Products
$14.39 / EA
manufacturer discounts
learn about discounts
- $12.90 for $1,300.00+
- $12.20 for $2,000.00+
- $11.71 for $3,000.00+
Local stock: 0
Lead time:
1
-
2
working days
Telescoping Strut Replacement, 1/4" Rod
Telescoping Strut Replacement, 1/4" Rod
150
- Captive threaded nuts enable fastening to threaded rod supports without loose parts
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18� (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
- Captive threaded nuts enable fastening to threaded rod supports without loose parts
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18� (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
- UPC
- 782856916444
- UNSPSC
- 30101804
- Country of Origin
- US
- Material:
- Steel
- Type:
- Telescoping Support Brackets
- Depth:
- 1 3/8"
- Finish:
- Galvanized
- Gauge:
- 0.04 in
- Length:
- 21.5 in
- Material:
- Steel
- Rod Size (Imperial):
- 1/4 in
- Slot Size:
- 7/8 in
- Sub Brand:
- CADDY
- Type:
- Telescoping Support Brackets
- Width:
- 1.625 in
Telescoping Strut Replacement, 1/4" Rod
manufacturer discounts
learn about discounts
- $12.90 for $1,300.00+
- $12.20 for $2,000.00+
- $11.71 for $3,000.00+
$14.39 / EA
Local stock: 0
Lead time:
1
-
2
working days
$1.03 / EA
manufacturer discounts
learn about discounts
- $0.92 for $1,300.00+
- $0.87 for $2,000.00+
- $0.84 for $3,000.00+
Local stock: 0
Lead time:
1
-
2
working days
ADK Strut End Cap, Green
ADK Strut End Cap, Green
150
- Fits into ERISTRUT Type A channel
- When separated, provides two end caps for ERISTRUT Type C channel
- Fits into ERISTRUT Type A channel
- When separated, provides two end caps for ERISTRUT Type C channel
- UPC
- 782856792024
- UNSPSC
- 30101804
- Country of Origin
- NL
- Material:
- Polyethylene
- Type:
- Strut End Caps and Covers
- Height (Imperial) <Nom>:
- 1 5/8 in
- Material:
- Polyethylene
- Sub Brand:
- CADDY
- Type:
- Strut End Caps and Covers
- Width (Imperial) <Nom>:
- 1 5/8 in
ADK Strut End Cap, Green
manufacturer discounts
learn about discounts
- $0.92 for $1,300.00+
- $0.87 for $2,000.00+
- $0.84 for $3,000.00+
$1.03 / EA
Local stock: 0
Lead time:
1
-
2
working days
$1.18 / EA
manufacturer discounts
learn about discounts
- $1.06 for $1,300.00+
- $1.00 for $2,000.00+
- $0.96 for $3,000.00+
Local stock: 0
Lead time:
1
-
2
working days
ADK Strut End Cap, Gray
ADK Strut End Cap, Gray
150
- Fits into ERISTRUT Type A channel
- When separated, provides two end caps for ERISTRUT Type C channel
- Fits into ERISTRUT Type A channel
- When separated, provides two end caps for ERISTRUT Type C channel
- UPC
- 782856792062
- UNSPSC
- 30101804
- Country of Origin
- NL
- Material:
- Polyethylene
- Type:
- Strut End Caps and Covers
- Height (Imperial) <Nom>:
- 1 5/8 in
- Material:
- Polyethylene
- Sub Brand:
- CADDY
- Type:
- Strut End Caps and Covers
- Width (Imperial) <Nom>:
- 1 5/8 in
ADK Strut End Cap, Gray
manufacturer discounts
learn about discounts
- $1.06 for $1,300.00+
- $1.00 for $2,000.00+
- $0.96 for $3,000.00+
$1.18 / EA
Local stock: 0
Lead time:
1
-
2
working days
$1.21 / EA
manufacturer discounts
learn about discounts
- $1.08 for $1,300.00+
- $1.02 for $2,000.00+
- $0.98 for $3,000.00+
Local stock: 0
Lead time:
1
-
2
working days
ADK Strut End Cap, Red
ADK Strut End Cap, Red
150
- Fits into ERISTRUT Type A channel
- When separated, provides two end caps for ERISTRUT Type C channel
- Fits into ERISTRUT Type A channel
- When separated, provides two end caps for ERISTRUT Type C channel
- UPC
- 782856792031
- UNSPSC
- 30101804
- Country of Origin
- NL
- Material:
- Polyethylene
- Type:
- Strut End Caps and Covers
- Height (Imperial) <Nom>:
- 1 5/8 in
- Material:
- Polyethylene
- Standard:
- None
- Sub Brand:
- CADDY
- Type:
- Strut End Caps and Covers
- Width (Imperial) <Nom>:
- 1 5/8 in
ADK Strut End Cap, Red
manufacturer discounts
learn about discounts
- $1.08 for $1,300.00+
- $1.02 for $2,000.00+
- $0.98 for $3,000.00+
$1.21 / EA
Local stock: 0
Lead time:
1
-
2
working days
$12.13 / EA
manufacturer discounts
learn about discounts
- $10.87 for $1,300.00+
- $10.29 for $2,000.00+
- $9.87 for $3,000.00+
Local stock: 0
Lead time:
1
-
2
working days
Telescoping Strut Replacement, No Nut
Telescoping Strut Replacement, No Nut
150
- Can be attached directly to a wall for wall-mounted applications?
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18� (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
- Can be attached directly to a wall for wall-mounted applications?
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18� (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
- UPC
- 782856916451
- UNSPSC
- 30101804
- Country of Origin
- US
- Material:
- Steel
- Type:
- Telescoping Support Brackets
- Depth:
- 1 3/8"
- Finish:
- Galvanized
- Gauge:
- 0.04 in
- Length:
- 21.5 in
- Material:
- Steel
- Slot Size:
- 7/8 in
- Sub Brand:
- CADDY
- Type:
- Telescoping Support Brackets
- Width:
- 1.625 in
Telescoping Strut Replacement, No Nut
manufacturer discounts
learn about discounts
- $10.87 for $1,300.00+
- $10.29 for $2,000.00+
- $9.87 for $3,000.00+
$12.13 / EA
Local stock: 0
Lead time:
1
-
2
working days
$11.64 / EA
manufacturer discounts
learn about discounts
- $10.44 for $1,300.00+
- $9.87 for $2,000.00+
- $9.47 for $3,000.00+
Local stock: 0
Lead time:
1
-
2
working days
Telescoping Strut Replacement, Retrofit, 3/8" Rod
Telescoping Strut Replacement, Retrofit, 3/8" Rod
150
- Slotted ends allow the bracket to be installed with four nVent CADDY SN Nuts on threaded rod above an existing trapeze, saving contractor time and limiting building downtime?
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18� (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
- Slotted ends allow the bracket to be installed with four nVent CADDY SN Nuts on threaded rod above an existing trapeze, saving contractor time and limiting building downtime?
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18� (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
- UPC
- 782856916468
- UNSPSC
- 30101804
- Country of Origin
- US
- Material:
- Steel
- Type:
- Telescoping Support Brackets
- Depth:
- 1 3/8"
- Finish:
- Galvanized
- Gauge:
- 0.04 in
- Length:
- 21.5 in
- Material:
- Steel
- Rod Size (Imperial):
- 3/8 in
- Slot Size:
- 7/8 in
- Sub Brand:
- CADDY
- Type:
- Telescoping Support Brackets
- Width:
- 1.625 in
Telescoping Strut Replacement, Retrofit, 3/8" Rod
manufacturer discounts
learn about discounts
- $10.44 for $1,300.00+
- $9.87 for $2,000.00+
- $9.47 for $3,000.00+
$11.64 / EA
Local stock: 0
Lead time:
1
-
2
working days
$14.39 / EA
manufacturer discounts
learn about discounts
- $12.90 for $1,300.00+
- $12.20 for $2,000.00+
- $11.71 for $3,000.00+
Local stock: 0
Lead time:
1
-
2
working days
Telescoping Strut Replacement, 3/8" Rod
Telescoping Strut Replacement, 3/8" Rod
150
- Captive threaded nuts enable fastening to threaded rod supports without loose parts
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18� (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
- Captive threaded nuts enable fastening to threaded rod supports without loose parts
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18� (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
- UPC
- 782856916437
- UNSPSC
- 30101804
- Country of Origin
- US
- Material:
- Steel
- Type:
- Telescoping Support Brackets
- Depth:
- 1 3/8"
- Finish:
- Galvanized
- Gauge:
- 0.04 in
- Length:
- 21.5 in
- Material:
- Steel
- Rod Size (Imperial):
- 3/8 in
- Slot Size:
- 7/8 in
- Sub Brand:
- CADDY
- Type:
- Telescoping Support Brackets
- Width:
- 1.625 in
Telescoping Strut Replacement, 3/8" Rod
manufacturer discounts
learn about discounts
- $12.90 for $1,300.00+
- $12.20 for $2,000.00+
- $11.71 for $3,000.00+
$14.39 / EA
Local stock: 0
Lead time:
1
-
2
working days
$1.18 / EA
manufacturer discounts
learn about discounts
- $1.06 for $1,300.00+
- $1.00 for $2,000.00+
- $0.96 for $3,000.00+
Local stock: 0
Lead time:
1
-
2
working days
Strut End Cap, Blue
Strut End Cap, Blue
150
- Fits into ERISTRUT Type A channel
- When separated, provides two end caps for ERISTRUT Type C channel
- Fits into ERISTRUT Type A channel
- When separated, provides two end caps for ERISTRUT Type C channel
- UPC
- 782856809999
- UNSPSC
- 30101804
- Country of Origin
- NL
- Material:
- Polyethylene
- Type:
- Strut End Caps and Covers
- Height (Imperial) <Nom>:
- 1 5/8 in
- Material:
- Polyethylene
- Standard:
- None
- Sub Brand:
- CADDY
- Type:
- Strut End Caps and Covers
- Width (Imperial) <Nom>:
- 1 5/8 in
Strut End Cap, Blue
manufacturer discounts
learn about discounts
- $1.06 for $1,300.00+
- $1.00 for $2,000.00+
- $0.96 for $3,000.00+
$1.18 / EA
Local stock: 0
Lead time:
1
-
2
working days