Categories Filtering by Manufacturer

49-56-8000

HOLE SAW THUNDRBLT PILOT DRILL 1/4INx4IN
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 49-56-8000 HOLE SAW THUNDRBLT

$2.47 each

$2.35 each for over 10



Full Description:
1/4" x 4"" High Speed Steel Pilot Bit Bullets: Thunderbolt® tapered web for added durability 135° split point provides accurate hole placement 3-flat shank won't slip in arbor or chuck Parabolic flute clears chips faster 00351"
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Arbors
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
hole saw
Special Features
Thunderbolt Tapered Web For Added Durability; 135 DEG Split Point Provides Accurate Hole Placement; 3-Flat Shank Won'T Slip In Arbor Or Chuck; Parabolic Flute Clears Chips Faster; Diameter: 1/4 IN
Overall Length
4
Material
High Speed Steel
GTIN-14: 
00045242200351
UPC: 
045242200351
UNSPSC: 
27112811
Height: 
5.6000 IN
Width: 
0.9000 IN
Length: 
0.2000 IN
Gross Weight: 
0.060 L
Country of Origin: 
CHN
Warranty
View Warranty
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov
MILWAUKEE ELECTRIC TOOL CORP.

TOOL REPAIR

Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: TOOL REPAIR

$0 each




49-56-8010

HOLE SAW THNDRBLT PILT DRL 1/4INx3-1/2IN
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 49-56-8010 HOLE SAW THNDRBLT P

$2.70 each




Full Description:
1/4" x 3-1/2"" High Speed Steel Pilot Bit Bullets: Thunderbolt® tapered web for added durability 135° split point provides accurate hole placement 3-flat shank won't slip in arbor or chuck Parabolic flute clears chips faster 00450"
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Arbors
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Special Features
Thunderbolt Tapered Web For Added Durability; 135 DEG Split Point Provides Accurate Hole Placement; 3-Flat Shank Won't Slip In Arbor Or Chuck; Parabolic Flute Clears Chips Faster; Diameter: 1/4 IN
Application
For Drilling On Curved Surfaces, For Use With Portable Drills
Overall Length
3-1/2
Material
High Speed Steel
GTIN-14: 
00045242200450
UPC: 
045242200450
UNSPSC: 
27112811
Height: 
7.0900 IN
Width: 
1.8900 IN
Length: 
0.3000 IN
Gross Weight: 
0.050 L
Country of Origin: 
CHN
Warranty
View Warranty
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-56-0147

ICE HARDENED HOLE SAW 2-1/2 IN
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 49-56-0147 ICE HARDENED HOLE S

$9.30 each




Full Description:
Made in the USA, the Milwaukee® Hole Dozer™ Hole Saw features Rip Guard™, the strongest tooth form in the industry, backed by the Rip Guard™ Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard™ warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8PERC cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer™ includes Plug Jack™, an all access slot design that allows for full access during plug removal. The Plug Jack™ gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack™ increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250, and 49-56-9100. Bullets: Rip Guard™, the strongest tooth form in the industry Rip Guard™ Limited Lifetime Tooth Break Warranty Plug Jack™, an all access slot design for fast plug removal Bi-metal construction with 8PERC cobalt for increased wear resistance 93240
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Hole saws
Brand Name
Milwaukee
Sub Brand
Ice Hardened
Special Features
Ice Hardened Cryogenically Treated For Up To 50 PCT Longer Life; Optimized Tooth Form For Up To 2X Faster Cutting; Wide, Angled & Offset Slots For Easy Plug Access; Bi-Metal Construction With 8 PCT Cobalt For Increased Wear Resistance; Works With The Following Arbors: 49-56-7240, 49-56-7250, 49-56-9100, 49-56-7055, 49-56-7040, 49-56-7140 & 49-56-7150; Rpm Mild Steel: 135 RPM; Rpm Stainless Steel: 65 RPM; Rpm Cast Iron: 90 RPM; Rpm Aluminum: 205 RPM
Hole Diameter
2-1/2
GTIN-14: 
00045242193240
UPC: 
045242193240
UNSPSC: 
27112826
Height: 
2.6000 IN
Width: 
2.9000 IN
Length: 
2.9000 IN
Gross Weight: 
0.460 L
Country of Origin: 
USA
Warranty
View Warranty
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov
MILWAUKEE ELECTRIC TOOL CORP.

49-56-9100

HOLE SAW LG ARBOR 7/16IN Q/C, NO WOBBLE
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 49-56-9100 HOLE SAW LG ARBOR 7

$14.53 each




Full Description:
7/16" Large Thread Quick Change Arbor Bullets: Tool-free operation Universal
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Arbors
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Quick Change
Special Features
Tool-Free Operation; Universal, Quick Change With All Brands Of Hole Saws; No Adapters Required; Durable Hardened Steel Construction; Fits All Hole Saws 1-1/4 IN And Larger; Fits All Drill Chucks 1/2 IN And Larger
Application
Fits All Hole Saws 1-1/4 IN And Larger; Fits All Drill Chucks 1/2 IN And Larger
Arbor Size
1-1/4 IN And Larger
Shank Diameter
7/16
Material
Hardened Carbon Steel And Alloy Steel
GTIN-14: 
00045242200832
UPC: 
045242200832
UNSPSC: 
27112811
Height: 
5.9000 IN
Width: 
3.6000 IN
Length: 
0.8000 IN
Gross Weight: 
0.350 L
MSDS
View MSDS
Spec Sheet
View Specification Sheet
Technical Drawing
View Technical Drawing
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-56-0102

ICE HARDENED HOLE SAW 1-3/4 IN
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 49-56-0102 ICE HARDENED HOLE S

$7.06 each




Full Description:
Made in the USA, the Milwaukee® Hole Dozer™ Hole Saw features Rip Guard™, the strongest tooth form in the industry, backed by the Rip Guard™ Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard™ warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8PERC cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer™ includes Plug Jack™, an all access slot design that allows for full access during plug removal. The Plug Jack™ gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack™ increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250, and 49-56-9100. Bullets: Rip Guard™, the strongest tooth form in the industry Rip Guard™ Limited Lifetime Tooth Break Warranty Plug Jack™, an all access slot design for fast plug removal Bi-metal construction with 8PERC cobalt for increased wear resistance 93097
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Hole saws
Brand Name
Milwaukee
Sub Brand
Ice Hardened
Type
49-56-Series Hole Saw
Special Features
Features: Ice Hardened Cryogenically Treated For Up To 50 PCT Longer Life; Optimized Tooth Form For Up To 2X Faster Cutting; Wide, Angled & Offset Slots For Easy Plug Access; Bi-Metal Construction With 8 PCT Cobalt For Increased Wear Resistance; Works With The Following Arbors: 49-56-7240, 49-56-7250, 49-56-9100, 49-56-7055, 49-56-7040, 49-56-7140 & 49-56-7150; Rpm Mild Steel: 195 RPM; Rpm Stainless Steel: 95 RPM; Rpm Cast Iron: 130 RPM; Rpm Aluminum: 295 RPM
Hole Diameter
1-3/4
Cutting Size
1-1/2 IN Depth
Pipe Tap Size
1-1/2
Idea Granular Category Code
2437
GTIN-14: 
00045242193097
UPC: 
045242193097
UNSPSC: 
27112826
Height: 
2.8000 IN
Width: 
2.0000 IN
Length: 
2.0000 IN
Gross Weight: 
0.280 L
Country of Origin: 
USA
Warranty
View Warranty
Technical Drawing
View Technical Drawing
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-56-7055

HOLE SAW LG ARBOR 7/16IN Q/C, THRU-HOLE
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 49-56-7055 HOLE SAW LG ARBOR 7

$15.53 each




Full Description:
7/16" Large Thread Quick Change Arbor Bullets: Tool-free operation Universal
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Arbors
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Quick Change
Special Features
Tool-Free Operation; Universal, Quick Change With All Brands Of Hole Saws; No Adapters Required; Hollow Shank For Full Pilot Bit Access; Durable Hardened Steel Construction; Fits All Hole Saws 1-1/4 IN And Larger & Fits All Drill Chucks 1/2 IN And Larger
Application
Fits All Hole Saws 1-1/4 IN And Larger & Fits All Drill Chucks 1/2 IN And Larger
Arbor Size
1-1/4 IN And Larger
Shank Diameter
7/16
Material
Hardened Carbon Steel And Alloy Steel
GTIN-14: 
00045242200207
UPC: 
045242200207
UNSPSC: 
27112811
Height: 
6.7000 IN
Width: 
4.7000 IN
Length: 
1.2000 IN
Gross Weight: 
0.600 L
MSDS
View MSDS
Spec Sheet
View Specification Sheet
Technical Drawing
View Technical Drawing
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov
MILWAUKEE ELECTRIC TOOL CORP.

48-89-9205

STEP BIT #5 1/4" - 1-3/8"""
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 48-89-9205 STEP BIT #5 1/4" -"

$76.82 each




Full Description:
Milwaukee® Step Drill Bits with JAM-FREE performance feature a dual-flute design delivering up to 2X faster hole times, up to 4X longer life and up to 50PERC more holes per battery charge than the competition. Ideal for drilling large and small-diameter holes in steel and plastic, these bits are Optimized for cordless drills in high speed. The Rapid Strike™ tip allows for fast, accurate starts that generate less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, hole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip™ shank ensures a solid connection with the drill chuck. The #5 Step Drill Bit has 10 hole sizes in 1/8" increments ranging from 1/4"" to 1-3/8"". Jam-Free performance in high speed with most professional 18 volt cordless drills with lithium-ion battery technology. Bullets: JAM-FREE Performance: Dual-flute design provides greater speed and control Up to 2X faster: Optimized for cordless drills in high speed Rapid Strike™ Tip: Creates fast
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Drill bit set
Brand Name
Milwaukee
GTIN-14: 
00045242307678
UPC: 
045242307678
UNSPSC: 
27112845
Height: 
5.8800 IN
Width: 
4.8800 IN
Length: 
1.3800 IN
Gross Weight: 
0.400 L
MSDS
View MSDS
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

48-22-9925

25FT STUD TAPE MEASURE
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 48-22-9925 25FT STUD TAPE MEAS

$25.31 each




Full Description:
Milwaukee Tool is delivering ground-breaking innovation to the core layout tool category with the introduction of STUD™ tape measures. Through new-to-world EXO360™ blade technology, STUD™ tape measures feature the longest-lasting blade that is rip and wear resistant. This technology allows the STUD™ tape measures to be the world’s first to overcome the number 1 tape durability concern: tape tear. Tape tear is the most common failure mode of tape measures, and can results from rapid retraction, bending or even stepping on the tape accidentally during measurement. STUD™ was completely designed from the ground-up to solve this issue once and for all through the first ever technology that protects the blade from rip and tear. Moreover, STUD™ offers 10X abrasion resistance of what current Milwaukee tape measures offer today so the numbers won’t wear out. Combined with a fully reinforced frame and heavy, impact-resistant overmold that can survive up to an 80 Ft. drop, STUD™ tape measures’ unmatched durability across the board means that users now have a tape they can truly depend on. 00666
Unspsc Family
Hand tools
Unspsc Class
Measuring and layout tools
Unspsc Commodity
Tape measures
Brand Name
Milwaukee
Sub Brand
STUD
Length
25
Thickness
3/4
Graduations
1/16
GTIN-14: 
00045242500666
UPC: 
045242500666
UNSPSC: 
27111801
Height: 
7.0500 IN
Width: 
4.3300 IN
Length: 
2.6000 IN
Gross Weight: 
1.300 L
Country of Origin: 
CHN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-56-0217

ICE HARDENED HOLE SAW 4-1/8 IN
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 49-56-0217 ICE HARDENED HOLE S

$14.96 each




Full Description:
Made in the USA, the Milwaukee® Hole Dozer™ Hole Saw features Rip Guard™, the strongest tooth form in the industry, backed by the Rip Guard™ Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard™ warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8PERC cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer™ includes Plug Jack™, an all access slot design that allows for full access during plug removal. The Plug Jack™ gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack™ increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250, and 49-56-9100. Bullets: Rip Guard™, the strongest tooth form in the industry Rip Guard™ Limited Lifetime Tooth Break Warranty Plug Jack™, an all access slot design for fast plug removal Bi-metal construction with 8PERC cobalt for increased wear resistance 93493
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Hole saws
Brand Name
Milwaukee
Sub Brand
Ice Hardened
Special Features
Ice Hardened Cryogenically Treated For Up To 50 PCT Longer Life; Optimized Tooth Form For Up To 2X Faster Cutting; Wide, Angled & Offset Slots For Easy Plug Access; Bi-Metal Construction With 8 PCT Cobalt For Increased Wear Resistance; Works With The Following Arbors: 49-56-7240, 49-56-7250, 49-56-9100, 49-56-7055, 49-56-7040, 49-56-7140 & 49-56-7150; Rpm Mild Steel: 80 RPM; Rpm Stainless Steel: 40 RPM; Rpm Cast Iron: 55 RPM; Rpm Aluminum: 120 RPM
Hole Diameter
4-1/8
GTIN-14: 
00045242193493
UPC: 
045242193493
UNSPSC: 
27112826
Height: 
2.6000 IN
Width: 
4.6000 IN
Length: 
4.6000 IN
Gross Weight: 
1.270 L
Country of Origin: 
USA
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

48-27-0621

BIT FLAT BORING 5/8 IN X 6 IN
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 48-27-0621 BIT FLAT BORING 5/8

$2.93 each




Full Description:
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee® 5/8" x 6"" Flat Boring Bit. This premium quality Flat Boring Bit is made of heat-treated high carbon steel
Unspsc Family
Hand tools
Unspsc Class
Cutting and crimping and punching tools
Unspsc Commodity
Flat wood bit
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Stubby
Special Features
5/8 IN Bit Diameter; 1/4 IN Shank Diameter; 6-1/8 IN Overall Length; Drill Point And Cutting Edges Can Be Resharpened
Application
For Bores Clean Holes At Any Angle In Wood, Plastic, Plywood And Formica
Bit Diameter
5/8
Overall Length
6-1/8
Shank Size
1/4
Drill Size
6 IN Depth
Material
Heat-Treated High-Carbon Steel
GTIN-14: 
00045242120857
UPC: 
045242120857
UNSPSC: 
27111539
Height: 
8.5000 IN
Width: 
2.1900 IN
Length: 
0.3200 IN
Gross Weight: 
0.110 L
MSDS
View MSDS
Warranty
View Warranty
Spec Sheet
View Specification Sheet
Technical Drawing
View Technical Drawing
Technical Drawing
View Video clip
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

48-00-5187

Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: SUPER SAWZALL BL 14T 9LG (5 PACK)

$11.18 each




MILWAUKEE ELECTRIC TOOL CORP.

48-13-0400

4PC BIT WOOD SPEED FEED™ SET
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 48-13-0400 4PC BIT WOOD SPEED

$20.37 each




Full Description:
The Milwaukee® 4-Piece x 6" Speed Feed Wood Bit Set lets you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts. The set includes 1/2""
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Drill bit set
Brand Name
Milwaukee
GTIN-14: 
00045242234448
UPC: 
045242234448
UNSPSC: 
27112845
Height: 
1.2500 IN
Width: 
9.1300 IN
Length: 
5.9600 IN
Gross Weight: 
0.720 L
MSDS
View MSDS
Warranty
View Warranty
Spec Sheet
View Specification Sheet
Technical Drawing
View Video clip
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

48-22-2202

3 PC INSULATED SCREWDRIVER
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 48-22-2202 3 PC INSULATED SCRE

$20.99 each




Full Description:
Milwaukee® 1000V Insulated Screwdrivers are the only UL® Classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 & NFPA 70E standards and meet the OSHA insulated tool requirement. Providing an uncompromising safety rating, Milwaukee Insulated Screwdrivers are flame retardant and impact resistant and feature a dual layer insulation for maximum protection and a visual wear indicator to issue a replacement warning to the user. Bullets: UL® Classified - Tested and certified to insulated tool standards: IEC 60900:2012 ASTM F1505-10 NFPA 70E 1000V Insulated Protection offers uncompromising safety Meets OSHA Insulated Tool Standard VDE & GS Certified Dual Layer Insulation offers visual wear indication for tool replacement Flame retardant & impact resistant handle and shank Lanyard Holes prevent tool drops and protect insulation from damage Visible ID Markings allows for quick tool identification on jobsite. 93766
Unspsc Family
Hand tools
Unspsc Class
Wrenches and drivers
Unspsc Commodity
Insulated screwdriver
Brand Name
Milwaukee
GTIN-14: 
00045242293766
UPC: 
045242293766
UNSPSC: 
27111736
Height: 
13.0000 IN
Width: 
5.0400 IN
Length: 
1.2600 IN
Gross Weight: 
0.830 L
Country of Origin: 
TWN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-56-0173

ICE HARDENED HOLE SAW 3 IN
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 49-56-0173 ICE HARDENED HOLE S

$9.53 each




Full Description:
Made in the USA, the Milwaukee® Hole Dozer™ Hole Saw features Rip Guard™, the strongest tooth form in the industry, backed by the Rip Guard™ Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard™ warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8PERC cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer™ includes Plug Jack™, an all access slot design that allows for full access during plug removal. The Plug Jack™ gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack™ increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250, and 49-56-9100. Bullets: Rip Guard™, the strongest tooth form in the industry Rip Guard™ Limited Lifetime Tooth Break Warranty Plug Jack™, an all access slot design for fast plug removal Bi-metal construction with 8PERC cobalt for increased wear resistance 93332
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Hole saws
Brand Name
Milwaukee
Sub Brand
Ice Hardened
Special Features
Ice Hardened Cryogenically Treated For Up To 50 PCT Longer Life; Optimized Tooth Form For Up To 2X Faster Cutting; Wide, Angled & Offset Slots For Easy Plug Access; Bi-Metal Construction With 8 PCT Cobalt For Increased Wear Resistance; Works With The Following Arbors: 49-56-7240, 49-56-7250, 49-56-9100, 49-56-7055, 49-56-7040, 49-56-7140 & 49-56-7150; Rpm Mild Steel: 115 RPM; Rpm Stainless Steel: 55 RPM; Rpm Cast Iron: 75 RPM; Rpm Aluminum: 170 RPM
Hole Diameter
3
GTIN-14: 
00045242193332
UPC: 
045242193332
UNSPSC: 
27112826
Height: 
2.6000 IN
Width: 
3.8000 IN
Length: 
3.8000 IN
Gross Weight: 
0.540 L
Country of Origin: 
USA
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov
previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | next