$100.93 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
In stock (0)
Lead time: over 7 days
may be longer on small orders
Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits - These Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting ApplicationsStreetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits features include: Streetlighting Y-Type Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact Designed for Use in StreetLight Hand Holes Completely Waterproofnbsp; Rub...
Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits - These Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting ApplicationsStreetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits features include: Streetlighting Y-Type Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact Designed for Use in StreetLight Hand Holes Completely Waterproofnbsp; Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature AL9CU Dual Rated for Both Copper and Aluminum Cables Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods 30 Amp 600 Volts Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included Order Qty of 1 = 1 Piece Below is more info on our Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits
150
- Streetlighting Y-Type Mechanical Breakaway Disconnect Kits - These Streetlighting Y-Type Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications
- Streetlighting Y-Type Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
- Designed for Use in StreetLight Hand Holes
- Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
- Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
- 67066 Accepts Standard Cartridge Fuses 13/32" X 1-1/2" - No Glass Fuses
- Streetlighting Y-Type Mechanical Breakaway Disconnect Kits - These Streetlighting Y-Type Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications
- Streetlighting Y-Type Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
- Designed for Use in StreetLight Hand Holes
- Completely Waterproof Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
- Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
- 67066 Accepts Standard Cartridge Fuses 13/32" X 1-1/2" - No Glass Fuses
- UPC
- 601986670678
- UNSPSC
- 39121718
- Country of Origin
- US
- Configuration:
- Y Type
- Connector Type:
- Submersible Streetlighting Disconnect
- MATERIAL:
- Aluminum
- MAXIMUM VOLTAGE:
- 600 Volts
- Product Length:
- 9-3/4"
- Wire Range Run:
- #14-#2
- Wire Range Tap:
- 12-4
CPT-3-1/2-3M
$585.21 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
| Attributed Data | Included |
|---|---|
| Cable Minimum Outside Diameter | 2.90 in Yes |
| Connector Maximum Installed Length | 13.50 in Yes |
| Connector Maximum Outside Diameter | 6.00 in Yes |
5513A-3/0-CU
$651.20 /ea
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
| Attributed Data | Included |
|---|
CPT-3/4-3M
$326.36 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
| Attributed Data | Included |
|---|---|
| Cable Minimum Outside Diameter | 0.66 in Yes |
| Connector Maximum Installed Length | 4.80 in Yes |
| Connector Maximum Outside Diameter | 1.90 in Yes |
| Product Image |
|
|
|
|---|---|---|---|
|
CPT-3-1/2-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$585.21 / EA
|
5513A-3/0-CU
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design...
$651.20 / EA
|
CPT-3/4-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$326.36 / EA
|
|
| Attributed Data | |||
| Cable Minimum Outside Diameter | 0.66 in 0.66 in | 2.90 in 2.90 in | |
| Connector Maximum Installed Length | 4.80 in 4.80 in | 13.50 in 13.50 in | |
| Connector Maximum Outside Diameter | 1.90 in 1.90 in | 6.00 in 6.00 in | |
| Add a product to the cart | Show more details | Show more details | Show more details |