ClearGlide Lubricant, Size: 1 QT, Container: Squeeze Bottle, Specific Gravity: 1.09, Plastic Safe: Yes, Slight Odor, Voc: 17.4 GPL (As Packaged, Minus Water), Working Temperature: 40 - 100 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Less Than 98 PCT, Percent Solid By Weight: Approximately 5 PCT, Clear, Colorless Gel, 7 - 8 pH, Solubility In Water: Infinite, Storage Temperature: 32 - 180 DEG F, Ul Listed, For Wire Pulling

ClearGlide Lubricant, Size: 1 QT, Container: Squeeze Bottle, Specific Gravity: 1.09, Plastic Safe: Yes, Slight Odor, Voc: 17.4 GPL (As Packaged, Minus Water), Working Temperature: 40 - 100 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Less Than 98 PCT, Percent Solid By Weight: Approximately 5 PCT, Clear, Colorless Gel, 7 - 8 pH, Solubility In Water: Infinite, Storage Temperature: 32 - 180 DEG F, Ul Listed, For Wire Pulling read less

IDEAL ClearGlide™ Wire pulling lubricant is a polymer-based formula well suited for all electrical a...150 read more

IDEAL ClearGlide™ Wire pulling lubricant is a polymer-based formula well suited for all electrical and datacom applications, and safe to use with all cable types. It is clear and colorless, and suitable for indoor as well as outdoor applications. This formula provides quick and easy clean up, and extraordinary lubricity for super-fast pulls. Its controlled evaporation rate is ideal for shorter runs. It remains stable over wide temperature ranges from 32°F to 180°F (0°C to 82°C) and dries to a semi-fluid film that won't clog conduit. It is convenient to apply by hand, brush, or pump, and is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. It comes in 1-qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed. read less

Winter-Gel™ 5 Gallon. Will not freeze until -25°F (-31°C). Reduces friction for easy pulling. Compatible with all cable insulation types. Cleans up quickly and easily. High lubricity. Can be used all year long. Environmentally safe.

Winter-Gel™ 5 Gallon. Will not freeze until -25°F (-31°C). Reduces friction for easy pulling. Compatible with all cable insulation types. Cleans up quickly and easily. High lubricity. Can be used all year long. Environmentally safe. read less

150

read less

3M™ Wire Pulling Lubricant Wax WLX is a gray, wax based emulsion that has excellent lubricating properties for smooth, low tension wire and cable pulling. This wax wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction, which lessens the chance of cable jacket damage from high pulling forces.

3M™ Wire Pulling Lubricant Wax WLX is a gray, wax based emulsion that has excellent lubricating properties for smooth, low tension wire and cable pulling. This wax wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction, which lessens the chance of cable jacket damage from high pulling forces. read less

3M™ Wire Pulling Lubricant Wax WLX is a thick, consistent lubricant that does not liquefy or separat...150 read more

3M™ Wire Pulling Lubricant Wax WLX is a thick, consistent lubricant that does not liquefy or separate with hot aging. It scoops and applies easily to wire and cable without runs or drips in hot temperatures, and it will not evaporate too soon after pulls. The lubricant's low coefficient of friction lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the preferred choice for wet weather applications. read less

Aqua-Gel IIP Lubricant, Size: 5 GAL, Container: Bucket, Specific Gravity: 0.98, Plastic Safe: Yes, Mild Odor, Voc: 1.2 GPL (As Packaged, Minus Water), Working Temperature: 40 - 100 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Approximately 90 PCT, Percent Solid By Weight: Approximately 10 PCT, Aqua Pourable Gel, 7 - 8 pH, Solubility In Water: Infinite, Storage Temperature: 32 - 180 DEG F, Ul Listed, For Cable Pulling

Aqua-Gel IIP Lubricant, Size: 5 GAL, Container: Bucket, Specific Gravity: 0.98, Plastic Safe: Yes, Mild Odor, Voc: 1.2 GPL (As Packaged, Minus Water), Working Temperature: 40 - 100 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Approximately 90 PCT, Percent Solid By Weight: Approximately 10 PCT, Aqua Pourable Gel, 7 - 8 pH, Solubility In Water: Infinite, Storage Temperature: 32 - 180 DEG F, Ul Listed, For Cable Pulling read less

IDEAL Aqua-Gel® II Non-toxic cable pulling lubricant in clear blue color is a polymer-based formula...150 read more

IDEAL Aqua-Gel® II Non-toxic cable pulling lubricant in clear blue color is a polymer-based formula that offers maximum tension reduction in high-stress electrical and communications cable-pulling operations. Lubricant dries to a semi-fluid film that won't clog conduit, and cleans up easily with soap/water. It remains temperature stable over a wide temperature range from 28°F to 180°F (-2°C to 88°C). Lubricant is convenient to apply by hand, brush or pump. It is well suited with all cable types except composite rubber, and clings to cable throughout long pulls. It comes in a 1-quart squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55-gallon drum. It is environmentally safe, non-toxic, non-flammable and non-corrosive for convenient use. For outdoor use only. read less

3M™ Wire Pulling Lubricant Wax WLX is a gray, wax based emulsion that has excellent lubricating properties for smooth, low tension wire and cable pulling. This wax wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction, which lessens the chance of cable jacket damage from high pulling forces.

3M™ Wire Pulling Lubricant Wax WLX is a gray, wax based emulsion that has excellent lubricating properties for smooth, low tension wire and cable pulling. This wax wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction, which lessens the chance of cable jacket damage from high pulling forces. read less

3M™ Wire Pulling Lubricant Wax WLX is a thick, consistent lubricant that does not liquefy or separat...150 read more

3M™ Wire Pulling Lubricant Wax WLX is a thick, consistent lubricant that does not liquefy or separate with hot aging. It scoops and applies easily to wire and cable without runs or drips in hot temperatures, and it will not evaporate too soon after pulls. The lubricant's low coefficient of friction lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the preferred choice for wet weather applications. read less

Yellow 77 Lubricant, Size: 5 GAL, Container: Bucket, Specific Gravity: 0.98, Plastic Safe: Yes, Slight Perfume Odor, Voc: 2.7 GPL (As Packaged, Minus Water), Working Temperature: 40 - 100 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Less Than 90 PCT, Percent Solid By Weight: Approximately 20 PCT, Yellow Paste, 7 - 8.5 pH, Solubility In Water: Moderate, Storage Temperature: 32 - 130 DEG F, Ul Listed, For Wire Pulling

Yellow 77 Lubricant, Size: 5 GAL, Container: Bucket, Specific Gravity: 0.98, Plastic Safe: Yes, Slight Perfume Odor, Voc: 2.7 GPL (As Packaged, Minus Water), Working Temperature: 40 - 100 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Less Than 90 PCT, Percent Solid By Weight: Approximately 20 PCT, Yellow Paste, 7 - 8.5 pH, Solubility In Water: Moderate, Storage Temperature: 32 - 130 DEG F, Ul Listed, For Wire Pulling read less

IDEAL Yellow 77® Wire pulling lubricant is a wax-based formula, and is the perfect general purpose l...150 read more

IDEAL Yellow 77® Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32°F to 130°F (0°C to 54°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed. read less

Hydraulic Oil 1 Quart. Specially compounded for use with Greenlee hydraulic equipment. Refinery-filtered to give you the finest oil available.

Hydraulic Oil 1 Quart. Specially compounded for use with Greenlee hydraulic equipment. Refinery-filtered to give you the finest oil available. read less

150

read less

ClearGlide Lubricant, Size: 1 GAL, Container: Pail, Specific Gravity: 1.09, Plastic Safe: Yes, Slight Odor, Voc: 17.4 GPL (As Packaged, Minus Water), Working Temperature: 40 - 100 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Less Than 98 PCT, Percent Solid By Weight: Approximately 5 PCT, Clear, Colorless Gel, 7 - 8 pH, Solubility In Water: Infinite, Storage Temperature: 32 - 180 DEG F, Ul Listed, For Wire Pulling

ClearGlide Lubricant, Size: 1 GAL, Container: Pail, Specific Gravity: 1.09, Plastic Safe: Yes, Slight Odor, Voc: 17.4 GPL (As Packaged, Minus Water), Working Temperature: 40 - 100 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Less Than 98 PCT, Percent Solid By Weight: Approximately 5 PCT, Clear, Colorless Gel, 7 - 8 pH, Solubility In Water: Infinite, Storage Temperature: 32 - 180 DEG F, Ul Listed, For Wire Pulling read less

IDEAL ClearGlide™ Wire pulling lubricant is a polymer-based formula well suited for all electrical a...150 read more

IDEAL ClearGlide™ Wire pulling lubricant is a polymer-based formula well suited for all electrical and datacom applications, and safe to use with all cable types. It is clear and colorless, and suitable for indoor as well as outdoor applications. This formula provides quick and easy clean up, and extraordinary lubricity for super-fast pulls. Its controlled evaporation rate is ideal for shorter runs. It remains stable over wide temperature ranges from 32°F to 180°F (0°C to 82°C) and dries to a semi-fluid film that won't clog conduit. It is convenient to apply by hand, brush, or pump, and is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. It comes in 1-qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed. read less