$112.00 / EA
manufacturer discounts
learn about discounts
- $104.00 for $200.00+
- $100.00 for $500.00+
- $96.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Synthetic minimum load interface
Synthetic minimum load interface
150
- Provides capability for certain Lutron dimmers to control low-wattage loads from 0 watts up to the dimmer's minimum rating
- Presents a simulated load to the dimmer to meet the minimum load requirements even when the actual load is smaller.
- Works with forward phase or leading edge dimmers and reverse phase or trailing edge dimmers.
- Models available for 120V and 220-240V input power.
- This load-side equipment installs on the zone wiring in parallel with the lighting load.
- Dissapates a maximum of 10 watts when the controlling dimmer is near high-end.
- Provides capability for certain Lutron dimmers to control low-wattage loads from 0 watts up to the dimmer's minimum rating
- Presents a simulated load to the dimmer to meet the minimum load requirements even when the actual load is smaller.
- Works with forward phase or leading edge dimmers and reverse phase or trailing edge dimmers.
- Models available for 120V and 220-240V input power.
- This load-side equipment installs on the zone wiring in parallel with the lighting load.
- Dissapates a maximum of 10 watts when the controlling dimmer is near high-end.
- UPC
- 027557257978
- UNSPSC
- 39121009
- Country of Origin
- US
- Type:
- Synthetic minimum load interface
- Enclosure:
- Plastic
- Environmental Conditions:
- 0 to 40 degrees Celsius. 0 to 90% humidity, non-condensing
- Height:
- 4.56 in
- Input Voltage:
- 120 VAC
- Insulation:
- Plastic
- Length:
- NaN in
- Mounting:
- Surface or recess
- Output Voltage:
- 120 VAC
- Standard:
- UL, CSA
- Sub Brand:
- GRAFIK Eye
- Type:
- Synthetic minimum load interface
- Width:
- 2.55 in
PHPM-3F-120-WH
$206.50 /ea
120V phase control input 3-wire fluorescent output power module, White finish only
| Attributed Data | Included |
|---|---|
| Cooling | Air Yes |
| Enclosure | Plastic Yes |
| Environmental Conditions | 0 to 40 degrees Celsius. Relative humidity less than 90% non-condensing. Indoor use only. Yes |
| Input Voltage | 120 VAC Yes |
| Insulation | Plastic Yes |
| Mounting | Surface or recess Yes |
| Output Voltage | 120 VAC Yes |
| Sub Brand | GRAFIK Eye Yes |
| Type | 3-wire fluorescent power module Yes |
C5-XPJ-16A
$304.50 /ea
EcoSystem Switching Power Module for Non-Dim Loads
| Attributed Data | Included |
|---|---|
| Sub Brand | EcoSystem Yes |
| Type | Switching Power Module Yes |
TVI-LMF-2A
$49.00 /ea
EcoSystem to ten volt interface
| Product Image |
|
|
|
|---|---|---|---|
|
PHPM-3F-120-WH
120V phase control input 3-wire fluorescent output power module, White finish only
$206.50 / EA
|
C5-XPJ-16A
EcoSystem Switching Power Module for Non-Dim Loads
$304.50 / EA
|
TVI-LMF-2A
EcoSystem to ten volt interface
$49.00 / EA
|
|
| Attributed Data | |||
| Add a product to the cart | Show more details | Show more details | Show more details |
Recently Viewed
-
-
-
SO Power Cord, 4/3
TPI CORPORATION
25 FT SO Power Cord, 3 conductors, 4 AWG, 70 AMP. For Use With FES Series Heat Wave Portable Electric & Wall or Ceiling Mounted Salamander
See more details -
PHPM-3F-120-WH
LUTRON SERVICES CO., INC.
120V phase control input 3-wire fluorescent output power module, White finish only
See more details -
