It looks like you are viewing Generac products. Do you want to see the Generator Sizing Guide?
Products
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$579.00 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
This 100 amp automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that r...
This 100 amp automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that reason, codes require it in all standby electric system installations. The transfer switch consists of a transfer mechanism, utility service disconnect circuit breaker and a smart A/C module incorporating fuses and two terminal blocks for transfer switch connections.
RXSW100A3 - Smart Switch 100 Amp Service Rated 120/240 1Ø NEMA 3R150
RXSW100A3 - Smart Switch 100 Amp Service Rated 120/240 1Ø NEMA 3R
- Through the use of digital power technology, Generac's singe-phase service rated transfer switch has the ability to manage 4 individual HVAC loads with no additional hardware
- Designed for use with single-phase generators that utilize an Evolution or Nexus Controller
- Aluminum ENEMA/UL type 3R (indoor-outdoor) enclosure with electrostatically applied and baked power paint provides additional corrosion protection
- Simplify installation with a board that combines load management and transfer switch hardware
- Decreases transfer switch complexity
- Smaller fuses integrated into the control board
- Gain even more flexibility when used in tandem with Smart Management Module
- The smart A/C module manages the loads by shedding the connected loads in the event of a drop in generator frequency (overload)
- Single-phase, 120/240-volt; UL listed transfer switch
- Through the use of digital power technology, Generac's singe-phase service rated transfer switch has the ability to manage 4 individual HVAC loads with no additional hardware
- Designed for use with single-phase generators that utilize an Evolution or Nexus Controller
- Aluminum ENEMA/UL type 3R (indoor-outdoor) enclosure with electrostatically applied and baked power paint provides additional corrosion protection
- Simplify installation with a board that combines load management and transfer switch hardware
- Decreases transfer switch complexity
- Smaller fuses integrated into the control board
- Gain even more flexibility when used in tandem with Smart Management Module
- The smart A/C module manages the loads by shedding the connected loads in the event of a drop in generator frequency (overload)
- Single-phase, 120/240-volt; UL listed transfer switch
- UPC
- 696471069648
This 100 amp automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automati...
$579.00 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
- Certification Agency
- PROP65
- Certification Number
- Warning: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
$8.25 / EA
Unfortunately, we do not have a description available for OL3059-SPARK. Please call (800) 462-7733 for more information.
Unfortunately, we do not have a description available for OL3059-SPARK. Please call (800) 462-7733 for more information.
- UPC
Unfortunately, we do not have a description available for OL3059-SPARK. Please call (800) 462-7733 for more information.
$8.25 / EA
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
- Certification Agency
- PROP65
- Certification Number
- Warning: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
$1,199.00 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
Unfortunately, we do not have a description available for RXUW200A3. Please call (800) 462-7733 for more information.
Unfortunately, we do not have a description available for RXUW200A3. Please call (800) 462-7733 for more information.
- UPC
Unfortunately, we do not have a description available for RXUW200A3. Please call (800) 462-7733 for more information.
$1,199.00 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$629.00 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
This Generac automatic transfer switch is designed to operate with air cooled generators. This transfer switch has an integrated load center to allow for essential circuit backup. It is especially useful where the main service is large, and only a portion of the building will be served by the generator, or when the main electrical breaker panel is located outdoors. It comes with a 16 space breaker panel that ban be populated with the appropriate sized breakers needed for any application.
This Generac automatic transfer switch is designed to operate with air cooled generators. This transfer switch has an integrated load center to allow for essential circuit backup. It is especially useful where the main service is large, and only a portion of the building will be served by the generator, or when the main electrical breaker panel is located outdoors. It comes with a 16 space breaker panel that ban be populated with the appropriate sized breakers needed for any application.
RXG16EZA3 - 16-circuit 100 Amp Load Center ATS - NEMA 3 CUL150
RXG16EZA3 - 16-circuit 100 Amp Load Center ATS - NEMA 3 CUL
- All weather aluminum NEMA 3R enclosure
- Heavy Duty Generac Contactor
- 16 space breaker panel
- Suitable for use in optional standby systems
- All weather aluminum NEMA 3R enclosure
- Heavy Duty Generac Contactor
- 16 space breaker panel
- Suitable for use in optional standby systems
- UPC
- 696471069907
This Generac automatic transfer switch is designed to operate with air cooled generators. This transfer switch has an integrated load center to allow for essential circuit backup. It is especially use...
$629.00 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$83.99 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
Complement the contoured enclosure with a fascia base wrap that snaps together around the bottom of your standby generator. Fascia continues the sleek, contoured appearance as well as offering protection from rodents and insects by covering the lifting holes located in the base. Fascia is standard on Generac 22 KW air-cooled model
Complement the contoured enclosure with a fascia base wrap that snaps together around the bottom of your standby generator. Fascia continues the sleek, contoured appearance as well as offering protection from rodents and insects by covering the lifting holes located in the base. Fascia is standard on Generac 22 KW air-cooled model
Generac 7027 - Fascia for Air Cooled Generator - Bisque150
Generac 7027 - Fascia for Air Cooled Generator - Bisque
- Kit easily snaps in place around the base of your air-cooled generator
- Finishes off your generator with a sleek, contoured appearance
- Fascia covers the lifting holes located in the base
- Only fits air-cooled generators manufactured after 2016
- Kit easily snaps in place around the base of your air-cooled generator
- Finishes off your generator with a sleek, contoured appearance
- Fascia covers the lifting holes located in the base
- Only fits air-cooled generators manufactured after 2016
- UPC
- 696471070279
Complement the contoured enclosure with a fascia base wrap that snaps together around the bottom of your standby generator. Fascia continues the sleek, contoured appearance as well as offering protect...
$83.99 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
If you need help or can't find what you are looking for we can assist you...
Give us a call at (800) 462-7733. Our team is waiting to help.
Support available: Monday-Friday: 7am - 5pm EST