Call Us Today: (800) 462-7733
Dale Electric Supply Co Inc
Conduit/Pipe to Flange Clip, Side Mount 1/2-3/4
Conduit/Pipe to Flange Clip, Side Mount 1/2-3/4

Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more information.

812M24SM

$2.41 / EA

volume discounts

  • $2.22 for 100+

manufacturer discounts
learn about discounts

  • $2.12 for $1,300.00+
  • $2.00 for $2,000.00+
  • $1.92 for $3,000.00+

In stock (0)
Lead time: over 7 days
may be longer on small orders

Must be purchased in multiples of 100

Conduit/Pipe to Flange Clip, Side Mount 1/2-3/4" EMT, 1/8�1/4" Flange

Conduit/Pipe to Flange Clip, Side Mount 1/2-3/4" EMT, 1/8�1/4" Flange

150

  • Supports conduit/pipe or cable from beam flanges
  • Snap close clip pivots a full 360�
  • Requires only a hammer to install
  • Supports conduit/pipe or cable from beam flanges
  • Snap close clip pivots a full 360�
  • Requires only a hammer to install
UPC
782856112105
UNSPSC
39121701
Country of Origin
US
Material:
Spring Steel
Type:
Snap Close Clamps
Finish:
nVent CADDY Armour
Flange Thickness (Imperial) <Max>:
1/4 in
Material:
Spring Steel
Outer Diameter (Imperial) <Max>:
1.181 in
Outer Diameter (Imperial) <Min>:
0.709 in
Standard:
cULus®
Static Load (lb):
25 lb
Sub Brand:
CADDY
Type:
Snap Close Clamps
Compare With Similar Items
Appleton Parallel Type Clamp, Size: 2-1/2 IN, Material: Castings: Malleable Iron, Hardware: Steel, Finish: Castings: Hot Dip, Hardware: Mechanically Galvanized, Standard: CSA C22.2 No. 18.4, CSA 065178, For Rigid, IMC And EMT

PC250PAR

$14.32 /ea

Appleton Parallel Type Clamp, Size: 2-1/2 IN, Material: Castings: Malleable Iron, Hardware: Steel, Finish: Castings: Hot Dip, Hardware: Mechanically Galvanized, Standard: CSA C22.2 No. 18.4, CSA 065178, For Rigid, IMC And EMT

See more details
EMT Conduit Clamp Body, Conduit Size 1/2 to 1-1/2 Inch (EMT), Material Malleable Iron, Finish Zinc Plated, Standard Package 50, Weight 65 Lb Per 100

CH

$13.47 /ea

EMT Conduit Clamp Body, Conduit Size 1/2 to 1-1/2 Inch (EMT), Material Malleable Iron, Finish Zinc Plated, Standard Package 50, Weight 65 Lb Per 100

Must be purchased in multiples of 50
See more details
Appleton Clamp Back, Size: 1 IN, Material: Malleable Iron, Finish: Hot Dipped Galvanized, Length: 3.19 IN, Width: 1.31 IN, Height: 0.56 IN, Bolt Diameter: 1/4 IN, Standard: CSA C22.2 No. 18.4, CSA 065178, For Used To Support Runs Of RMC, IMC And

CLB100MN

$1.94 /ea

Appleton Clamp Back, Size: 1 IN, Material: Malleable Iron, Finish: Hot Dipped Galvanized, Length: 3.19 IN, Width: 1.31 IN, Height: 0.56 IN, Bolt Diameter: 1/4 IN, Standard: CSA C22.2 No. 18.4, CSA 065178, For Used To Support Runs Of RMC, IMC And

Attributed Data Included
Finish Hot-Dip Galvanize Yes
Material Malleable Iron Yes
Standard CSA C22.2 No. 18.4; CSA 065178 Yes
Type Clamp Back Yes
Must be purchased in multiples of 20
See more details

Customers Also Bought

  • placeholder image

    10/3MC

    COPPER WIRE MAJOR BRAND
    WIRE 10/3MC ARMORED CABLE (FT)
    See more details

  • 12/2MC

    COPPER WIRE MAJOR BRAND
    WIRE 12/2MC 1000FT REEL ARMORED CABLE (FT)
    See more details
  • placeholder image

    12/3MC

    COPPER WIRE MAJOR BRAND
    WIRE 12/3MC ARMORED CABLE (FT)
    See more details
  • placeholder image

    16M24SM

    ERICO PRODUCTS INC
    Conduit/Pipe to Flange Clip, Side Mount, 1" EMT, 1/8�1/4" Flange
    See more details

ADDED TO CART