Products
$630.00 / EA
manufacturer discounts
learn about discounts
- $585.00 for $200.00+
- $562.50 for $500.00+
- $540.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
A device that works with Lutron lighting controls to provide an emergency lighting solution. The device is capable of sensing normal (non-essential) line voltage power and accepting an output from a fire alarm control panel (FACP). Upon loss of normal power or receiving a signal from the FACP, it will send a signal to the compatible Lutron control(s) to which it is connected. This signal will cause the controls to enter the emergency lighting mode and any lights controlled will go to the emergen...
A device that works with Lutron lighting controls to provide an emergency lighting solution. The device is capable of sensing normal (non-essential) line voltage power and accepting an output from a fire alarm control panel (FACP). Upon loss of normal power or receiving a signal from the FACP, it will send a signal to the compatible Lutron control(s) to which it is connected. This signal will cause the controls to enter the emergency lighting mode and any lights controlled will go to the emergency light level setting
150
- Compatible Lutron controls GP, LP, LCP, XP, XPS, CCP, CXP, and HS Energi Savr Node units GRAFIK Eye QS units Quantum lighting management hubs with EcoSystem bus supplies
- ULR 924 & CSA C22.2 No. 141-02 listed as “Emergency Lighting and Power Equipment”
- Requires a 24V power feed from a source on normal / emergency (essential) power for unit to operate.
- Status light indicates the phase status. Status light “ON” is normal mode, “OFF” is emergency mode.
- A test button is provided to perform a functional test of the system by simulating an emergency situation.
- Accepts a maintained dry contact closure from an FACP to actuate the emergency mode.
- Senses line voltage from 100 - 347V
- Compatible Lutron controls GP, LP, LCP, XP, XPS, CCP, CXP, and HS Energi Savr Node units GRAFIK Eye QS units Quantum lighting management hubs with EcoSystem bus supplies
- ULR 924 & CSA C22.2 No. 141-02 listed as “Emergency Lighting and Power Equipment”
- Requires a 24V power feed from a source on normal / emergency (essential) power for unit to operate.
- Status light indicates the phase status. Status light “ON” is normal mode, “OFF” is emergency mode.
- A test button is provided to perform a functional test of the system by simulating an emergency situation.
- Accepts a maintained dry contact closure from an FACP to actuate the emergency mode.
- Senses line voltage from 100 - 347V
- UPC
- 027557067058
- UNSPSC
- 39111710
- Country of Origin
- US
- Color:
- White
- Type:
- Emergency Lighting Interface
- Color:
- White
- Standard:
- cUL, NOM
- Type:
- Emergency Lighting Interface
A device that works with Lutron lighting controls to provide an emergency lighting solution. The device is capable of sensing normal (non-essential) line voltage power and accepting an output from a f...
manufacturer discounts
learn about discounts
- $585.00 for $200.00+
- $562.50 for $500.00+
- $540.00 for $1,000.00+
$630.00 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$47.60 / EA
manufacturer discounts
learn about discounts
- $44.20 for $200.00+
- $42.50 for $500.00+
- $40.80 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Heavy duty , coated, 9-gauge wire guards for LOS-WDT, LOS-WIR, and all in-wall sensors
Heavy duty , coated, 9-gauge wire guards for LOS-WDT, LOS-WIR, and all in-wall sensors
150
- Protect in-wall or surface-mount sensors
- Heavy-duty, coated, 9-gauge metal wire
- Common applications include: Gymnasiums, Warehouses, Locker rooms, Multi-purpose rooms
- Mounting clips included
- Multiple models available depending on type of sensor to be protected
- Available in white only
- Protect in-wall or surface-mount sensors
- Heavy-duty, coated, 9-gauge metal wire
- Common applications include: Gymnasiums, Warehouses, Locker rooms, Multi-purpose rooms
- Mounting clips included
- Multiple models available depending on type of sensor to be protected
- Available in white only
- UPC
- 784276092494
- UNSPSC
- 39111815
- Country of Origin
- US
- Color:
- White
- Material:
- Coated 9-gauge Metal Wire
- Type:
- Wire cage guard
- Color:
- White
- Height:
- 4.5 in
- Length:
- NaN in
- Material:
- Coated 9-gauge Metal Wire
- Mounting:
- Surface
- Type:
- Wire cage guard
- Width:
- 5.75 in
Heavy duty , coated, 9-gauge wire guards for LOS-WDT, LOS-WIR, and all in-wall sensors
manufacturer discounts
learn about discounts
- $44.20 for $200.00+
- $42.50 for $500.00+
- $40.80 for $1,000.00+
$47.60 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$97.30 / EA
manufacturer discounts
learn about discounts
- $90.35 for $200.00+
- $86.88 for $500.00+
- $83.40 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
UL listed Hi-Lume A-Series driver, EcoSystem or 3-wire, 24 V, provides continuous flicker-free dimming for constant current or voltage LED sources
UL listed Hi-Lume A-Series driver, EcoSystem or 3-wire, 24 V, provides continuous flicker-free dimming for constant current or voltage LED sources
150
- Continuous, flicker-free dimming from 100% to 1%.
- Compatible with Energi Savr Node unit with EcoSystem, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem, and Quantum systems, allowing for integration into a planned or existing EcoSystem lighting control solution.
- Standard 3-wire, line-voltage phase-control technology for consistent dimming performance and compatibility with all Lutron 3-wire ffluorescent controls.
- QwikFig compatible. For more information please refer to Lutron P/N 367-2533 (K and M case only).
- Line voltage miswire protection on EcoSystem control inputs.
- A rated lifetime of 50,000 hours @: tc = 149 deg F (65 deg C) for 40 W drivers tc = 158 deg F (70 deg C) for 50 W drivers
- UL recognized and listed options for United States and Canada.
- NOM certified option for Mexico.
- Type TL Rated.
- Continuous, flicker-free dimming from 100% to 1%.
- Compatible with Energi Savr Node unit with EcoSystem, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem, and Quantum systems, allowing for integration into a planned or existing EcoSystem lighting control solution.
- Standard 3-wire, line-voltage phase-control technology for consistent dimming performance and compatibility with all Lutron 3-wire ffluorescent controls.
- QwikFig compatible. For more information please refer to Lutron P/N 367-2533 (K and M case only).
- Line voltage miswire protection on EcoSystem control inputs.
- A rated lifetime of 50,000 hours @: tc = 149 deg F (65 deg C) for 40 W drivers tc = 158 deg F (70 deg C) for 50 W drivers
- UL recognized and listed options for United States and Canada.
- NOM certified option for Mexico.
- Type TL Rated.
- UPC
- 784276075435
- UNSPSC
- 39112103
- Country of Origin
- MX
- Amperage Rating:
- 1.6 A
- Type:
- LED Driver
- Voltage Rating:
- 20.5 to 24 V
- Wattage:
- 5 to 40 W
- Amperage Rating:
- 1.6 A
- Dimmable:
- Dimmable
- Frequency Rating:
- 50/60 Hz
- Height:
- 1 in
- Input Current:
- .37 A@120 V to .16 A@277 V
- Lamp Type:
- LED
- Length:
- NaN in
- Mounting:
- Junction Box
- Operating Temperature:
- 32 to 104 F (0 to 40 C) F
- Power Factor:
- Greater than .90 for loads greater than 25 W
- Standard:
- UL, RoHS compliant, FCC part 15 compliant for commercial applications at 120 VAC to 277 VAC Type TL rated
- Sub Brand:
- Hi-lume 1%
- Type:
- LED Driver
- Voltage Rating:
- 20.5 to 24 V
- Wattage:
- 5 to 40 W
- Width:
- 3 in
UL listed Hi-Lume A-Series driver, EcoSystem or 3-wire, 24 V, provides continuous flicker-free dimming for constant current or voltage LED sources
manufacturer discounts
learn about discounts
- $90.35 for $200.00+
- $86.88 for $500.00+
- $83.40 for $1,000.00+
$97.30 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$97.30 / EA
manufacturer discounts
learn about discounts
- $90.35 for $200.00+
- $86.88 for $500.00+
- $83.40 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
UL listed Hi-Lume A-Series driver, EcoSystem or 3-wire, 12 V, provides continuous flicker-free dimming for constant current or voltage LED sources
UL listed Hi-Lume A-Series driver, EcoSystem or 3-wire, 12 V, provides continuous flicker-free dimming for constant current or voltage LED sources
150
- Continuous, flicker-free dimming from 100% to 1%.
- Compatible with Energi Savr Node unit with EcoSystem, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem, and Quantum systems, allowing for integration into a planned or existing EcoSystem lighting control solution.
- Standard 3-wire, line-voltage phase-control technology for consistent dimming performance and compatibility with all Lutron 3-wire ffluorescent controls.
- QwikFig compatible. For more information please refer to Lutron P/N 367-2533 (K and M case only).
- Line voltage miswire protection on EcoSystem control inputs.
- A rated lifetime of 50,000 hours @: tc = 149 deg F (65 deg C) for 40 W drivers tc = 158 deg F (70 deg C) for 50 W drivers
- UL recognized and listed options for United States and Canada.
- NOM certified option for Mexico.
- Type TL Rated.
- Continuous, flicker-free dimming from 100% to 1%.
- Compatible with Energi Savr Node unit with EcoSystem, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem, and Quantum systems, allowing for integration into a planned or existing EcoSystem lighting control solution.
- Standard 3-wire, line-voltage phase-control technology for consistent dimming performance and compatibility with all Lutron 3-wire ffluorescent controls.
- QwikFig compatible. For more information please refer to Lutron P/N 367-2533 (K and M case only).
- Line voltage miswire protection on EcoSystem control inputs.
- A rated lifetime of 50,000 hours @: tc = 149 deg F (65 deg C) for 40 W drivers tc = 158 deg F (70 deg C) for 50 W drivers
- UL recognized and listed options for United States and Canada.
- NOM certified option for Mexico.
- Type TL Rated.
- UPC
- 784276075442
- UNSPSC
- 39112103
- Country of Origin
- MX
- Amperage Rating:
- 3.3 A
- Type:
- LED Driver
- Voltage Rating:
- 10 to 12 V
- Wattage:
- 5 to 40 W
- Amperage Rating:
- 3.3 A
- Dimmable:
- Dimmable
- Frequency Rating:
- 50/60 Hz
- Height:
- 1 in
- Input Current:
- .39 A@120 V to .17 A@277 V
- Lamp Type:
- LED
- Length:
- NaN in
- Mounting:
- Junction Box
- Operating Temperature:
- 32 to 104 F (0 to 40 C) F
- Power Factor:
- Greater than .90 for loads greater than 25 W
- Standard:
- UL, RoHS compliant, FCC part 15 compliant for commercial applications at 120 VAC to 277 VAC Type TL rated
- Sub Brand:
- Hi-lume 1%
- Type:
- LED Driver
- Voltage Rating:
- 10 to 12 V
- Wattage:
- 5 to 40 W
- Width:
- 3 in
UL listed Hi-Lume A-Series driver, EcoSystem or 3-wire, 12 V, provides continuous flicker-free dimming for constant current or voltage LED sources
manufacturer discounts
learn about discounts
- $90.35 for $200.00+
- $86.88 for $500.00+
- $83.40 for $1,000.00+
$97.30 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$14.00 / EA
manufacturer discounts
learn about discounts
- $13.00 for $200.00+
- $12.50 for $500.00+
- $12.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Ballast adapter plate used when a non-studded B-can is being replaced by a non-studded K-can
Ballast adapter plate used when a non-studded B-can is being replaced by a non-studded K-can
150
- UPC
- 027557794848
- UNSPSC
- 39111821
- Country of Origin
- US
- Color:
- White
- Material:
- Metal
- Size:
- 6.73 in (171 mm) x 2.96 in (75 mm)
- Type:
- Adapter plate
- Color:
- White
- Consist Of:
- Plate
- Fixture Type:
- Fluorescent
- Material:
- Metal
- Mounting:
- Fixture
- Size:
- 6.73 in (171 mm) x 2.96 in (75 mm)
- Type:
- Adapter plate
Ballast adapter plate used when a non-studded B-can is being replaced by a non-studded K-can
manufacturer discounts
learn about discounts
- $13.00 for $200.00+
- $12.50 for $500.00+
- $12.00 for $1,000.00+
$14.00 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$1,505.00 / EA
manufacturer discounts
learn about discounts
- $1,397.50 for $200.00+
- $1,343.75 for $500.00+
- $1,290.00 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
GRAFIK Eye QS Wireless with EcoSystem is the premier energysaving lighting and shade control. The GRAFIK Eye QS control unit features an astronomic timeclock and intuitive lighting presets, which are seamlessly integrated with EcoSystem LED drivers and Lutron's QS components and systems.
GRAFIK Eye QS Wireless with EcoSystem is the premier energysaving lighting and shade control. The GRAFIK Eye QS control unit features an astronomic timeclock and intuitive lighting presets, which are seamlessly integrated with EcoSystem LED drivers and Lutron's QS components and systems.
150
- UPC
- 027557641579
- UNSPSC
- 39112403
- Country of Origin
- US
- Color:
- White
- Type:
- Wireless Control Unit
- Color:
- White
- Environmental Conditions:
- 32 to 104В°F (0 to 40 В°C); Relative humidity less than 90% non condensing
- Input Voltage:
- 120-127 or 220-240 V 50/60 Hz
- Standard:
- UL, CSA, FCC, IC, SCT, NOM, CEC (title24)
- Sub Brand:
- GRAFIK Eye QS
- Terminals:
- 4
- Type:
- Wireless Control Unit
GRAFIK Eye QS Wireless with EcoSystem is the premier energysaving lighting and shade control. The GRAFIK Eye QS control unit features an astronomic timeclock and intuitive lighting presets, which are...
manufacturer discounts
learn about discounts
- $1,397.50 for $200.00+
- $1,343.75 for $500.00+
- $1,290.00 for $1,000.00+
$1,505.00 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$97.30 / EA
manufacturer discounts
learn about discounts
- $90.35 for $200.00+
- $86.88 for $500.00+
- $83.40 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
UL listed Hi-Lume A-Series driver, forward phase, 12 V, provides continuous flicker-free dimming for constant current or voltage LED sources
UL listed Hi-Lume A-Series driver, forward phase, 12 V, provides continuous flicker-free dimming for constant current or voltage LED sources
150
- Continuous, flicker-free dimming from 100% to 1%.
- Guaranteed compatibility with selected Maestro Wireless, RadioRA 2, Homeworks, GRAFIK Eye QS, GRAFIK Systems, Quantum, and CL dimmers.
- A rated lifetime of 50,000 hours @ tc =149 deg F (65 deg C).
- QwikFig compatible. For more information, please refer to the QwikFig User Guide (Lutron P/N 041473) or contact your Lutron sales representative (K and M case only).
- Remote-mount options for United States and Canada.
- NOM certified option for Mexico.
- 100% factory tested
- Continuous, flicker-free dimming from 100% to 1%.
- Guaranteed compatibility with selected Maestro Wireless, RadioRA 2, Homeworks, GRAFIK Eye QS, GRAFIK Systems, Quantum, and CL dimmers.
- A rated lifetime of 50,000 hours @ tc =149 deg F (65 deg C).
- QwikFig compatible. For more information, please refer to the QwikFig User Guide (Lutron P/N 041473) or contact your Lutron sales representative (K and M case only).
- Remote-mount options for United States and Canada.
- NOM certified option for Mexico.
- 100% factory tested
- UPC
- 784276075503
- UNSPSC
- 39112103
- Country of Origin
- MX
- Amperage Rating:
- 3.3 A
- Type:
- LED Driver
- Voltage Rating:
- 10 to 12 V
- Wattage:
- 5 to 40 W
- Amperage Rating:
- 3.3 A
- Dimmable:
- Dimmable
- Frequency Rating:
- 50/60 Hz
- Height:
- 1 in
- Input Current:
- .41 A
- Lamp Type:
- LED
- Length:
- NaN in
- Mounting:
- Junction Box
- Operating Temperature:
- 32 to 104 F (0 to 40 C) F
- Power Factor:
- Greater than .90 for loads at 40 W
- Standard:
- UL, RoHS compliant, FCC part 15 compliant for residential applications at 120 VAC, Type TL rated
- Sub Brand:
- Hi-lume 1%
- Type:
- LED Driver
- Voltage Rating:
- 10 to 12 V
- Wattage:
- 5 to 40 W
- Width:
- 3 in
UL listed Hi-Lume A-Series driver, forward phase, 12 V, provides continuous flicker-free dimming for constant current or voltage LED sources
manufacturer discounts
learn about discounts
- $90.35 for $200.00+
- $86.88 for $500.00+
- $83.40 for $1,000.00+
$97.30 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$97.30 / EA
manufacturer discounts
learn about discounts
- $90.35 for $200.00+
- $86.88 for $500.00+
- $83.40 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
UL listed Hi-Lume A-Series driver, forward phase, 24 V, provides continuous flicker-free dimming for constant current or voltage LED sources
UL listed Hi-Lume A-Series driver, forward phase, 24 V, provides continuous flicker-free dimming for constant current or voltage LED sources
150
- Continuous, flicker-free dimming from 100% to 1%.
- Guaranteed compatibility with selected Maestro Wireless, RadioRA 2, Homeworks, GRAFIK Eye QS, GRAFIK Systems, Quantum, and CL dimmers.
- A rated lifetime of 50,000 hours @ tc =149 deg F (65 deg C).
- QwikFig compatible. For more information, please refer to the QwikFig User Guide (Lutron P/N 041473) or contact your Lutron sales representative (K and M case only).
- Remote-mount options for United States and Canada.
- NOM certified option for Mexico.
- 100% factory tested
- Continuous, flicker-free dimming from 100% to 1%.
- Guaranteed compatibility with selected Maestro Wireless, RadioRA 2, Homeworks, GRAFIK Eye QS, GRAFIK Systems, Quantum, and CL dimmers.
- A rated lifetime of 50,000 hours @ tc =149 deg F (65 deg C).
- QwikFig compatible. For more information, please refer to the QwikFig User Guide (Lutron P/N 041473) or contact your Lutron sales representative (K and M case only).
- Remote-mount options for United States and Canada.
- NOM certified option for Mexico.
- 100% factory tested
- UPC
- 784276075497
- UNSPSC
- 39112103
- Country of Origin
- MX
- Amperage Rating:
- 1.66 A
- Type:
- LED Driver
- Voltage Rating:
- 20.5 to 24 V
- Wattage:
- 5 to 40 W
- Amperage Rating:
- 1.66 A
- Dimmable:
- Dimmable
- Frequency Rating:
- 50/60 Hz
- Height:
- 1 in
- Input Current:
- .37 A
- Lamp Type:
- LED
- Length:
- NaN in
- Mounting:
- Junction Box
- Operating Temperature:
- 32 to 104 F (0 to 40 C) F
- Power Factor:
- Greater than .90 for loads at 40 W
- Standard:
- UL, RoHS compliant, FCC part 15 compliant for residential applications at 120 VAC, Type TL rated
- Sub Brand:
- Hi-lume 1%
- Type:
- LED Driver
- Voltage Rating:
- 20.5 to 24 V
- Wattage:
- 5 to 40 W
- Width:
- 3 in
UL listed Hi-Lume A-Series driver, forward phase, 24 V, provides continuous flicker-free dimming for constant current or voltage LED sources
manufacturer discounts
learn about discounts
- $90.35 for $200.00+
- $86.88 for $500.00+
- $83.40 for $1,000.00+
$97.30 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders