Products
$339.50 / EA
manufacturer discounts
learn about discounts
- $315.25 for $200.00+
- $303.13 for $500.00+
- $291.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
120/277V dual voltage phase control input 3-wire fluorescent output power module, White finish only
120/277V dual voltage phase control input 3-wire fluorescent output power module, White finish only
150
- Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim fluorescent lights that have Lutron Hi-lume and Eco-10 (Eco Series) line-voltage control electronic dimming ballasts.
- Utilizes Softswitch arcless switching technology.
- Up to 3 power modules may be wired on a single GRAFIK Eye zone.
- Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim fluorescent lights that have Lutron Hi-lume and Eco-10 (Eco Series) line-voltage control electronic dimming ballasts.
- Utilizes Softswitch arcless switching technology.
- Up to 3 power modules may be wired on a single GRAFIK Eye zone.
- UPC
- 027557533898
- UNSPSC
- 39121009
- Country of Origin
- US
- Type:
- 3-wire fluorescent power module
- Cooling:
- Air
- Enclosure:
- Plastic
- Environmental Conditions:
- 0 to 40 degrees Celsius. Relative humidity less than 90% non-condensing. Indoor use only.
- Frequency Rating:
- 50-60 Hz
- Height:
- 5.1 in
- Input Voltage:
- 120 VAC
- Insulation:
- Plastic
- Length:
- NaN in
- Mounting:
- Surface or recess
- Output Voltage:
- 120 to 277 VAC
- Sub Brand:
- GRAFIK Eye
- Type:
- 3-wire fluorescent power module
- Width:
- 6.3 in
120/277V dual voltage phase control input 3-wire fluorescent output power module, White finish only
manufacturer discounts
learn about discounts
- $315.25 for $200.00+
- $303.13 for $500.00+
- $291.00 for $1,000.00+
$339.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$206.50 / EA
manufacturer discounts
learn about discounts
- $191.75 for $200.00+
- $184.38 for $500.00+
- $177.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
120V phase control input 3-wire fluorescent output power module, White finish only
120V phase control input 3-wire fluorescent output power module, White finish only
150
- Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim fluorescent lights that have Lutron Hi-lume and Eco-10 (Eco Series) line-voltage control electronic dimming ballasts.
- Utilizes Softswitch arcless switching technology.
- Up to 3 power modules may be wired on a single GRAFIK Eye zone.
- Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim fluorescent lights that have Lutron Hi-lume and Eco-10 (Eco Series) line-voltage control electronic dimming ballasts.
- Utilizes Softswitch arcless switching technology.
- Up to 3 power modules may be wired on a single GRAFIK Eye zone.
- UPC
- 027557533904
- UNSPSC
- 39121009
- Country of Origin
- US
- Type:
- 3-wire fluorescent power module
- Cooling:
- Air
- Enclosure:
- Plastic
- Environmental Conditions:
- 0 to 40 degrees Celsius. Relative humidity less than 90% non-condensing. Indoor use only.
- Frequency Rating:
- 50-60 Hz
- Height:
- 5.1 in
- Input Voltage:
- 120 VAC
- Insulation:
- Plastic
- Length:
- NaN in
- Mounting:
- Surface or recess
- Output Voltage:
- 120 VAC
- Sub Brand:
- GRAFIK Eye
- Type:
- 3-wire fluorescent power module
- Width:
- 6.3 in
120V phase control input 3-wire fluorescent output power module, White finish only
manufacturer discounts
learn about discounts
- $191.75 for $200.00+
- $184.38 for $500.00+
- $177.00 for $1,000.00+
$206.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$196.00 / EA
manufacturer discounts
learn about discounts
- $182.00 for $200.00+
- $175.00 for $500.00+
- $168.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
120/277V dual voltage phase control input switched output power module, White finish only
120/277V dual voltage phase control input switched output power module, White finish only
150
- Provides capability for a zone on a GRAFIK Eye control unit (or other product) to switch a fully loaded circuit of lighting.
- May be used to switch incandescent, electronic lowvoltage, magnetic low-voltage, HID, fluorescent ballasts, and neon / cold cathode lighting sources.
- Utilizes Softswitch arcless switching technology.
- Provides power and switching for one zone.
- Up to 3 power modules may be wired on a single GRAFIK Eye zone.
- Provides capability for a zone on a GRAFIK Eye control unit (or other product) to switch a fully loaded circuit of lighting.
- May be used to switch incandescent, electronic lowvoltage, magnetic low-voltage, HID, fluorescent ballasts, and neon / cold cathode lighting sources.
- Utilizes Softswitch arcless switching technology.
- Provides power and switching for one zone.
- Up to 3 power modules may be wired on a single GRAFIK Eye zone.
- UPC
- 027557533911
- UNSPSC
- 39121009
- Country of Origin
- US
- Type:
- Power Module, switching
- Cooling:
- Air
- Enclosure:
- Plastic
- Environmental Conditions:
- 0 to 40 degrees Celsius. Relative humidity less than 90% non-condensing. Indoor use only.
- Frequency Rating:
- 50-60 Hz
- Height:
- 5.1 in
- Input Voltage:
- 120 VAC
- Insulation:
- Plastic
- Length:
- NaN in
- Mounting:
- Surface or recess
- Output Voltage:
- 120 to 277 VAC
- Standard:
- UL, CSA, NOM
- Type:
- Power Module, switching
- Width:
- 6.3 in
120/277V dual voltage phase control input switched output power module, White finish only
manufacturer discounts
learn about discounts
- $182.00 for $200.00+
- $175.00 for $500.00+
- $168.00 for $1,000.00+
$196.00 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$490.00 / EA
manufacturer discounts
learn about discounts
- $455.00 for $200.00+
- $437.50 for $500.00+
- $420.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Phase-adaptive power module provides dimming control for 1 zone of a full 16 A lighting load. May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, and neon/cold cathode. Compatible with 2-wire fluorescent dimmer input.
Phase-adaptive power module provides dimming control for 1 zone of a full 16 A lighting load. May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, and neon/cold cathode. Compatible with 2-wire fluorescent dimmer input.
150
- Provides dimming control for 1 zone of a full 16A lighting load.
- May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode.
- Phase-adaptive technology automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
- Up to 3 power modules may be controlled by a single dimmer (C5-BMJ- will control only 1 module).
- 2-wire input
- Models available for control voltage of 120V only or 220 - 277V.
- Models available for load voltage of 120V only or 120 - 277V.
- Compatible with 220 / 240V, non-CE systems. Contact Lutron for specific system applications.
- Not for use with non-dim loads.
- Provides dimming control for 1 zone of a full 16A lighting load.
- May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode.
- Phase-adaptive technology automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
- Up to 3 power modules may be controlled by a single dimmer (C5-BMJ- will control only 1 module).
- 2-wire input
- Models available for control voltage of 120V only or 220 - 277V.
- Models available for load voltage of 120V only or 120 - 277V.
- Compatible with 220 / 240V, non-CE systems. Contact Lutron for specific system applications.
- Not for use with non-dim loads.
- UPC
- 784276092586
- UNSPSC
- 39121009
- Country of Origin
- US
- Type:
- Power Module, phase-adaptive
- Enclosure:
- Plastic
- Frequency Rating:
- 50/60 Hz
- Input Voltage:
- 220-277 VAC
- Insulation:
- Plastic
- Mounting:
- Surface or recess
- Output Voltage:
- 120 to 277 VAC
- Standard:
- UL, RoHS
- Type:
- Power Module, phase-adaptive
Phase-adaptive power module provides dimming control for 1 zone of a full 16 A lighting load. May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, and neon/cold cath...
manufacturer discounts
learn about discounts
- $455.00 for $200.00+
- $437.50 for $500.00+
- $420.00 for $1,000.00+
$490.00 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$112.00 / EA
manufacturer discounts
learn about discounts
- $104.00 for $200.00+
- $100.00 for $500.00+
- $96.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Synthetic minimum load interface
Synthetic minimum load interface
150
- Provides capability for certain Lutron dimmers to control low-wattage loads from 0 watts up to the dimmer's minimum rating
- Presents a simulated load to the dimmer to meet the minimum load requirements even when the actual load is smaller.
- Works with forward phase or leading edge dimmers and reverse phase or trailing edge dimmers.
- Models available for 120V and 220-240V input power.
- This load-side equipment installs on the zone wiring in parallel with the lighting load.
- Dissapates a maximum of 10 watts when the controlling dimmer is near high-end.
- Provides capability for certain Lutron dimmers to control low-wattage loads from 0 watts up to the dimmer's minimum rating
- Presents a simulated load to the dimmer to meet the minimum load requirements even when the actual load is smaller.
- Works with forward phase or leading edge dimmers and reverse phase or trailing edge dimmers.
- Models available for 120V and 220-240V input power.
- This load-side equipment installs on the zone wiring in parallel with the lighting load.
- Dissapates a maximum of 10 watts when the controlling dimmer is near high-end.
- UPC
- 027557257978
- UNSPSC
- 39121009
- Country of Origin
- US
- Type:
- Synthetic minimum load interface
- Enclosure:
- Plastic
- Environmental Conditions:
- 0 to 40 degrees Celsius. 0 to 90% humidity, non-condensing
- Height:
- 4.56 in
- Input Voltage:
- 120 VAC
- Insulation:
- Plastic
- Length:
- NaN in
- Mounting:
- Surface or recess
- Output Voltage:
- 120 VAC
- Standard:
- UL, CSA
- Sub Brand:
- GRAFIK Eye
- Type:
- Synthetic minimum load interface
- Width:
- 2.55 in
Synthetic minimum load interface
manufacturer discounts
learn about discounts
- $104.00 for $200.00+
- $100.00 for $500.00+
- $96.00 for $1,000.00+
$112.00 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$248.50 / EA
manufacturer discounts
learn about discounts
- $230.75 for $200.00+
- $221.88 for $500.00+
- $213.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
120V phase control input phase-adaptive output power module, White finish only
120V phase control input phase-adaptive output power module, White finish only
150
- Provides dimming control for 1 zone of a full 16A lighting load.
- May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode.
- Phase-adaptive technology automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
- Up to 3 power modules may be controlled by a single dimmer (C5-BMJ- will control only 1 module).
- 2-wire input
- Models available for control voltage of 120V only or 220 - 277V.
- Models available for load voltage of 120V only or 120 - 277V.
- Compatible with 220 / 240V, non-CE systems. Contact Lutron for specific system applications.
- Not for use with non-dim loads.
- Provides dimming control for 1 zone of a full 16A lighting load.
- May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode.
- Phase-adaptive technology automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
- Up to 3 power modules may be controlled by a single dimmer (C5-BMJ- will control only 1 module).
- 2-wire input
- Models available for control voltage of 120V only or 220 - 277V.
- Models available for load voltage of 120V only or 120 - 277V.
- Compatible with 220 / 240V, non-CE systems. Contact Lutron for specific system applications.
- Not for use with non-dim loads.
- UPC
- 027557533881
- UNSPSC
- 39121009
- Country of Origin
- US
- Type:
- Power Module, phase-adaptive
- Cooling:
- Air
- Enclosure:
- Plastic
- Environmental Conditions:
- 0 to 40 degrees Celsius. Relative humidity less than 90% non-condensing. Indoor use only.
- Frequency Rating:
- 50-60 Hz
- Height:
- 5.1 in
- Input Voltage:
- 120 VAC
- Insulation:
- Plastic
- Length:
- NaN in
- Mounting:
- Surface or recess
- Output Voltage:
- 120 VAC
- Standard:
- UL, RoHS, CSA, NOM, CIDET
- Type:
- Power Module, phase-adaptive
- Width:
- 6.3 in
120V phase control input phase-adaptive output power module, White finish only
manufacturer discounts
learn about discounts
- $230.75 for $200.00+
- $221.88 for $500.00+
- $213.00 for $1,000.00+
$248.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$304.50 / EA
manufacturer discounts
learn about discounts
- $282.75 for $200.00+
- $271.88 for $500.00+
- $261.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
EcoSystem Switching Power Module for Non-Dim Loads
EcoSystem Switching Power Module for Non-Dim Loads
150
- Capable of switching 16A of high in-rush lighting load (LED, magnetic fluorescent ballast, electronic fluorescent ballast, incandescent, magnetic low voltage, electronic low-voltage, neon / cold cathode and motor loads)
- Provides 20V power for and responds to one occupant sensor, one EcoSystem daylight sensor, and one EcoSystem personal control input (infrared receiver or wallstation)
- Communicates status and sensor levels over the EcoSystem Bus
- Universal voltage input: 100 to 277V, 50/60Hz
- Non-volatile (EEPROM) memory stores specific system information for 10 years from power down to power restored
- Capable of switching 16A of high in-rush lighting load (LED, magnetic fluorescent ballast, electronic fluorescent ballast, incandescent, magnetic low voltage, electronic low-voltage, neon / cold cathode and motor loads)
- Provides 20V power for and responds to one occupant sensor, one EcoSystem daylight sensor, and one EcoSystem personal control input (infrared receiver or wallstation)
- Communicates status and sensor levels over the EcoSystem Bus
- Universal voltage input: 100 to 277V, 50/60Hz
- Non-volatile (EEPROM) memory stores specific system information for 10 years from power down to power restored
- UPC
- 027557258593
- UNSPSC
- 39121009
- Country of Origin
- US
- Type:
- Switching Power Module
- Input Voltage:
- 100 to 277 V
- Sub Brand:
- EcoSystem
- Type:
- Switching Power Module
EcoSystem Switching Power Module for Non-Dim Loads
manufacturer discounts
learn about discounts
- $282.75 for $200.00+
- $271.88 for $500.00+
- $261.00 for $1,000.00+
$304.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$255.50 / EA
manufacturer discounts
learn about discounts
- $237.25 for $200.00+
- $228.13 for $500.00+
- $219.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Phase adaptive power module with 3-wire fluorescent input, 120V
Phase adaptive power module with 3-wire fluorescent input, 120V
150
- Provides dimming control for 1 zone of a full 16A lighting load.
- May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode.
- Phase-adaptive technology automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
- Up to 3 power modules may be controlled by a single dimmer (C5-BMJ- will control only 1 module).
- 3-wire fluorescent dimmer input
- Can be used in conjunction with BCI-0-10 for 0 - 10 V dimming applications. For more information, see Application Note #516 (Lutron P/N 048516) at www.lutron.com
- Models available for control voltage of 120V only or 220 - 277V.
- Models available for load voltage of 120V only or 120 - 277V.
- Compatible with 220 / 240V, non-CE systems. Contact Lutron for specific system applications.
- Not for use with non-dim loads.
- Provides dimming control for 1 zone of a full 16A lighting load.
- May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode.
- Phase-adaptive technology automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
- Up to 3 power modules may be controlled by a single dimmer (C5-BMJ- will control only 1 module).
- 3-wire fluorescent dimmer input
- Can be used in conjunction with BCI-0-10 for 0 - 10 V dimming applications. For more information, see Application Note #516 (Lutron P/N 048516) at www.lutron.com
- Models available for control voltage of 120V only or 220 - 277V.
- Models available for load voltage of 120V only or 120 - 277V.
- Compatible with 220 / 240V, non-CE systems. Contact Lutron for specific system applications.
- Not for use with non-dim loads.
- UPC
- 027557624763
- UNSPSC
- 39121009
- Country of Origin
- US
- Type:
- Power Module, phase-adaptive, with 3-wire fluorescent input
- Cooling:
- Air
- Enclosure:
- Plastic
- Environmental Conditions:
- 0 to 40 degrees Celsius. Relative humidity less than 90% non-condensing. Indoor use only.
- Frequency Rating:
- 50-60 Hz
- Height:
- 5.1 in
- Input Voltage:
- 120 VAC
- Insulation:
- Plastic
- Length:
- NaN in
- Mounting:
- Surface or recess
- Output Voltage:
- 120 VAC
- Standard:
- UL, RoHS, CSA, NOM, CIDET
- Type:
- Power Module, phase-adaptive, with 3-wire fluorescent input
- Width:
- 6.3 in
Phase adaptive power module with 3-wire fluorescent input, 120V
manufacturer discounts
learn about discounts
- $237.25 for $200.00+
- $228.13 for $500.00+
- $219.00 for $1,000.00+
$255.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders