Products
$12.26 / EA
manufacturer discounts
learn about discounts
- $11.44 for $300.00+
- $10.90 for $500.00+
- $10.44 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Medium-Wall Heat Shrink, Thickness: 091 IN, Length: 4 (End Cap) IN, Volume Resistivity: 1014 OHM.CM For IEC 93, Dielectric Strength: Less Than 15 KV/MM IEC 243, Continuous Operating Temperature: -55 DEG CC To 110 DEG C IEC 216, Cable Range: 2/0 AWG - 500 MCM, Nominal Recoveredi.d. (max.): 0.310 IN, Expanded I.d. (min.): 0.980, Elongation At Break: ASTM D 638, Less Than 400%, Elongation Of Break After Aging: Less Than 300 PCT 150 DEG C, 168 HR
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Medium-Wall Heat Shrink, Thickness: 091 IN, Length: 4 (End Cap) IN, Volume Resistivity: 1014 OHM.CM For IEC 93, Dielectric Strength: Less Than 15 KV/MM IEC 243, Continuous Operating Temperature: -55 DEG CC To 110 DEG C IEC 216, Cable Range: 2/0 AWG - 500 MCM, Nominal Recoveredi.d. (max.): 0.310 IN, Expanded I.d. (min.): 0.980, Elongation At Break: ASTM D 638, Less Than 400%, Elongation Of Break After Aging: Less Than 300 PCT 150 DEG C, 168 HR
Creates a watertight seal to protect ends of power and control cordsProtects against oxidation, ozon...150
Creates a watertight seal to protect ends of power and control cordsProtects against oxidation, ozone, UV?radiation, etc.Coated with hot melt adhesive to ensure environment sealFits easily over end of cableProtect power cables up to 1000V and telecommunication cableRecommended for both open air and underground power distribution cables with PVC, lead or XLPE sheathsThermally stabilized cross-linked polylefin, coated with specially designed hot melt adhesiveUV resistant
- Creates a watertight seal to protect ends of power and control cords
- Protects against oxidation, ozone, UV radiation, etc
- Coated with hot melt adhesive to ensure environment seal
- Fits easily over end of cable
- Protect power cables up to 1000V and telecommunication cable
- Recommended for both open air and underground power distribution cables with PVC, lead or XLPE sheaths
- Thermally stabilized cross-linked polylefin, coated with specially designed hot melt adhesive
- UV resistant
- Creates a watertight seal to protect ends of power and control cords
- Protects against oxidation, ozone, UV radiation, etc
- Coated with hot melt adhesive to ensure environment seal
- Fits easily over end of cable
- Protect power cables up to 1000V and telecommunication cable
- Recommended for both open air and underground power distribution cables with PVC, lead or XLPE sheaths
- Thermally stabilized cross-linked polylefin, coated with specially designed hot melt adhesive
- UV resistant
- UPC
- 783250463824
- UNSPSC
- 39121723
- Country of Origin
- USA
- Type:
- Medium-Wall Heat Shrink
- Continuous Operating Temperature:
- -55 DEG CC To 110 DEG C IEC 216
- Dielectric Strength:
- Less Than 15 KV/MM IEC 243
- Length:
- 4 in
- Standard:
- RoHS
- Sub Brand:
- Thermo-Shrink®
- Thickness:
- 091 IN
- Type:
- Medium-Wall Heat Shrink
- Volume Resistivity:
- 1014 OHM.CM For IEC 93
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Medium-Wall Heat Shrink, Thickness: 091 IN, Length: 4 (End Cap) IN, Volume Resistivity: 1014 OHM.CM For IEC 93, Dielectric Strength: Less Than 15 KV/MM IEC...
manufacturer discounts
learn about discounts
- $11.44 for $300.00+
- $10.90 for $500.00+
- $10.44 for $1,000.00+
$12.26 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$17.28 / EA
manufacturer discounts
learn about discounts
- $16.13 for $300.00+
- $15.36 for $500.00+
- $14.72 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 1/8 IN, Thickness: 017 IN, Length: 4 FT, Dielectric Strength: ASTM D 150, 20 KV/MM, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 24 - 20 AWG, Nominal Recoveredi.d. (max.): 063 IN, Expanded I.d. (min.): 0.146, Elongation At Break: 600 PCT AS...
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 1/8 IN, Thickness: 017 IN, Length: 4 FT, Dielectric Strength: ASTM D 150, 20 KV/MM, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 24 - 20 AWG, Nominal Recoveredi.d. (max.): 063 IN, Expanded I.d. (min.): 0.146, Elongation At Break: 600 PCT ASTM D 638, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Cold Bend Test (-55°c/4 Hours): No Cracking For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 1/8 IN, Package: Disk
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and...150
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilienceUse to bundle wires for very flexible light-duty harnessesHighly flame-retardant and flexible; resistant to common fluids and solventsMeets UL 486D 125°C VW-1 600V; Material: No PBB’s, PBBE’s, conforms to ROHS2:1 shrink ratio; Minimum shrink temperature: 70°C; Operating temperature: -55°C to +125°CRoHS compliantUV resistant
- Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
- Use to bundle wires for very flexible light-duty harnesses
- Highly flame-retardant and flexible; resistant to common fluids and solvents
- Meets UL 486D 125°C VW-1 600V; Material: No PBB’s, PBBE’s, conforms to ROHS2:1 shrink ratio; Minimum shrink temperature: 70°C; Operating temperature: -55°C to +125°CRoHS compliant
- UV resistant
- Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
- Use to bundle wires for very flexible light-duty harnesses
- Highly flame-retardant and flexible; resistant to common fluids and solvents
- Meets UL 486D 125°C VW-1 600V; Material: No PBB’s, PBBE’s, conforms to ROHS2:1 shrink ratio; Minimum shrink temperature: 70°C; Operating temperature: -55°C to +125°CRoHS compliant
- UV resistant
- UPC
- 783250466030
- UNSPSC
- 39121723
- Country of Origin
- CHN
- Type:
- Thin-Wall
- Continuous Operating Temperature:
- -55 To 125 DEG C
- Dielectric Strength:
- ASTM D 150, 20 KV/MM
- Heat Shock:
- UL 224, No Cracking (250 DEG C/4 HR)
- Inside Diameter:
- 1/8 IN
- Length:
- 4 ft
- Minimum Shrink Temperature:
- 70 DEG C
- Shrink Ratio:
- 2:1
- Standard:
- C/US RU Listed,RoHS
- Sub Brand:
- Thermo-Shrink®
- Thickness:
- 017 IN
- Type:
- Thin-Wall
- Volume Resistivity:
- 1014 OHM CM For ASTM D 876 Test Method
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 1/8 IN, Thickness: 017 IN, Length: 4 FT, Dielectric Strength: ASTM D 150, 20 KV/MM, Volume Resistivity: 1014...
manufacturer discounts
learn about discounts
- $16.13 for $300.00+
- $15.36 for $500.00+
- $14.72 for $1,000.00+
$17.28 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$35.86 / EA
manufacturer discounts
learn about discounts
- $33.47 for $300.00+
- $31.87 for $500.00+
- $30.54 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 48 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 D...
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 48 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 6 - 2 AWG, Nominal Recoveredi.d. (max.): 0.240 IN, Expanded I.d. (min.): 0.750, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-750
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides compl...150
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applicationsMaximum flame retardancyMeets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirementsRated for 600V, 90°C continuous use
- TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
- Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
- Maximum flame retardancy
- Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
- Rated for 600V, 90°C continuous use
- TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
- Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
- Maximum flame retardancy
- Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
- Rated for 600V, 90°C continuous use
- UPC
- 783250463503
- UNSPSC
- 39121723
- Country of Origin
- USA
- Type:
- Heavy-Wall Heat Shrink Tubing
- Continuous Operating Temperature:
- -55 To 110 DEG C
- Dielectric Strength:
- 500 V/MIL (20 KV MINT)
- Heat Aging:
- 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation)
- Heat Shock:
- No Cracks, Flowing Or Dripping (4 HR At 225 DEG C)
- Length:
- 48 in
- Low Temperature Flexibility:
- -55 DEG C
- Minimum Shrink Temperature:
- 120 - 250 DEG C (200 DEG C Recommended)
- Shrink Ratio:
- 3:1
- Standard:
- CSA, UL Listed,RoHS
- Sub Brand:
- Thermo-Shrink®
- Thickness:
- 090 IN
- Type:
- Heavy-Wall Heat Shrink Tubing
- Volume Resistivity:
- 1013 OHM -CM MIN
- Water Absorption:
- 0.5 PCT
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 48 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (2...
manufacturer discounts
learn about discounts
- $33.47 for $300.00+
- $31.87 for $500.00+
- $30.54 for $1,000.00+
$35.86 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$10.79 / EA
manufacturer discounts
learn about discounts
- $10.07 for $300.00+
- $9.59 for $500.00+
- $9.19 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.120 IN, Length: 9 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175...
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.120 IN, Length: 9 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 1 - 3/0 AWG, Nominal Recoveredi.d. (max.): 0.350 IN, Expanded I.d. (min.): 1.100, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-1100
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides compl...150
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applicationsMaximum flame retardancyMeets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirementsRated for 600V, 90°C continuous use
- TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
- Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
- Maximum flame retardancy
- Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
- Rated for 600V, 90°C continuous use
- TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
- Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
- Maximum flame retardancy
- Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
- Rated for 600V, 90°C continuous use
- UPC
- 783250463527
- UNSPSC
- 39121723
- Country of Origin
- USA
- Type:
- Heavy-Wall Heat Shrink Tubing
- Continuous Operating Temperature:
- -55 To 110 DEG C
- Dielectric Strength:
- 500 V/MIL (20 KV MINT)
- Heat Aging:
- 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation)
- Heat Shock:
- No Cracks, Flowing Or Dripping (4 HR At 225 DEG C)
- Length:
- 9 in
- Low Temperature Flexibility:
- -55 DEG C
- Minimum Shrink Temperature:
- 120 - 250 DEG C (200 DEG C Recommended)
- Shrink Ratio:
- 3:1
- Standard:
- CSA, UL Listed,RoHS
- Sub Brand:
- Thermo-Shrink®
- Thickness:
- 0.120 IN
- Type:
- Heavy-Wall Heat Shrink Tubing
- Volume Resistivity:
- 1013 OHM -CM MIN
- Water Absorption:
- 0.5 PCT
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.120 IN, Length: 9 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (...
manufacturer discounts
learn about discounts
- $10.07 for $300.00+
- $9.59 for $500.00+
- $9.19 for $1,000.00+
$10.79 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$10.79 / EA
manufacturer discounts
learn about discounts
- $10.07 for $300.00+
- $9.59 for $500.00+
- $9.19 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.120 IN, Length: 6 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175...
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.120 IN, Length: 6 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 4 - 3/0 AWG, Nominal Recoveredi.d. (max.): 0.350 IN, Expanded I.d. (min.): 1.100, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-1100
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides compl...150
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applicationsMaximum flame retardancyMeets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirementsRated for 600V, 90°C continuous use
- TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
- Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
- Maximum flame retardancy
- Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
- Rated for 600V, 90°C continuous use
- TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
- Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
- Maximum flame retardancy
- Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
- Rated for 600V, 90°C continuous use
- UPC
- 783250463510
- UNSPSC
- 39121723
- Country of Origin
- USA
- Type:
- Heavy-Wall Heat Shrink Tubing
- Continuous Operating Temperature:
- -55 To 110 DEG C
- Dielectric Strength:
- 500 V/MIL (20 KV MINT)
- Heat Aging:
- 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation)
- Heat Shock:
- No Cracks, Flowing Or Dripping (4 HR At 225 DEG C)
- Length:
- 6 in
- Low Temperature Flexibility:
- -55 DEG C
- Minimum Shrink Temperature:
- 120 - 250 DEG C (200 DEG C Recommended)
- Shrink Ratio:
- 3:1
- Standard:
- CSA, UL Listed,RoHS
- Sub Brand:
- Thermo-Shrink®
- Thickness:
- 0.120 IN
- Type:
- Heavy-Wall Heat Shrink Tubing
- Volume Resistivity:
- 1013 OHM -CM MIN
- Water Absorption:
- 0.5 PCT
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.120 IN, Length: 6 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (...
manufacturer discounts
learn about discounts
- $10.07 for $300.00+
- $9.59 for $500.00+
- $9.19 for $1,000.00+
$10.79 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$18.02 / EA
manufacturer discounts
learn about discounts
- $16.82 for $300.00+
- $16.02 for $500.00+
- $15.35 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.160 IN, Length: 12 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175...
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.160 IN, Length: 12 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 2/0 AWG - 350 MCM, Nominal Recoveredi.d. (max.): 0.470 IN, Expanded I.d. (min.): 1.500, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-1500
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides compl...150
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applicationsMaximum flame retardancyMeets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirementsRated for 600V, 90°C continuous use
- TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
- Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
- Maximum flame retardancy
- Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
- Rated for 600V, 90°C continuous use
- TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
- Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
- Maximum flame retardancy
- Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
- Rated for 600V, 90°C continuous use
- UPC
- 783250463572
- UNSPSC
- 39121723
- Country of Origin
- USA
- Type:
- Heavy-Wall Heat Shrink Tubing
- Continuous Operating Temperature:
- -55 To 110 DEG C
- Dielectric Strength:
- 500 V/MIL (20 KV MINT)
- Heat Aging:
- 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation)
- Heat Shock:
- No Cracks, Flowing Or Dripping (4 HR At 225 DEG C)
- Length:
- 12 in
- Low Temperature Flexibility:
- -55 DEG C
- Minimum Shrink Temperature:
- 120 - 250 DEG C (200 DEG C Recommended)
- Shrink Ratio:
- 3:1
- Standard:
- CSA, UL Listed,RoHS
- Sub Brand:
- Thermo-Shrink®
- Thickness:
- 0.160 IN
- Type:
- Heavy-Wall Heat Shrink Tubing
- Volume Resistivity:
- 1013 OHM -CM MIN
- Water Absorption:
- 0.5 PCT
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.160 IN, Length: 12 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL...
manufacturer discounts
learn about discounts
- $16.82 for $300.00+
- $16.02 for $500.00+
- $15.35 for $1,000.00+
$18.02 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$1.07 / EA
manufacturer discounts
learn about discounts
- $1.00 for $300.00+
- $0.96 for $500.00+
- $0.92 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Thin-Wall, Shrink Ratio: 2:1, Outside Diameter: 1/8 IN, Thickness: 017 IN, Length: 6 IN, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Dielectric Strength: 20 KV/MM For ASTM D 150 Test Method, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: No cracking For UL 224(250 DEG C /4 hours), Cable Range: 24 - 20 AWG, Nominal Recoveredi.d. (max.): 063 IN, Expanded I.d. (min.): 0.146, Elongatio...
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Thin-Wall, Shrink Ratio: 2:1, Outside Diameter: 1/8 IN, Thickness: 017 IN, Length: 6 IN, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Dielectric Strength: 20 KV/MM For ASTM D 150 Test Method, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: No cracking For UL 224(250 DEG C /4 hours), Cable Range: 24 - 20 AWG, Nominal Recoveredi.d. (max.): 063 IN, Expanded I.d. (min.): 0.146, Elongation At Break: 600 PCT For ASTM D 638 Test Method, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Cold Bend Test (-55°c/4 Hours): No Cracking For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 1/8 IN, Package: Bag
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and...150
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilienceUse to bundle wires for very flexible light-duty harnessesHighly flame-retardant and flexible; resistant to common fluids and solventsMeets UL 486D 125°C VW-1 600V; Material: No PBB’s, PBBE’s, conforms to ROHS2:1 shrink ratio; Minimum shrink temperature: 70°C; Operating temperature: -55°C to +125°CRoHS compliantUV resistant
- Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
- Use to bundle wires for very flexible light-duty harnesses
- Highly flame-retardant and flexible; resistant to common fluids and solvents
- Meets UL 486D 125°C VW-1 600V; Material: No PBB’s, PBBE’s, conforms to ROHS
- 2:1 shrink ratio; Minimum shrink temperature: 70°C; Operating temperature: -55°C to +125°C
- RoHS compliant
- UV resistant
- Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
- Use to bundle wires for very flexible light-duty harnesses
- Highly flame-retardant and flexible; resistant to common fluids and solvents
- Meets UL 486D 125°C VW-1 600V; Material: No PBB’s, PBBE’s, conforms to ROHS
- 2:1 shrink ratio; Minimum shrink temperature: 70°C; Operating temperature: -55°C to +125°C
- RoHS compliant
- UV resistant
- UPC
- 783250463107
- UNSPSC
- 39121723
- Country of Origin
- USA
- Type:
- Thin-Wall
- Continuous Operating Temperature:
- -55 To 125 DEG C
- Dielectric Strength:
- 20 KV/MM For ASTM D 150 Test Method
- Heat Shock:
- No cracking For UL 224(250 DEG C /4 hours)
- Length:
- 6 in
- Minimum Shrink Temperature:
- 70 DEG C
- Outside Diameter:
- 0.125 in
- Shrink Ratio:
- 2:1
- Standard:
- C/US RU Listed,RoHS
- Sub Brand:
- Thermo-Shrink®
- Thickness:
- 017 IN
- Type:
- Thin-Wall
- Volume Resistivity:
- 1014 OHM CM For ASTM D 876 Test Method
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Thin-Wall, Shrink Ratio: 2:1, Outside Diameter: 1/8 IN, Thickness: 017 IN, Length: 6 IN, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Dielec...
manufacturer discounts
learn about discounts
- $1.00 for $300.00+
- $0.96 for $500.00+
- $0.92 for $1,000.00+
$1.07 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$10.32 / EA
manufacturer discounts
learn about discounts
- $9.63 for $300.00+
- $9.17 for $500.00+
- $8.79 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 9 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DE...
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 9 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 6 - 2 AWG, Nominal Recoveredi.d. (max.): 0.240 IN, Expanded I.d. (min.): 0.750, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-750
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides compl...150
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applicationsMaximum flame retardancyMeets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirementsRated for 600V, 90°C continuous use
- TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
- Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
- Maximum flame retardancy
- Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
- Rated for 600V, 90°C continuous use
- TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
- Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
- Maximum flame retardancy
- Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
- Rated for 600V, 90°C continuous use
- UPC
- 783250463480
- UNSPSC
- 39121723
- Country of Origin
- USA
- Type:
- Heavy-Wall Heat Shrink Tubing
- Continuous Operating Temperature:
- -55 To 110 DEG C
- Dielectric Strength:
- 500 V/MIL (20 KV MINT)
- Heat Aging:
- 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation)
- Heat Shock:
- No Cracks, Flowing Or Dripping (4 HR At 225 DEG C)
- Length:
- 9 in
- Low Temperature Flexibility:
- -55 DEG C
- Minimum Shrink Temperature:
- 120 - 250 DEG C (200 DEG C Recommended)
- Shrink Ratio:
- 3:1
- Standard:
- CSA, UL Listed,RoHS
- Sub Brand:
- Thermo-Shrink®
- Thickness:
- 090 IN
- Type:
- Heavy-Wall Heat Shrink Tubing
- Volume Resistivity:
- 1013 OHM -CM MIN
- Water Absorption:
- 0.5 PCT
IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 9 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20...
manufacturer discounts
learn about discounts
- $9.63 for $300.00+
- $9.17 for $500.00+
- $8.79 for $1,000.00+
$10.32 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders