Products
$49.74 / EA
manufacturer discounts
learn about discounts
- $44.60 for $1,300.00+
- $42.20 for $2,000.00+
- $40.48 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
633 Pipe Saddle for 2 1/2" Insulation, 4"�5" Pipe
633 Pipe Saddle for 2 1/2" Insulation, 4"�5" Pipe
150
- Designed for high temperature service or where heat losses are to be kept at a minimum and to protect insulation against damage at the point of support
- Conforms with Federal Specification WW-H-171 (Type 40A or 40B), Manufacturers Standardization Society ANSI�/MSS-SP-58 (Type 39)
- Designed for high temperature service or where heat losses are to be kept at a minimum and to protect insulation against damage at the point of support
- Conforms with Federal Specification WW-H-171 (Type 40A or 40B), Manufacturers Standardization Society ANSI�/MSS-SP-58 (Type 39)
- UPC
- 782856371236
- UNSPSC
- 40141725
- Country of Origin
- US
- Material:
- Steel
- Type:
- Pipe Saddles
- Finish:
- Plain
- Length (imperial) <Nom>:
- 12 in
- Material:
- Steel
- Sub Brand:
- CADDY
- Type:
- Pipe Saddles
633 Pipe Saddle for 2 1/2" Insulation, 4"�5" Pipe
manufacturer discounts
learn about discounts
- $44.60 for $1,300.00+
- $42.20 for $2,000.00+
- $40.48 for $3,000.00+
$49.74 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$17.62 / EA
manufacturer discounts
learn about discounts
- $15.80 for $1,300.00+
- $14.95 for $2,000.00+
- $14.34 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
455 Malleable Split Ring Hanger, EG, 2 1/2" Pipe, 2.875" OD, 1/2" Rod
455 Malleable Split Ring Hanger, EG, 2 1/2" Pipe, 2.875" OD, 1/2" Rod
150
- Recommended for the suspension of stationary non-insulated pipe lines
- Allows for piping runs close to ceiling or walls
- Conforms with Federal Specification WW-H-171 (Type 25), Manufacturers Standardization Society (MSS) SP-58 (Type 12)
- Recommended for the suspension of stationary non-insulated pipe lines
- Allows for piping runs close to ceiling or walls
- Conforms with Federal Specification WW-H-171 (Type 25), Manufacturers Standardization Society (MSS) SP-58 (Type 12)
- UPC
- 782856368755
- UNSPSC
- 40141725
- Country of Origin
- CN
- Material:
- Cast Iron
- Type:
- Malleable Split Ring Hangers
- Finish:
- Electrogalvanized
- Material:
- Cast Iron
- Outer Diameter (Imperial) <Nom>:
- 2 7/8 in
- Pipe Size <Nom>:
- 2 1/2 in
- Rod Size (Imperial):
- 1/2 in
- Standard:
- None
- Static Load (lb):
- 300 lb
- Sub Brand:
- CADDY
- Type:
- Malleable Split Ring Hangers
455 Malleable Split Ring Hanger, EG, 2 1/2" Pipe, 2.875" OD, 1/2" Rod
manufacturer discounts
learn about discounts
- $15.80 for $1,300.00+
- $14.95 for $2,000.00+
- $14.34 for $3,000.00+
$17.62 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$9.18 / EA
manufacturer discounts
learn about discounts
- $8.23 for $1,300.00+
- $7.78 for $2,000.00+
- $7.47 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
455 Malleable Split Ring Hanger, Plain, 2 1/2" Pipe, 2.875" OD, 1/2" Rod
455 Malleable Split Ring Hanger, Plain, 2 1/2" Pipe, 2.875" OD, 1/2" Rod
150
- Recommended for the suspension of stationary non-insulated pipe lines
- Allows for piping runs close to ceiling or walls
- Conforms with Federal Specification WW-H-171 (Type 25), Manufacturers Standardization Society (MSS) SP-58 (Type 12)
- Recommended for the suspension of stationary non-insulated pipe lines
- Allows for piping runs close to ceiling or walls
- Conforms with Federal Specification WW-H-171 (Type 25), Manufacturers Standardization Society (MSS) SP-58 (Type 12)
- UPC
- 782856368762
- UNSPSC
- 40141725
- Country of Origin
- CN
- Material:
- Cast Iron
- Type:
- Malleable Split Ring Hangers
- Finish:
- Plain
- Material:
- Cast Iron
- Outer Diameter (Imperial) <Nom>:
- 2 7/8 in
- Pipe Size <Nom>:
- 2 1/2 in
- Rod Size (Imperial):
- 1/2 in
- Standard:
- None
- Static Load (lb):
- 300 lb
- Sub Brand:
- CADDY
- Type:
- Malleable Split Ring Hangers
455 Malleable Split Ring Hanger, Plain, 2 1/2" Pipe, 2.875" OD, 1/2" Rod
manufacturer discounts
learn about discounts
- $8.23 for $1,300.00+
- $7.78 for $2,000.00+
- $7.47 for $3,000.00+
$9.18 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$3.19 / EA
manufacturer discounts
learn about discounts
- $2.86 for $1,300.00+
- $2.71 for $2,000.00+
- $2.60 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
402 Clevis Hanger for Copper Tube, Light Duty, 1" Pipe, 1.125" OD, 3/8" Rod
402 Clevis Hanger for Copper Tube, Light Duty, 1" Pipe, 1.125" OD, 3/8" Rod
150
- Recommended for the suspension of stationary non-insulated copper tube lines
- Conforms with U.S. Federal Specification WW-H-171 (Type 12), Manufacturers Standardization Society (MSS) SP-58 (Type 1)
- Recommended for the suspension of stationary non-insulated copper tube lines
- Conforms with U.S. Federal Specification WW-H-171 (Type 12), Manufacturers Standardization Society (MSS) SP-58 (Type 1)
- UPC
- 782856355793
- UNSPSC
- 40141725
- Country of Origin
- CN
- Material:
- Steel
- Type:
- Clevis Hangers
- Finish:
- Copper Electroplated
- Material:
- Steel
- Outer Diameter (Imperial) <Nom>:
- 1 1/8 in
- Pipe Size <Nom>:
- 1 in
- Rod Size (Imperial):
- 3/8 in
- Standard:
- None
- Static Load (lb):
- 215 lb
- Sub Brand:
- CADDY
- Type:
- Clevis Hangers
402 Clevis Hanger for Copper Tube, Light Duty, 1" Pipe, 1.125" OD, 3/8" Rod
manufacturer discounts
learn about discounts
- $2.86 for $1,300.00+
- $2.71 for $2,000.00+
- $2.60 for $3,000.00+
$3.19 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$43.00 / EA
manufacturer discounts
learn about discounts
- $38.55 for $1,300.00+
- $36.47 for $2,000.00+
- $34.99 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Steel Flange Adapter for 1/4"�3/4" Flange electrogalvanized
Steel Flange Adapter for 1/4"�3/4" Flange electrogalvanized
150
- Installs on top or bottom flange of I-beams? or bar joists
- Low profile easily fits between metal deck and steel structure
- Thumb spring retainer allows for ease of positioning
- Available pre-assembled to the Universal Structural Bracket, eliminating field assembly
- Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
- Meets NFPA� 13 as pre-qualified for seismic applications
- FM� Specification Tested
- Installs on top or bottom flange of I-beams? or bar joists
- Low profile easily fits between metal deck and steel structure
- Thumb spring retainer allows for ease of positioning
- Available pre-assembled to the Universal Structural Bracket, eliminating field assembly
- Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
- Meets NFPA� 13 as pre-qualified for seismic applications
- FM� Specification Tested
- UPC
- 782856920083
- UNSPSC
- 40141725
- Country of Origin
- US
- Material:
- Steel
- Type:
- Structural Attachments for Rigid Bracing
- Finish:
- Electrogalvanized
- Flange Thickness (Imperial) <Max>:
- 3/4 in
- Material:
- Steel
- Material of Construction:
- Steel
- Pipe Size:
- 1/2"
- Rod Size (Imperial):
- 1/2 in
- Sub Brand:
- CADDY
- Type:
- Structural Attachments for Rigid Bracing
- Width:
- 1/4" – 3/4"
Steel Flange Adapter for 1/4"�3/4" Flange electrogalvanized
manufacturer discounts
learn about discounts
- $38.55 for $1,300.00+
- $36.47 for $2,000.00+
- $34.99 for $3,000.00+
$43.00 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$99.43 / EA
manufacturer discounts
learn about discounts
- $89.14 for $1,300.00+
- $84.34 for $2,000.00+
- $80.92 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Steel Flange Adapter, EG, 3/4"�1 1/4" Flange
Steel Flange Adapter, EG, 3/4"�1 1/4" Flange
150
- Installs on top or bottom flange of I-beams? or bar joists
- Low profile easily fits between metal deck and steel structure
- Thumb spring retainer allows for ease of positioning
- Available pre-assembled to the Universal Structural Bracket, eliminating field assembly
- Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
- Meets NFPA� 13 as pre-qualified for seismic applications
- FM� Specification Tested
- Installs on top or bottom flange of I-beams? or bar joists
- Low profile easily fits between metal deck and steel structure
- Thumb spring retainer allows for ease of positioning
- Available pre-assembled to the Universal Structural Bracket, eliminating field assembly
- Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
- Meets NFPA� 13 as pre-qualified for seismic applications
- FM� Specification Tested
- UPC
- 782856920106
- UNSPSC
- 40141725
- Country of Origin
- US
- Material:
- Steel
- Type:
- Structural Attachments for Rigid Bracing
- Finish:
- Electrogalvanized
- Flange Thickness (Imperial) <Max>:
- 1 1/4 in
- Material:
- Steel
- Material of Construction:
- Steel
- Pipe Size:
- 1/2"
- Rod Size (Imperial):
- 1/2 in
- Sub Brand:
- CADDY
- Type:
- Structural Attachments for Rigid Bracing
- Width:
- 3/4" – 1 1/4"
Steel Flange Adapter, EG, 3/4"�1 1/4" Flange
manufacturer discounts
learn about discounts
- $89.14 for $1,300.00+
- $84.34 for $2,000.00+
- $80.92 for $3,000.00+
$99.43 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$21.78 / EA
manufacturer discounts
learn about discounts
- $19.52 for $1,300.00+
- $18.47 for $2,000.00+
- $17.72 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Universal Structural Bracket, EG, 9/16" Hole
Universal Structural Bracket, EG, 9/16" Hole
150
- Universal design allows one product to attach directly to concrete, wood, bar joist or I-beam adapters
- Integrated angle gauge easily displays brace member angle of installation
- Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
- Works with 1" through 2" brace pipes to reduce inventory
- Low profile minimizes prying effect on concrete fasteners
- Meets NFPA� 13 as pre-qualified for seismic applications
- FM� Specification Tested
- Universal design allows one product to attach directly to concrete, wood, bar joist or I-beam adapters
- Integrated angle gauge easily displays brace member angle of installation
- Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
- Works with 1" through 2" brace pipes to reduce inventory
- Low profile minimizes prying effect on concrete fasteners
- Meets NFPA� 13 as pre-qualified for seismic applications
- FM� Specification Tested
- UPC
- 782856920076
- UNSPSC
- 40141725
- Country of Origin
- US
- Material:
- Steel
- Type:
- Structural Attachments for Rigid Bracing
- Finish:
- Electrogalvanized
- Hole Size (Imperial) <Nom>:
- 9/16 in
- Material:
- Steel
- Material of Construction:
- Steel
- Sub Brand:
- CADDY
- Type:
- Structural Attachments for Rigid Bracing
- Width:
- 1 15/16"
- Width (Imperial) <Nom>:
- 1 15/16 in
Universal Structural Bracket, EG, 9/16" Hole
manufacturer discounts
learn about discounts
- $19.52 for $1,300.00+
- $18.47 for $2,000.00+
- $17.72 for $3,000.00+
$21.78 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$30.52 / EA
manufacturer discounts
learn about discounts
- $27.36 for $1,300.00+
- $25.89 for $2,000.00+
- $24.84 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Universal Structural Bracket, EG, 13/16" Hole
Universal Structural Bracket, EG, 13/16" Hole
150
- Universal design allows one product to attach directly to concrete, wood, bar joist or I-beam adapters
- Integrated angle gauge easily displays brace member angle of installation
- Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
- Works with 1" through 2" brace pipes to reduce inventory
- Low profile minimizes prying effect on concrete fasteners
- Meets NFPA� 13 as pre-qualified for seismic applications
- FM� Specification Tested
- Universal design allows one product to attach directly to concrete, wood, bar joist or I-beam adapters
- Integrated angle gauge easily displays brace member angle of installation
- Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
- Works with 1" through 2" brace pipes to reduce inventory
- Low profile minimizes prying effect on concrete fasteners
- Meets NFPA� 13 as pre-qualified for seismic applications
- FM� Specification Tested
- UPC
- 782856920069
- UNSPSC
- 40141725
- Country of Origin
- US
- Material:
- Steel
- Type:
- Structural Attachments for Rigid Bracing
- Finish:
- Electrogalvanized
- Hole Size (Imperial) <Nom>:
- 13/16 in
- Material:
- Steel
- Material of Construction:
- Steel
- Sub Brand:
- CADDY
- Type:
- Structural Attachments for Rigid Bracing
- Width:
- 1 15/16"
- Width (Imperial) <Nom>:
- 1 15/16 in
Universal Structural Bracket, EG, 13/16" Hole
manufacturer discounts
learn about discounts
- $27.36 for $1,300.00+
- $25.89 for $2,000.00+
- $24.84 for $3,000.00+
$30.52 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders