$319.90 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
manufacturer discounts
learn about discounts
- $322.46 for $300.00+
- $307.10 for $500.00+
- $294.31 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
TKO Master Electrician's Hole Cutter Kit, Carbide Tip, Consist Of 1: Two SmoothStart 7/8 IN 1-1/8 IN, 1-3/8 IN, 1-3/4 IN, 2 IN And 2-1/2 IN Replacement Tips, Consist Of 2: Carrying Case, 6 Pieces, For Fast Cutting Of Clean, Round Holes And Designed Specifically For Sheet Metal Cutting Even Stainless Steel
TKO Master Electrician's Hole Cutter Kit, Carbide Tip, Consist Of 1: Two SmoothStart 7/8 IN 1-1/8 IN, 1-3/8 IN, 1-3/4 IN, 2 IN And 2-1/2 IN Replacement Tips, Consist Of 2: Carrying Case, 6 Pieces, For Fast Cutting Of Clean, Round Holes And Designed Specifically For Sheet Metal Cutting Even Stainless Steel
TKO™ Hole Cutters offer the most efficient and clean cutter replacement for traditional knockouts, b...150
TKO™ Hole Cutters offer the most efficient and clean cutter replacement for traditional knockouts, by making smooth holes in a fraction of the time at a fraction of the cost. Specifically designed to cut sheet metal, TKO cutters will even cut stainless steel with fine grained, carbide tips. The innovative design includes the exclusive SmoothStart™ replaceable pilot drill, which guides the cutter to the surface, avoiding cutter damage and providing smoother holes. An integral overdrill flange prevents cutter penetration beyond the sheet metal. When it comes to quality, performance and durability, IDEAL is the professional’s choice for carbide tipped hole cutters
- Integrated arbor provides solid rotation
- SmoothStart™ Pilot Drill prevents bit from “walking” on smooth surfaces
- Precision ground carbide teeth for fast cutting of clean, burr-free holes
- Designed specifically for sheet metal and stainless steel
- Built-in over drill flange prevents penetration beyond the sheet metal
- Integrated arbor provides solid rotation
- SmoothStart™ Pilot Drill prevents bit from “walking” on smooth surfaces
- Precision ground carbide teeth for fast cutting of clean, burr-free holes
- Designed specifically for sheet metal and stainless steel
- Built-in over drill flange prevents penetration beyond the sheet metal
- UPC
- 783250670697
- UNSPSC
- 27113204
- Country of Origin
- TWN
- Material:
- Carbide Tip
- Type:
- Master Electrician's Hole Cutter Kit
- Consist Of 1:
- Two SmoothStart 7/8 IN 1-1/8 IN; 1-3/8 IN; 1-3/4 IN; 2 IN And 2-1/2 IN Replacement Tips
- Consist Of 2:
- Carrying Case
- Material:
- Carbide Tip
- Sub Brand:
- TKO
- Type:
- Master Electrician's Hole Cutter Kit
KCC2-LS
$444.87 /ea
Driver sold separately - For use with LS50L2 or LS100X Intelli-PUNCH battery-hydraulic knockout drivers. Knurled edge on punches for better grip. Slug-Buster® punch profile splits slugs for easy slug removal. New die design optimized for widest range of materials and drivers. Laser markings for quick part identification. Alignment markings for improved accuracy. Easy threading - draw studs with "dog point" tip helps eliminate cross-threading. Hex key access for easy removal from tool. Made in the USA
| Attributed Data | Included |
|---|---|
| Consist Of 1 | 1/2" - 2" conduit size Slug-Buster® punches Yes |
| Consist Of 2 | 1/2" - 2" conduit size dies Yes |
| Consist Of 3 | 7/16" hydraulic draw stud Yes |
| Consist Of 4 | 3/4" hydraulic draw stud Yes |
| Consist Of 4 | 7/16" hydraulic draw stud Yes |
| Consists Of 5 | 3/4" hydraulic draw stud Yes |
| Consists Of 5 | KCC-LS2 carrying case Yes |
| Material | Punch up to 10 ga mild steel or 12 ga stainless steel. Yes |
| Size | 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm) Yes |
| Type | 1/2" - 2" conduit size knockout upgrade set (driver sold separately) Yes |
KCC2-QD
$425.55 /ea
Driver sold separately - For use with Quick Draw® or Quick Draw 90® hydraulic knockout drivers. Knurled edge on punches for better grip. Slug-Buster® punch profile splits slugs for easy slug removal. New die design optimized for widest range of materials and drivers. Laser markings for quick part identification. Alignment markings for improved accuracy. Easy threading - draw studs with "dog point" tip helps eliminate cross-threading. Hex key access for easy removal from tool. Made in the USA
| Attributed Data | Included |
|---|---|
| Consist Of 1 | 1/2" - 2" conduit size Slug-Buster® punches Yes |
| Consist Of 2 | 1/2" - 2" conduit size dies Yes |
| Consist Of 3 | 7/16" short hydraulic draw stud Yes |
| Consist Of 4 | 3/4" short hydraulic draw stud Yes |
| Consists Of 5 | KCC-QD2 carrying case Yes |
| Material | Punch up to 10 ga mild steel or 12 ga stainless steel Yes |
| Size | 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm) Yes |
| Type | 1/2" - 2" conduit size knockout upgrade set (driver sold separately) Yes |
KCC4-LS
$1,334.68 /ea
Driver sold separately - For use with Intelli-PUNCH battery-hydraulic knockout drivers. Knurled edge on punches for better grip. Slug-Buster® punch profile splits slugs for easy slug removal. New die design optimized for widest range of materials and drivers. Laser markings for quick part identification. Alignment markings for improved accuracy. Easy threading - draw studs with "dog point" tip helps eliminate cross-threading. Hex key access for easy removal from tool. Made in the USA
| Attributed Data | Included |
|---|---|
| Consist Of 1 | 1/2" - 2" conduit size Slug-Buster® punches Yes |
| Consist Of 2 | 2-1/2" - 4" conduit size Standard Round punches Yes |
| Consist Of 3 | 1/2" - 4" conduit size dies Yes |
| Consist Of 3 | 7/16" hydraulic draw stud Yes |
| Consist Of 4 | 3/4" hydraulic draw stud Yes |
| Consist Of 4 | 7/16" hydraulic draw stud Yes |
| Consists Of 5 | 3/4" hydraulic draw stud Yes |
| Consists Of 6 | 1-1/8" hydraulic draw stud Yes |
| Consists Of 7 | KCC-LS4 carrying case Yes |
| Material | Punch up to 10 ga mild steel or 12 ga stainless steel. See driver instruction manual for complete capacity rating. Yes |
| Size | 1/2" - 4" conduit size knockouts (hole size: 0.89" - 4.54" or 22.5 mm - 115.4 mm) Yes |
| Type | 1/2" - 4" conduit size knockout upgrade set (driver sold separately) Yes |
| Product Image |
|
|
|
|---|---|---|---|
|
KCC2-LS
Driver sold separately - For use with LS50L2 or LS100X Intelli-PUNCH battery-hydraulic knockout drivers. Knurled edge on punches for better grip. Slug-Buster® punch profile splits slugs for easy slug removal. New die design optimized for widest ran...
$444.87 / EA
|
KCC2-QD
Driver sold separately - For use with Quick Draw® or Quick Draw 90® hydraulic knockout drivers. Knurled edge on punches for better grip. Slug-Buster® punch profile splits slugs for easy slug removal. New die design optimized for widest range of mat...
$425.55 / EA
|
KCC4-LS
Driver sold separately - For use with Intelli-PUNCH battery-hydraulic knockout drivers. Knurled edge on punches for better grip. Slug-Buster® punch profile splits slugs for easy slug removal. New die design optimized for widest range of materials a...
$1,334.68 / EA
|
|
| Attributed Data | |||
| Consist Of 1 | 1/2" - 2" conduit size Slug-Buster® punches 1/2" - 2" conduit size Slug-Buster® punches | ||
| Consist Of 2 | 1/2" - 2" conduit size dies 1/2" - 2" conduit size dies | 2-1/2" - 4" conduit size Standard Round punches 2-1/2" - 4" conduit size Standard Round punches | |
| Consist Of 3 | 1/2" - 4" conduit size dies 1/2" - 4" conduit size dies | 7/16" hydraulic draw stud 7/16" hydraulic draw stud | 7/16" short hydraulic draw stud 7/16" short hydraulic draw stud |
| Consist Of 4 | 3/4" hydraulic draw stud 3/4" hydraulic draw stud | 3/4" short hydraulic draw stud 3/4" short hydraulic draw stud | 7/16" hydraulic draw stud 7/16" hydraulic draw stud |
| Consists Of 5 | 3/4" hydraulic draw stud 3/4" hydraulic draw stud | KCC-LS2 carrying case KCC-LS2 carrying case | KCC-QD2 carrying case KCC-QD2 carrying case |
| Consists Of 6 | 1-1/8" hydraulic draw stud 1-1/8" hydraulic draw stud | ||
| Consists Of 7 | KCC-LS4 carrying case KCC-LS4 carrying case | ||
| Material | Punch up to 10 ga mild steel or 12 ga stainless steel Punch up to 10 ga mild steel or 12 ga stainless steel | Punch up to 10 ga mild steel or 12 ga stainless steel. Punch up to 10 ga mild steel or 12 ga stainless steel. | Punch up to 10 ga mild steel or 12 ga stainless steel. See driver instruction manual for complete capacity rating. Punch up to 10 ga mild steel or 12 ga stainless steel. See driver instruction manual for complete capacity rating. |
| Size | 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm) 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm) | 1/2" - 4" conduit size knockouts (hole size: 0.89" - 4.54" or 22.5 mm - 115.4 mm) 1/2" - 4" conduit size knockouts (hole size: 0.89" - 4.54" or 22.5 mm - 115.4 mm) | |
| Type | 1/2" - 2" conduit size knockout upgrade set (driver sold separately) 1/2" - 2" conduit size knockout upgrade set (driver sold separately) | 1/2" - 4" conduit size knockout upgrade set (driver sold separately) 1/2" - 4" conduit size knockout upgrade set (driver sold separately) | |
| Add a product to the cart | Show more details | Show more details | Show more details |