$139.00 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
manufacturer discounts
learn about discounts
- $164.40 for $1,250.00+
- $157.55 for $2,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
With the introduction of the new M4™ 2-speed screwdriver, Milwaukee Tool commits to a new line of cordless products in the 4 V category utilizing the company’s REDLITHIUM 2.0 battery technology. The new screwdriver incorporates the latest Milwaukee core technologies in motor, REDLITHIUM™ intelligence electronics and REDLITHIUM 2.0 batteries, increasing the tool’s power and run-time, while shrinking its size. Featuring 44 in-lbs of peak torque and a 21-position clutch with auto shut-off, the new...
With the introduction of the new M4™ 2-speed screwdriver, Milwaukee Tool commits to a new line of cordless products in the 4 V category utilizing the company’s REDLITHIUM 2.0 battery technology. The new screwdriver incorporates the latest Milwaukee core technologies in motor, REDLITHIUM™ intelligence electronics and REDLITHIUM 2.0 batteries, increasing the tool’s power and run-time, while shrinking its size. Featuring 44 in-lbs of peak torque and a 21-position clutch with auto shut-off, the new screwdriver offers improved torque control during repetitive applications. Two speeds, 200 and 600 RPM, offer further user control for precision work. At only 244 millimeters in length and under one pound, the M4™ screwdriver is easy to use with one hand, featuring 1/4 in. quick-change chuck for one-handed bit changes.
M4 1/4 in. Hex Screwdriver Kit (1 Bat)150
M4 1/4 in. Hex Screwdriver Kit (1 Bat)
- 21-position clutch setting with auto shut-off
- 44 inch-pounds of torque
- 2-speed gearbox: 200/600 RPM
- 2.0 Battery on M4 platform
- 21-position clutch setting with auto shut-off
- 44 inch-pounds of torque
- 2-speed gearbox: 200/600 RPM
- 2.0 Battery on M4 platform
- UPC
- 045242298167
- UNSPSC
- 27112703
- Country of Origin
- CHN
- Voltage Rating:
- 4 V
- Chuck Size:
- 1/4 INCH
- Speed:
- 600 RPM
- Sub Brand:
- M4
- Voltage Rating:
- 4 V
1007-1
$21.75 /ea
If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. The 1007-1 features 0 to 600 RPM, Quik-Lok® cord and can be used with our right angle drive attachment to increase versatility.
Attributed Data | Included |
---|---|
Speed | 0 - 600 RPM At No Load Yes |
Sub Brand | MILWAUKEE Yes |
0100-20
$130.00 /ea
High speed and torque optimize performance on small-bit applications. The 1/4” Magnum® Drill with QUIK-LOK® Cord features a powerful motor and double gear reduction for maximum productivity with small-diameter bits. The all-metal gear case and diaphragm provide high durability on the jobsite. The ergonomic, tactile grip and two-finger trigger optimize user comfort and balance. Add the convenience of a heavy-duty detachable cord, and you have unmatched value. Bullets: Powerful 7.0-amp motor: Delivers up to 2500 RPM with variable-speed control and reverse Heavy-duty keyed chuck with holder: Provides an industrial hold during drilling and fastening 360° Locking Side Handle: Produces maximum maneuverability and control QUIK-LOK® Cord: 8-ft. 3-wire grounded rubber cord provides easy storage and field replacement 00029
48-25-1002
$27.97 /ea
Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. Two feed screws are included.
Attributed Data | Included |
---|
Product Image | |||
---|---|---|---|
1007-1
If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. The 1007-1 features 0 to 600 RPM, Quik-Lok® cord and can...
$21.75 / EA
|
0100-20
High speed and torque optimize performance on small-bit applications. The 1/4” Magnum® Drill with QUIK-LOK® Cord features a powerful motor and double gear reduction for maximum productivity with small-diameter bits. The all-metal gear case and diaphr...
$130.00 / EA
|
48-25-1002
Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring...
$27.97 / EA
*
* This is the minimum price that we are able to advertise. Call us at
(800) 462-7733
and we will offer a lower price.
|
|
Attributed Data | |||
Amperage Rating | 7 A 7 A | ||
Chuck Size | 1/2 IN 1/2 IN | ||
Speed | 0 - 600 RPM At No Load 0 - 600 RPM At No Load | ||
Sub Brand | MILWAUKEE MILWAUKEE | ||
Voltage Rating | 120 VAC 120 VAC | ||
Add a product to the cart | Show more details | Show more details | Show more details |