$12.26 / EA
manufacturer discounts
learn about discounts
- $11.44 for $300.00+
- $10.90 for $500.00+
- $10.44 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Medium-Wall Heat Shrink, Thickness: 091 IN, Length: 4 (End Cap) IN, Volume Resistivity: 1014 OHM.CM For IEC 93, Dielectric Strength: Less Than 15 KV/MM IEC 243, Continuous Operating Temperature: -55 DEG CC To 110 DEG C IEC 216, Cable Range: 2/0 AWG - 500 MCM, Nominal Recoveredi.d. (max.): 0.310 IN, Expanded I.d. (min.): 0.980, Elongation At Break: ASTM D 638, Less Than 400%, Elongation Of Break After Aging: Less Than 300 PCT 150 DEG C, 168 HR
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Medium-Wall Heat Shrink, Thickness: 091 IN, Length: 4 (End Cap) IN, Volume Resistivity: 1014 OHM.CM For IEC 93, Dielectric Strength: Less Than 15 KV/MM IEC 243, Continuous Operating Temperature: -55 DEG CC To 110 DEG C IEC 216, Cable Range: 2/0 AWG - 500 MCM, Nominal Recoveredi.d. (max.): 0.310 IN, Expanded I.d. (min.): 0.980, Elongation At Break: ASTM D 638, Less Than 400%, Elongation Of Break After Aging: Less Than 300 PCT 150 DEG C, 168 HR
Creates a watertight seal to protect ends of power and control cordsProtects against oxidation, ozon...150
Creates a watertight seal to protect ends of power and control cordsProtects against oxidation, ozone, UV?radiation, etc.Coated with hot melt adhesive to ensure environment sealFits easily over end of cableProtect power cables up to 1000V and telecommunication cableRecommended for both open air and underground power distribution cables with PVC, lead or XLPE sheathsThermally stabilized cross-linked polylefin, coated with specially designed hot melt adhesiveUV resistant
- Creates a watertight seal to protect ends of power and control cords
- Protects against oxidation, ozone, UV radiation, etc
- Coated with hot melt adhesive to ensure environment seal
- Fits easily over end of cable
- Protect power cables up to 1000V and telecommunication cable
- Recommended for both open air and underground power distribution cables with PVC, lead or XLPE sheaths
- Thermally stabilized cross-linked polylefin, coated with specially designed hot melt adhesive
- UV resistant
- Creates a watertight seal to protect ends of power and control cords
- Protects against oxidation, ozone, UV radiation, etc
- Coated with hot melt adhesive to ensure environment seal
- Fits easily over end of cable
- Protect power cables up to 1000V and telecommunication cable
- Recommended for both open air and underground power distribution cables with PVC, lead or XLPE sheaths
- Thermally stabilized cross-linked polylefin, coated with specially designed hot melt adhesive
- UV resistant
- UPC
- 783250463824
- UNSPSC
- 39121723
- Country of Origin
- USA
- Type:
- Medium-Wall Heat Shrink
- Continuous Operating Temperature:
- -55 DEG CC To 110 DEG C IEC 216
- Dielectric Strength:
- Less Than 15 KV/MM IEC 243
- Length:
- 4 in
- Standard:
- RoHS
- Sub Brand:
- Thermo-Shrink®
- Thickness:
- 091 IN
- Type:
- Medium-Wall Heat Shrink
- Volume Resistivity:
- 1014 OHM.CM For IEC 93
ITCSN-2000-25'-Black-Reel
$277.64 /ea
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyolefin construction that provides moisture seal protection.
| Attributed Data | Included |
|---|---|
| Color | Black Yes |
| Continuous Operating Temperature | 110 degrees - 230 degrees Yes |
| Heat Shock | No dripping, flowing, cracking Yes |
| Low Temperature Flexibility | No Cracking Yes |
| Minimum Shrink Temperature | 250 degrees Yes |
| Shrink Ratio | 3 to 1 Yes |
| Standard | UL, CSA Yes |
| Type | Heavy Wall Yes |
| Volume Resistivity | 1 x 10(14) ohm/cm Yes |
| Water Absorption | 0.05% Yes |
FP301-1/16-48"-Black-250 Pcs
$224.81 /ea
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications. This tubing has a 2:1 shrink ratio and provides flame retardant insulation for 600V rated applications. It has a flexible polyolefin construction that offers moisture seal protection.
| Attributed Data | Included |
|---|---|
| Color | Black Yes |
| Dielectric Strength | 900 Volt Yes |
| Shrink Ratio | 2:01 Yes |
| Standard | UL Recognized, CSA Certified, ABS, and AMS 3636 & 3637 Yes |
| Type | Thin-Wall Flexible Polyolefin Yes |
SKE-25/63-3M
$69.13 /ea
3M™ Heat Shrink End Cap SKE provides mechanical and environmental protection as well as sealing to cable ends. The semi rigid, flame retardant polyolefin construction makes the end cap suitable for heavy duty applications. The adhesive lining forms a permanent, flexible and water resistant barrier.
| Attributed Data | Included |
|---|---|
| Color | Black Yes |
| Type | Heat Shrink Heavy-Duty End Cap Yes |
| Product Image |
|
|
|
|---|---|---|---|
|
ITCSN-2000-25'-Black-Reel
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyolefin...
$277.64 / EA
|
FP301-1/16-48"-Black-250 Pcs
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications. This tubing has a 2:1 shrink ratio and provides fl...
$224.81 / EA
|
SKE-25/63-3M
3M™ Heat Shrink End Cap SKE provides mechanical and environmental protection as well as sealing to cable ends. The semi rigid, flame retardant polyolefin construction makes the end cap suitable for heavy duty applications. The adhesive lining forms a...
$69.13 / EA
|
|
| Attributed Data | |||
| Color | Black Black | ||
| Continuous Operating Temperature | 110 degrees - 230 degrees 110 degrees - 230 degrees | ||
| Dielectric Strength | 500 V/mil 500 V/mil | 900 Volt 900 Volt | |
| Heat Shock | No dripping, flowing, cracking No dripping, flowing, cracking | ||
| Length | 0.63 in 0.63 in | 25 ft 25 ft | 48 in 48 in |
| Low Temperature Flexibility | No Cracking No Cracking | ||
| Minimum Shrink Temperature | 250 degrees 250 degrees | ||
| Outside Diameter | 0.0625 in 0.0625 in | ||
| Shrink Ratio | 2:01 2:01 | 3 to 1 3 to 1 | |
| Standard | UL, CSA UL, CSA | UL Recognized, CSA Certified, ABS, and AMS 3636 & 3637 UL Recognized, CSA Certified, ABS, and AMS 3636 & 3637 | |
| Type | Heat Shrink Heavy-Duty End Cap Heat Shrink Heavy-Duty End Cap | Heavy Wall Heavy Wall | Thin-Wall Flexible Polyolefin Thin-Wall Flexible Polyolefin |
| Voltage Rating | 600 V 600 V | ||
| Volume Resistivity | 1 x 10(14) ohm/cm 1 x 10(14) ohm/cm | ||
| Water Absorption | 0.05% 0.05% | ||
| Add a product to the cart | Show more details | Show more details | Show more details |