Products
$174.82 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical o...
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40–194°F (-40–90°C).The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV.Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications.Important: Use insulation jacket or connector O.D. for final ordering criteria.* Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be usedas primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length: 5.625Point of Purchase packaging designated by P. Example: 8423-6P
Add insulation to your direct buried or submersible dig-in repairs and secondary splices with this 3...150
Add insulation to your direct buried or submersible dig-in repairs and secondary splices with this 3M™ 8420 Cold Shrink Connector Insulator. Moisture is never an issue because the rubber insulator features a tight-fitting seal. It's crafted for use on cable splices and solid dielectric insulated wires and is a great choice for a layer of physical protection on air-insulated high-voltage lugs and connectors. ANSI Certified and RoHS 2011/65/EU Compliant, this cold shrink insulator sustains impressive pressure and resiliency for added reliability and peace of mind.
- Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
- Simple installation which requires no tools
- Sealing of terminal lug barrels, conduit couplings and conduit-to-cable breakouts
- Made of black EPDM rubber
- Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
- Simple installation which requires no tools
- Sealing of terminal lug barrels, conduit couplings and conduit-to-cable breakouts
- Made of black EPDM rubber
- UPC
- 054007428657
- UNSPSC
- 39121721
- Country of Origin
- USA
- Material:
- Aluminum; Copper
- Size:
- 1 AWG; 1/0 AWG; 10 AWG; 2 AWG; 4 AWG; 6 AWG; 8 AWG
- Type:
- Cold Shrink Splice
- Voltage Rating:
- 1k V
- Cable Type:
- Power Cable
- Material:
- Aluminum; Copper
- Number of Conductors:
- 1
- Shielding Type:
- Non-Shielded; Tape Shield; UniShield(R); Wire Shield
- Size:
- 1 AWG; 1/0 AWG; 10 AWG; 2 AWG; 4 AWG; 6 AWG; 8 AWG
- Type:
- Cold Shrink Splice
- Voltage Rating:
- 1k V
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and eas...
$174.82 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$558.33 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink Quick Insulator QI Series are open-ended tubular rubber sleeves with sealing mastic on each end that are factory expanded and assembled onto a removable core. The core is removed by pulling from one end after the QI insulator has been positioned over an inline connector, allowing the ends of the tube to shrink and form a water-resistant seal. Sizing of the core and tube, along with the sealing mastic on each end, provides a broader application range without degrading the seal and...
3M™ Cold Shrink Quick Insulator QI Series are open-ended tubular rubber sleeves with sealing mastic on each end that are factory expanded and assembled onto a removable core. The core is removed by pulling from one end after the QI insulator has been positioned over an inline connector, allowing the ends of the tube to shrink and form a water-resistant seal. Sizing of the core and tube, along with the sealing mastic on each end, provides a broader application range without degrading the seal and insulating characteristics of the EPDM rubber tube. Five diameter sizes will cover a range of 1 kV or less cable from 8 AWG–3000 kcmil, copper and aluminum conductors with crimped connectors.
150
- Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
- Simple installation which requires no tools
- Offers excellent wet electrical properties and resists water, acids and alkalis
- Made of EPDM rubber which contains no chlorides or sulfur
- Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
- Simple installation which requires no tools
- Offers excellent wet electrical properties and resists water, acids and alkalis
- Made of EPDM rubber which contains no chlorides or sulfur
- UPC
- 051128595466
- UNSPSC
- 39121721
- Country of Origin
- USA
3M™ Cold Shrink Quick Insulator QI Series are open-ended tubular rubber sleeves with sealing mastic on each end that are factory expanded and assembled onto a removable core. The core is removed by pu...
$558.33 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$565.58 / M
manufacturer discounts
learn about discounts
- $527.88 for $300.00+
- $502.74 for $500.00+
- $481.79 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Wrap-Cap Insulator, Voltage Rating: 600 V Max, Operating Temperature: 75 DEG C, Model Number: 417
IDEAL, Wrap-Cap Insulator, Voltage Rating: 600 V Max, Operating Temperature: 75 DEG C, Model Number: 417
Provide high dielectric and physical protection for UL Listed, non-insulated pressure-type wire conn...150
Provide high dielectric and physical protection for UL Listed, non-insulated pressure-type wire connectorsUnique Design completely covers splice “ insulates both around and between wires and eliminates need for tapeUL Listed to 486C and CSA Certified for 600V maximum building wiring; temperature rated at 75°C (167°F) maximum
- Provide high dielectric and physical protection for UL Listed, non-insulated pressure-type wire connectors
- Unique Design completely covers splice
- Insulates both around and between wires and eliminates need for tape
- UL Listed to 486C and CSA Certified for 600V maximum building wiring; temperature rated at 75°C (167°F) maximum
- Provide high dielectric and physical protection for UL Listed, non-insulated pressure-type wire connectors
- Unique Design completely covers splice
- Insulates both around and between wires and eliminates need for tape
- UL Listed to 486C and CSA Certified for 600V maximum building wiring; temperature rated at 75°C (167°F) maximum
- UPC
- 783250305179
- UNSPSC
- 39121721
- Country of Origin
- USA
- Voltage Rating:
- 600 V
- Operating Temperature:
- 75 DEG C
- Standard:
- CSA C22.2 #188, UL Listed to 486C, RoHS
- Voltage Rating:
- 600 V
IDEAL, Wrap-Cap Insulator, Voltage Rating: 600 V Max, Operating Temperature: 75 DEG C, Model Number: 417
manufacturer discounts
learn about discounts
- $527.88 for $300.00+
- $502.74 for $500.00+
- $481.79 for $1,000.00+
$565.58 / M
In stock (0)
Lead time: over 7 days
may be longer on small orders
$5,674.13 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Each 3M kit includes a cold shrink EPDM rubber sleeve which is factory expanded and placed on a removable plastic core. 1/4 7/8 Cable to 1/4 7/8 Cable.
Each 3M kit includes a cold shrink EPDM rubber sleeve which is factory expanded and placed on a removable plastic core. 1/4 7/8 Cable to 1/4 7/8 Cable.
150
- Reliable seal against water.
- Tough, resilient rubber holds pressure seal, even after exposure.
- Broad application range; can lower inventory costs.
- Eliminates need for heat source or special tools.
- Reliable seal against water.
- Tough, resilient rubber holds pressure seal, even after exposure.
- Broad application range; can lower inventory costs.
- Eliminates need for heat source or special tools.
- UPC
- 054007441205
- UNSPSC
- 39121721
- Country of Origin
- USA
- Shape:
- sleeve
- Size:
- "¹??""–2 ¹??""* to 1 ¹??""–2 ¹??"")"
- Type:
- Sealing Kit
- Shape:
- sleeve
- Size:
- "¹??""–2 ¹??""* to 1 ¹??""–2 ¹??"")"
- Type:
- Sealing Kit
Each 3M kit includes a cold shrink EPDM rubber sleeve which is factory expanded and placed on a removable plastic core. 1/4 7/8 Cable to 1/4 7/8 Cable.
$5,674.13 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$4,490.64 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Each 3M kit includes a cold shrink EPDM rubber sleeve which is factory expanded and placed on a removable plastic core. 1/4 7/8 Cable to 1/4 7/8 Cable.
Each 3M kit includes a cold shrink EPDM rubber sleeve which is factory expanded and placed on a removable plastic core. 1/4 7/8 Cable to 1/4 7/8 Cable.
150
- Reliable seal against water.
- Tough, resilient rubber holds pressure seal, even after exposure.
- Broad application range; can lower inventory costs.
- Eliminates need for heat source or special tools.
- Reliable seal against water.
- Tough, resilient rubber holds pressure seal, even after exposure.
- Broad application range; can lower inventory costs.
- Eliminates need for heat source or special tools.
- UPC
- 054007441212
- UNSPSC
- 39121721
- Country of Origin
- USA
- Shape:
- sleeve
- Size:
- 1/4” - 7/8”
- Type:
- Sealing Kit
- Shape:
- sleeve
- Size:
- 1/4” - 7/8”
- Type:
- Sealing Kit
Each 3M kit includes a cold shrink EPDM rubber sleeve which is factory expanded and placed on a removable plastic core. 1/4 7/8 Cable to 1/4 7/8 Cable.
$4,490.64 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$51.31 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink Quick Insulator QI Series are open-ended tubular rubber sleeves with sealing mastic on each end that are factory expanded and assembled onto a removable core. The core is removed by pulling from one end after the QI insulator has been positioned over an inline connector, allowing the ends of the tube to shrink and form a water-resistant seal. Sizing of the core and tube, along with the sealing mastic on each end, provides a broader application range without degrading the seal and...
3M™ Cold Shrink Quick Insulator QI Series are open-ended tubular rubber sleeves with sealing mastic on each end that are factory expanded and assembled onto a removable core. The core is removed by pulling from one end after the QI insulator has been positioned over an inline connector, allowing the ends of the tube to shrink and form a water-resistant seal. Sizing of the core and tube, along with the sealing mastic on each end, provides a broader application range without degrading the seal and insulating characteristics of the EPDM rubber tube. Five diameter sizes will cover a range of 1 kV or less cable from 8 AWG–3000 kcmil, copper and aluminum conductors with crimped connectors.
150
- Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
- Simple installation which requires no tools
- Offers excellent wet electrical properties and resists water, acids and alkalis
- Made of EPDM rubber which contains no chlorides or sulfur
- Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
- Simple installation which requires no tools
- Offers excellent wet electrical properties and resists water, acids and alkalis
- Made of EPDM rubber which contains no chlorides or sulfur
- UPC
- 051128601471
- UNSPSC
- 39121721
- Country of Origin
- USA
3M™ Cold Shrink Quick Insulator QI Series are open-ended tubular rubber sleeves with sealing mastic on each end that are factory expanded and assembled onto a removable core. The core is removed by pu...
$51.31 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$45.88 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
25" Secondary Rack w/3-B355 Spool Insulators 8" Spacing
25" Secondary Rack w/3-B355 Spool Insulators 8" Spacing
- UPC
- 698397051127
- UNSPSC
- 39121721
- Country of Origin
- CHN
25" Secondary Rack w/3-B355 Spool Insulators 8" Spacing
$45.88 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders