$93.53 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.
3M™ Scotchcast™ 72 N Series Inline Splice Kit helps in sealing collars or splice body ends, and the...150
3M™ Scotchcast™ 72 N Series Inline Splice Kit helps in sealing collars or splice body ends, and the jumper wire with clips offers solderless shield continuity on shielded cables. RoHS 2011/65/EU Compliant?.
- Rigid body splice for joining signal and control cables
- Fits unshielded construction of plastic or rubber-jacketed cables
- Designed for inline splicing of underground systems, joining of cable reel ends, direct burial applications and repair of cable failures
- Rated for 1 kV applications
- Rigid body splice for joining signal and control cables
- Fits unshielded construction of plastic or rubber-jacketed cables
- Designed for inline splicing of underground systems, joining of cable reel ends, direct burial applications and repair of cable failures
- Rated for 1 kV applications
- UPC
- 054007106258
- UNSPSC
- 39121718
- Country of Origin
- USA
- Type:
- Resin Splice
- Voltage Rating:
- 1k V
- Cable Type:
- Non-Shielded Signal/Control Cable; Shielded Signal/Control Cable
- Insulation OD Range:
- 0.50 - 1.00 Inch
- Sub Brand:
- Scotchcast
- Type:
- Resin Splice
- Voltage Rating:
- 1k V
CPT-3-1/2-3M
$585.21 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 2.90 in Yes |
Connector Maximum Installed Length | 13.50 in Yes |
Connector Maximum Outside Diameter | 6.00 in Yes |
5513A-3/0-CU
$651.20 /ea
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
Attributed Data | Included |
---|
CPT-3/4-3M
$326.36 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 0.66 in Yes |
Connector Maximum Installed Length | 4.80 in Yes |
Connector Maximum Outside Diameter | 1.90 in Yes |
Product Image | |||
---|---|---|---|
CPT-3-1/2-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$585.21 / EA
|
5513A-3/0-CU
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design...
$651.20 / EA
|
CPT-3/4-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$326.36 / EA
|
|
Attributed Data | |||
Cable Minimum Outside Diameter | 0.66 in 0.66 in | 2.90 in 2.90 in | |
Connector Maximum Installed Length | 4.80 in 4.80 in | 13.50 in 13.50 in | |
Connector Maximum Outside Diameter | 1.90 in 1.90 in | 6.00 in 6.00 in | |
Add a product to the cart | Show more details | Show more details | Show more details |