection in automotive and marine applications.
3M™ Heat Shrink Tubing EPS-300 is a dual wall tubing provides the advantage of an integral, adhesive lined construction. This flame retardant tubing with a 3:1 shrink ratio offers insulation for 600V rated applications. The flexible polyolefin construction features an internal layer of thermoplastic adhesive, which offers moisture seal protection in automotive and marine applications.
3M™ Heat Shrink Tubing EPS-300 is color coded for quick and easy identification of the wire. It prov...150
3M™ Heat Shrink Tubing EPS-300 is color coded for quick and easy identification of the wire. It provides a skintight fit and strain relief protection for electronic components, wire splices, wire bundles and harness breakouts. This flame retardant tubing has a heat shrinkable outer wall that is irradiation cross linked for abrasion resistance and helps to maintain the high flow as well as good adhesion characteristics. When the tubing cools down, it forms a permanent, water resistant barrier. It withstands a wide temperature range of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
- Dual-wall construction provides abrasion resistance and moisture-seal protection
- Offers the advantage of integral, adhesive-lined construction
- Offers protection for automotive, truck, electronic components, wire splices, wire bundles and harness breakouts
- Made of black flexible polyolefin
- Dual-wall construction provides abrasion resistance and moisture-seal protection
- Offers the advantage of integral, adhesive-lined construction
- Offers protection for automotive, truck, electronic components, wire splices, wire bundles and harness breakouts
- Made of black flexible polyolefin
- UPC
- 051128597910
- UNSPSC
- 39121723
- Country of Origin
- USA
- Color:
- Black
- Type:
- Dual Wall (Adhesive Lined)
- Color:
- Black
- Continuous Operating Temperature:
- -67 degrees to 230 degrees
- Dielectric Strength:
- 700 V/mil
- Flammability:
- Self-extinguishing
- Heat Aging:
- Elongation 175%
- Heat Shock:
- No dripping, flowing, cracking
- Inside Diameter:
- 0.08
- Length:
- 48 in
- Low Temperature Flexibility:
- No Cracking
- Minimum Shrink Temperature:
- 176 degrees
- Outside Diameter:
- 0.25 in
- Shrink Ratio:
- 3 to 1
- Standard:
- UL, ABS, CSA
- Thickness:
- 0.04
- Type:
- Dual Wall (Adhesive Lined)
- Volume Resistivity:
- 10(14) ohm/cm
- Water Absorption:
- 0.30%
FP0.250WT200'L
$495.18 /ea
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications. This tubing has a 2:1 shrink ratio and provides flame retardant insulation for 600V rated applications. It has a flexible polyolefin construction that offers moisture seal protection.
BBI-3A-Red-50' Roll
$734.83 /ea
3M™ Bus Bar Heat Shrink Tubing BBI is a flame retardant tubing that provides reliable protection and insulation for 5 to 35 kV rated applications. The cross linked polyolefin construction is split and solvent resistant while offering good tracking resistance. It offers a tight fit for rectangular, square or round bus bars.
| Attributed Data | Included |
|---|---|
| Color | Red Yes |
| Heat Shock | Pass Yes |
| Inside Diameter | 1.01 Yes |
| Low Temperature Flexibility | Pass Yes |
| Shrink Ratio | Not Applicable Yes |
| Standard | ASTM, IEC, ANSI/IEEE Yes |
| Thickness | 0.049 Yes |
| Type | Bus Bar Yes |
| Volume Resistivity | 10(13) ohm/cm Yes |
| Water Absorption | 0.30% Yes |
ITCSN-1500-9"-Black-10 Pcs
$113.36 /ea
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyolefin construction that provides moisture seal protection.
| Attributed Data | Included |
|---|---|
| Color | Black Yes |
| Continuous Operating Temperature | 110 degrees - 230 degrees Yes |
| Heat Shock | No dripping, flowing, cracking Yes |
| Low Temperature Flexibility | No Cracking Yes |
| Minimum Shrink Temperature | 250 degrees Yes |
| Shrink Ratio | 3 to 1 Yes |
| Standard | UL, CSA Yes |
| Type | Heavy Wall Yes |
| Volume Resistivity | 1 x 10(14) ohm/cm Yes |
| Water Absorption | 0.05% Yes |
| Product Image |
|
|
|
|---|---|---|---|
|
FP0.250WT200'L
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications. This tubing has a 2:1 shrink ratio and provides fl...
$495.18 / EA
|
BBI-3A-Red-50' Roll
3M™ Bus Bar Heat Shrink Tubing BBI is a flame retardant tubing that provides reliable protection and insulation for 5 to 35 kV rated applications. The cross linked polyolefin construction is split and solvent resistant while offering good tracking r...
$734.83 / EA
|
ITCSN-1500-9"-Black-10 Pcs
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyolefin...
$113.36 / EA
|
|
| Attributed Data | |||
| Color | Black Black | Red Red | |
| Continuous Operating Temperature | 110 degrees - 230 degrees 110 degrees - 230 degrees | ||
| Dielectric Strength | 500 V/mil 500 V/mil | 550 V/mil 550 V/mil | |
| Heat Shock | No dripping, flowing, cracking No dripping, flowing, cracking | Pass Pass | |
| Inside Diameter | 1.01 1.01 | ||
| Length | 9 in 9 in | 50 ft 50 ft | |
| Low Temperature Flexibility | No Cracking No Cracking | Pass Pass | |
| Minimum Shrink Temperature | 250 degrees 250 degrees | ||
| Outside Diameter | 2.38 in 2.38 in | ||
| Shrink Ratio | 3 to 1 3 to 1 | Not Applicable Not Applicable | |
| Standard | ASTM, IEC, ANSI/IEEE ASTM, IEC, ANSI/IEEE | UL, CSA UL, CSA | |
| Thickness | 0.049 0.049 | ||
| Type | Bus Bar Bus Bar | Heavy Wall Heavy Wall | |
| Voltage Rating | 35,000 V 35,000 V | 600 V 600 V | |
| Volume Resistivity | 1 x 10(14) ohm/cm 1 x 10(14) ohm/cm | 10(13) ohm/cm 10(13) ohm/cm | |
| Water Absorption | 0.05% 0.05% | 0.30% 0.30% | |
| Add a product to the cart | Show more details | Show more details | Show more details |
Recently Viewed
-
12X36GSC1
MILBANK MANUFACTURING CO.
Wireway Cover Non-UL Listed 12x36 Screw Cover ANSI 61 Gray Steel
See more details -
3MDA-3M
3M
3M™ Fire Barrier Cast-In Device Metal Deck Adaptors are one-piece plastic body adaptors for one-step firestopping on fluted metal decks. Installers si...
See more details -
VGL1AM
APPLETON ELECTRIC CO
UNILETS Globe, Lamp Type: 150 WTT A21 Medium Incandescent, Fixture Wattage: 150 WTT, Material: Glass, Color: Amber, Finish: Natural, Standard: UL 1598...
See more details -
-
EPS300-1/4-48"-Black-Hdr-12 Pcs
3M
3M™ Heat Shrink Tubing EPS-300 is a dual wall tubing provides the advantage of an integral, adhesive lined construction. This flame retardant tubing w...
See more details