Products

$206.25 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Scotchcast™ Electrical Resin 2123 is a soft, 2 part polybutadiene resin encapsulant. This resin has good handling and performance characteristics and is formulated for re enterable splice protection. This multi purpose, moisture sealing resin bonds to nearly all cable jackets.
3M™ Scotchcast™ Electrical Resin 2123 is a soft, 2 part polybutadiene resin encapsulant. This resin has good handling and performance characteristics and is formulated for re enterable splice protection. This multi purpose, moisture sealing resin bonds to nearly all cable jackets.
3M™ Scotchcast™ Electrical Insulating Resin 2123 has good wetting and low viscosity properties. This flexible resin ensures curing at room temperature...
3M™ Scotchcast™ Electrical Insulating Resin 2123 has good wetting and low viscosity properties. This flexible resin ensures curing at room temperature and acts as an insulating material for cable splices operating up to 1 kV. It flows easily, even at low temperatures, while filling the enclosure and minimizing voids. ASTM Approved and RoHS 2011/65/EU Compliant.
- Typical hardness (ASTM D2240) - 0 Shore A
- Has 62-minute gel time at 73 °F (23 °C)
- Useful for sealing and electrical insulation in potting applications.
- Withstands a temperature range of 32 to 194 °F (0 to 90 °C)
- Typical hardness (ASTM D2240) - 0 Shore A
- Has 62-minute gel time at 73 °F (23 °C)
- Useful for sealing and electrical insulation in potting applications.
- Withstands a temperature range of 32 to 194 °F (0 to 90 °C)
- UPC
- 051128595022
- UNSPSC
- 13111001
- Country of Origin
- USA
3M™ Scotchcast™ Electrical Resin 2123 is a soft, 2 part polybutadiene resin encapsulant. This resin has good handling and performance characteristics and is formulated for re enterable splice protecti...

$10.17 / EA
3M™ Fire Block Foam FB-Foam is a fireblock and draftstop used to help seal, fill, insulate and bond for non-rated residential and commercial construction. This foam-in-place fireblock is heat-resistant (up to 240°F/115°C) and meets ASTM E 84 (mod) Class 1 for smoke spread and flame development. This fireblock foam is ready-to-use and tack-free in approximately 5 minutes.
3M™ Fire Block Foam FB-Foam is a fireblock and draftstop used to help seal, fill, insulate and bond for non-rated residential and commercial construction. This foam-in-place fireblock is heat-resistant (up to 240°F/115°C) and meets ASTM E 84 (mod) Class 1 for smoke spread and flame development. This fireblock foam is ready-to-use and tack-free in approximately 5 minutes.
Reliable and Tough Fireblock3M™ Fire Block Foam FB-Foam is engineered as a durable fireblock and draftstop. This product seals, fills, insulates and b...
Reliable and Tough Fireblock3M™ Fire Block Foam FB-Foam is engineered as a durable fireblock and draftstop. This product seals, fills, insulates and bonds for non-rated residential and commercial construction. Ready-to-use, this fireblock foam is intended to resist the free passage of flame and by-products of combustion within a concealed space of a floor, ceiling or wall cavity – restricting the movement of air, fire and smoke. This foam is tested as a Type V commercial and residential fireblock to ASTM E 84 (modified) and acts as a draftstop to help reduce air infiltration. This ready-to-use product is heat-resistant (up to 240°F/115°C) and expands up to 200% in volume to effectively seal penetrations.Recommended Applications3M™ Fire Block Foam FB-Foam is used to seal interior construction voids around:WiresPipesCablesPenetrations in non-rated wood or steel-framed constructionNon-rated framing gaps and voidsSeals and Protects3M™ Fire Block Foam FB-Foam has been evaluated by the UL evaluation report ER9700-01 and complies with the International Building Code (IBC) and International Residential Code (IRC). This is a thermal insulator foam that offers an R-Value of 4-5/inch (25.4 mm) typical. In addition, this fireblock foam is tack-free in approximately 5 minutes and features minimal shrinkage and sag-resistant formulation to help ensure longevity. This foam also provides excellent adhesion that bonds to concrete, brick, metals, wood, plastic and cable jacketing.Strong Fireblocking Solution3M™ Fire Block Foam FB-Foam is a tough solution that helps seal, fill, insulate and bond for non-rated residential and commercial construction. Discover the benefits of a fireblock foam that restricts the movement of air, fire and smoke. Enjoy the peace of mind of that comes from a product designed to meet fireblocking codes and requirements.
- Tested as a Type V residential Fireblock to ASTM E 84 (modified)
- Durable foam is heat-resistant (up to 240°F/115°C)
- Acts as a draftstop to help reduce air infiltration
- Thermal insulator foam offers an R-Value of 4-5/inch (25.4 mm) typical
- Tested as a Type V residential Fireblock to ASTM E 84 (modified)
- Durable foam is heat-resistant (up to 240°F/115°C)
- Acts as a draftstop to help reduce air infiltration
- Thermal insulator foam offers an R-Value of 4-5/inch (25.4 mm) typical
- UPC
- 051115549076
- UNSPSC
- 13111303
- Country of Origin
- USA
- Color:
- Orange
- Color:
- Orange
3M™ Fire Block Foam FB-Foam is a fireblock and draftstop used to help seal, fill, insulate and bond for non-rated residential and commercial construction. This foam-in-place fireblock is heat-resistan...
$10.17 / EA

$1,002.70 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 8096 Series Cold Shrink Resin Mine and Portable Cable Splice Kit with flame retardant compound 2131 is designed for splicing SHD GC, MPF GC and MPF non shielded cables that are 5 to 15 kV rated. It provides splicing on draglines, power shovels, drills, type MPF underground power feeder cables and select trailing cables.
3M™ 8096 Series Cold Shrink Resin Mine and Portable Cable Splice Kit with flame retardant compound 2131 is designed for splicing SHD GC, MPF GC and MPF non shielded cables that are 5 to 15 kV rated. It provides splicing on draglines, power shovels, drills, type MPF underground power feeder cables and select trailing cables.
- Designed for splicing SHD-GC, MPF-GC and MPF non-shielded cables
- Flame-retardant resin 2131 is used as an insulating material for cable splices
- Perfect for use on draglines, power shovels, drills and type MPF underground power feeder cables
- Rated for 5 to 15 kV applications
- Designed for splicing SHD-GC, MPF-GC and MPF non-shielded cables
- Flame-retardant resin 2131 is used as an insulating material for cable splices
- Perfect for use on draglines, power shovels, drills and type MPF underground power feeder cables
- Rated for 5 to 15 kV applications
- UPC
- 051128591796
- UNSPSC
- 13111001
- Country of Origin
- USA
3M™ 8096 Series Cold Shrink Resin Mine and Portable Cable Splice Kit with flame retardant compound 2131 is designed for splicing SHD GC, MPF GC and MPF non shielded cables that are 5 to 15 kV rated. I...

$1,714.65 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 8096 Series Cold Shrink Resin Mine and Portable Cable Splice Kit with flame retardant compound 2131 is designed for splicing SHD GC, MPF GC and MPF non shielded cables that are 5 to 15 kV rated. It provides splicing on draglines, power shovels, drills, type MPF underground power feeder cables and select trailing cables.
3M™ 8096 Series Cold Shrink Resin Mine and Portable Cable Splice Kit with flame retardant compound 2131 is designed for splicing SHD GC, MPF GC and MPF non shielded cables that are 5 to 15 kV rated. It provides splicing on draglines, power shovels, drills, type MPF underground power feeder cables and select trailing cables.
- Designed for splicing SHD-GC, MPF-GC and MPF non-shielded cables
- Flame-retardant resin 2131 is used as an insulating material for cable splices
- Perfect for use on draglines, power shovels, drills and type MPF underground power feeder cables
- Rated for 5 to 15 kV applications
- Designed for splicing SHD-GC, MPF-GC and MPF non-shielded cables
- Flame-retardant resin 2131 is used as an insulating material for cable splices
- Perfect for use on draglines, power shovels, drills and type MPF underground power feeder cables
- Rated for 5 to 15 kV applications
- UPC
- 051128591802
- UNSPSC
- 13111001
- Country of Origin
- USA
3M™ 8096 Series Cold Shrink Resin Mine and Portable Cable Splice Kit with flame retardant compound 2131 is designed for splicing SHD GC, MPF GC and MPF non shielded cables that are 5 to 15 kV rated. I...

$62.21 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.
3M™ Scotchcast™ 72 N Series Inline Splice Kit helps in sealing collars or splice body ends, and the jumper wire with clips offers solderless shield co...
3M™ Scotchcast™ 72 N Series Inline Splice Kit helps in sealing collars or splice body ends, and the jumper wire with clips offers solderless shield continuity on shielded cables. RoHS 2011/65/EU Compliant?.
- Rigid body splice for joining signal and control cables
- Fits unshielded construction of plastic or rubber-jacketed cables
- Designed for inline splicing of underground systems, joining of cable reel ends, direct burial applications and repair of cable failures
- Rated for 1 kV applications
- Rigid body splice for joining signal and control cables
- Fits unshielded construction of plastic or rubber-jacketed cables
- Designed for inline splicing of underground systems, joining of cable reel ends, direct burial applications and repair of cable failures
- Rated for 1 kV applications
- UPC
- 054007106234
- UNSPSC
- 13111001
- Country of Origin
- USA
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed...

$304.48 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.
3M™ Scotchcast™ 72 N Series Inline Splice Kit helps in sealing collars or splice body ends, and the jumper wire with clips offers solderless shield co...
3M™ Scotchcast™ 72 N Series Inline Splice Kit helps in sealing collars or splice body ends, and the jumper wire with clips offers solderless shield continuity on shielded cables. RoHS 2011/65/EU Compliant?.
- Rigid body splice for joining signal and control cables
- Fits unshielded construction of plastic or rubber-jacketed cables
- Designed for inline splicing of underground systems, joining of cable reel ends, direct burial applications and repair of cable failures
- Rated for 1 kV applications
- Rigid body splice for joining signal and control cables
- Fits unshielded construction of plastic or rubber-jacketed cables
- Designed for inline splicing of underground systems, joining of cable reel ends, direct burial applications and repair of cable failures
- Rated for 1 kV applications
- UPC
- 054007106296
- UNSPSC
- 13111001
- Country of Origin
- USA
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed...

$454.92 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.
3M™ Scotchcast™ 72 N Series Inline Splice Kit helps in sealing collars or splice body ends, and the jumper wire with clips offers solderless shield co...
3M™ Scotchcast™ 72 N Series Inline Splice Kit helps in sealing collars or splice body ends, and the jumper wire with clips offers solderless shield continuity on shielded cables. RoHS 2011/65/EU Compliant?.
- Rigid body splice for joining signal and control cables
- Fits unshielded construction of plastic or rubber-jacketed cables
- Designed for inline splicing of underground systems, joining of cable reel ends, direct burial applications and repair of cable failures
- Rated for 1 kV applications
- Rigid body splice for joining signal and control cables
- Fits unshielded construction of plastic or rubber-jacketed cables
- Designed for inline splicing of underground systems, joining of cable reel ends, direct burial applications and repair of cable failures
- Rated for 1 kV applications
- UPC
- 054007106319
- UNSPSC
- 13111001
- Country of Origin
- USA
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed...

$1,024.28 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.
3M™ Scotchcast™ 72 N Series Inline Splice Kit helps in sealing collars or splice body ends, and the jumper wire with clips offers solderless shield co...
3M™ Scotchcast™ 72 N Series Inline Splice Kit helps in sealing collars or splice body ends, and the jumper wire with clips offers solderless shield continuity on shielded cables. RoHS 2011/65/EU Compliant?.
- Rigid body splice for joining signal and control cables
- Fits unshielded construction of plastic or rubber-jacketed cables
- Designed for inline splicing of underground systems, joining of cable reel ends, direct burial applications and repair of cable failures
- Rated for 1 kV applications
- Rigid body splice for joining signal and control cables
- Fits unshielded construction of plastic or rubber-jacketed cables
- Designed for inline splicing of underground systems, joining of cable reel ends, direct burial applications and repair of cable failures
- Rated for 1 kV applications
- UPC
- 054007106333
- UNSPSC
- 13111001
- Country of Origin
- USA
3M™ Scotchcast™ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed...