Our 3M™ Fire Barrier Plastic Pipe Device is designed for 6" non-metallic pipe in new and retrofit through penetration installations. This one-piece metal collar assembly is designed to fit smoothly around the pipe with no assembly required, and provides anchor tabs for stability. It is firestop tested up to 2 hours in tested and listed systems.

Our 3M™ Fire Barrier Plastic Pipe Device is designed for 6" non-metallic pipe in new and retrofit through penetration installations. This one-piece metal collar assembly is designed to fit smoothly around the pipe with no assembly required, and provides anchor tabs for stability. It is firestop tested up to 2 hours in tested and listed systems. read less

A Quick Fit for Durable Firestop ProtectionIncorporates 3M™ Fire Barrier Wrap Strip FS-195+ and is s...150 read more

A Quick Fit for Durable Firestop ProtectionIncorporates 3M™ Fire Barrier Wrap Strip FS-195+ and is specifically designed to be a firestop for non-metalic, 6 pipe penetrations. This one-piece metal collar is built to fit securely around the firestop wrap strips – no additional assembly is required. Tested for up to 2 hours of fire protection in tested and listed systems, the device holds firestop material in place and helps ensure proper closure during fire. Metal tabs make for fast, easy anchoring to wall or floor slabs with common tools and hardware such as toggle bolts for gypsum or masonry anchors for concrete. (Hardware sold separately.) The result is a permanent, fixed firestop that also contributes to the structural stability of the penetration.Recommended ApplicationsFor installing firestop around 6" non-metallic pipe in new and retrofit through penetration installationsIn conjunction with 3M™ Fire Barrier Wrap Strip FS-195+The Science of Better Fire Protection from 3MSince 1925 when one a lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each 3M adhesive, sealant, protective coating, along with the best ways to use them – including 3M™ Fire Barrier Plastic Pipe Device – to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less

3M™ Fire Barrier Putty Sleeve Kits are designed to help prevent the passage of fire and smoke in new or existing cable penetrations through walls or floors. These kits are tested up to 4 hours for fire-rated through penetration systems (in accordance with ASTM E814). No gasket is required with this product and it allows for both new and retrofit data and telecom cable firestop installations.

3M™ Fire Barrier Putty Sleeve Kits are designed to help prevent the passage of fire and smoke in new or existing cable penetrations through walls or floors. These kits are tested up to 4 hours for fire-rated through penetration systems (in accordance with ASTM E814). No gasket is required with this product and it allows for both new and retrofit data and telecom cable firestop installations. read less

Ready to Install and Prepared to ProtectPrevent the passage of fire and smoke with 3M™ Fire Ba...150 read more

Ready to Install and Prepared to ProtectPrevent the passage of fire and smoke with 3M™ Fire Barrier Putty Sleeve Kits. These fire barrier sleeve kits can protect existing cable penetrations through walls or floors and be used as a one-piece sleeve or the sleeve may be split/hinged for existing cable installations. Tested up to 4 hours for fire-rated through penetration systems in accordance with ASTM E814 (UL 1479), these putty sleeve kits are a ready-to-install kit. This product does not require gaskets and its rolled-out lip on sleeve facilitates smooth cable entry. The sleeves can be easily installed in openings that are either tight to the sleeve or irregular and can accommodate oversized openings (up to a one-inch larger diameter than the 3M™ Fire Barrier Putty Sleeve diameter).Recommended Applications3M™ Fire Barrier Putty Sleeve Kits are suitable for installation in gypsum wallboard and concrete walls or floors and ideal for applications such as: Existing through-penetration openings with cablesFuture cable installations New construction through-penetration openings for power and communication cablesVersatile Kit for an All-in-One Solution3M™ Fire Barrier Putty Sleeve Kits are ideal for high traffic cable penetrations and designed to be used for both new construction and retrofitting. The blank sleeve (0% cable fill) accommodates future cable installation while the two-piece split/hinged design offers easy retrofit installation on existing cables. The brackets and sleeve work in tandem to help prevent slipping during installation so the sleeve will remain in place.Each kit comes complete in a box containing a 3M™ Fire Barrier Putty Sleeve (two-part metallic sleeve with set of two-part metallic flanges), 3M™ Fire Barrier Moldable Putty+, sheet metal screws, drywall screws and two installation identification labels. These kits can be used as a one-piece sleeve or the sleeve may be split/ hinged for existing cable installations. A versatile and economical solution, these putty sleeve kits are able to meet application requirements in such a way that help reduce inventory. Innovative Fire Barrier SolutionWhether used in new construction or renovation projects, 3M™ Fire Barrier Putty Sleeve Kits provide everything you need in one complete kit. An innovative sleeve design delivers both fire and cable protection and helps ensure smooth cable entry and no-slip installations. Rest easy and enjoy the peace of mind that comes from a kit that maintains all the components necessary to meet firestop code for installation of cable and blank applications.  read less

3M™ Fire Barrier Putty Sleeve Kits are designed to help prevent the passage of fire and smoke in new or existing cable penetrations through walls or floors. These kits are tested up to 4 hours for fire-rated through penetration systems (in accordance with ASTM E814). No gasket is required with this product and it allows for both new and retrofit data and telecom cable firestop installations.

3M™ Fire Barrier Putty Sleeve Kits are designed to help prevent the passage of fire and smoke in new or existing cable penetrations through walls or floors. These kits are tested up to 4 hours for fire-rated through penetration systems (in accordance with ASTM E814). No gasket is required with this product and it allows for both new and retrofit data and telecom cable firestop installations. read less

Ready to Install and Prepared to ProtectPrevent the passage of fire and smoke with 3M™ Fire Ba...150 read more

Ready to Install and Prepared to ProtectPrevent the passage of fire and smoke with 3M™ Fire Barrier Putty Sleeve Kits. These fire barrier sleeve kits can protect existing cable penetrations through walls or floors and be used as a one-piece sleeve or the sleeve may be split/hinged for existing cable installations. Tested up to 4 hours for fire-rated through penetration systems in accordance with ASTM E814 (UL 1479), these putty sleeve kits are a ready-to-install kit. This product does not require gaskets and its rolled-out lip on sleeve facilitates smooth cable entry. The sleeves can be easily installed in openings that are either tight to the sleeve or irregular and can accommodate oversized openings (up to a one-inch larger diameter than the 3M™ Fire Barrier Putty Sleeve diameter).Recommended Applications3M™ Fire Barrier Putty Sleeve Kits are suitable for installation in gypsum wallboard and concrete walls or floors and ideal for applications such as: Existing through-penetration openings with cablesFuture cable installations New construction through-penetration openings for power and communication cablesVersatile Kit for an All-in-One Solution3M™ Fire Barrier Putty Sleeve Kits are ideal for high traffic cable penetrations and designed to be used for both new construction and retrofitting. The blank sleeve (0% cable fill) accommodates future cable installation while the two-piece split/hinged design offers easy retrofit installation on existing cables. The brackets and sleeve work in tandem to help prevent slipping during installation so the sleeve will remain in place.Each kit comes complete in a box containing a 3M™ Fire Barrier Putty Sleeve (two-part metallic sleeve with set of two-part metallic flanges), 3M™ Fire Barrier Moldable Putty+, sheet metal screws, drywall screws and two installation identification labels. These kits can be used as a one-piece sleeve or the sleeve may be split/ hinged for existing cable installations. A versatile and economical solution, these putty sleeve kits are able to meet application requirements in such a way that help reduce inventory. Innovative Fire Barrier SolutionWhether used in new construction or renovation projects, 3M™ Fire Barrier Putty Sleeve Kits provide everything you need in one complete kit. An innovative sleeve design delivers both fire and cable protection and helps ensure smooth cable entry and no-slip installations. Rest easy and enjoy the peace of mind that comes from a kit that maintains all the components necessary to meet firestop code for installation of cable and blank applications.  read less

3M™ Fire Barrier Putty Sleeve Kits are designed to help prevent the passage of fire and smoke in new or existing cable penetrations through walls or floors. These kits are tested up to 4 hours for fire-rated through penetration systems (in accordance with ASTM E814). No gasket is required with this product and it allows for both new and retrofit data and telecom cable firestop installations.

3M™ Fire Barrier Putty Sleeve Kits are designed to help prevent the passage of fire and smoke in new or existing cable penetrations through walls or floors. These kits are tested up to 4 hours for fire-rated through penetration systems (in accordance with ASTM E814). No gasket is required with this product and it allows for both new and retrofit data and telecom cable firestop installations. read less

Ready to Install and Prepared to ProtectPrevent the passage of fire and smoke with 3M™ Fire Ba...150 read more

Ready to Install and Prepared to ProtectPrevent the passage of fire and smoke with 3M™ Fire Barrier Putty Sleeve Kits. These fire barrier sleeve kits can protect existing cable penetrations through walls or floors and be used as a one-piece sleeve or the sleeve may be split/hinged for existing cable installations. Tested up to 4 hours for fire-rated through penetration systems in accordance with ASTM E814 (UL 1479), these putty sleeve kits are a ready-to-install kit. This product does not require gaskets and its rolled-out lip on sleeve facilitates smooth cable entry. The sleeves can be easily installed in openings that are either tight to the sleeve or irregular and can accommodate oversized openings (up to a one-inch larger diameter than the 3M™ Fire Barrier Putty Sleeve diameter).Recommended Applications3M™ Fire Barrier Putty Sleeve Kits are suitable for installation in gypsum wallboard and concrete walls or floors and ideal for applications such as: Existing through-penetration openings with cablesFuture cable installations New construction through-penetration openings for power and communication cablesVersatile Kit for an All-in-One Solution3M™ Fire Barrier Putty Sleeve Kits are ideal for high traffic cable penetrations and designed to be used for both new construction and retrofitting. The blank sleeve (0% cable fill) accommodates future cable installation while the two-piece split/hinged design offers easy retrofit installation on existing cables. The brackets and sleeve work in tandem to help prevent slipping during installation so the sleeve will remain in place.Each kit comes complete in a box containing a 3M™ Fire Barrier Putty Sleeve (two-part metallic sleeve with set of two-part metallic flanges), 3M™ Fire Barrier Moldable Putty+, sheet metal screws, drywall screws and two installation identification labels. These kits can be used as a one-piece sleeve or the sleeve may be split/ hinged for existing cable installations. A versatile and economical solution, these putty sleeve kits are able to meet application requirements in such a way that help reduce inventory. Innovative Fire Barrier SolutionWhether used in new construction or renovation projects, 3M™ Fire Barrier Putty Sleeve Kits provide everything you need in one complete kit. An innovative sleeve design delivers both fire and cable protection and helps ensure smooth cable entry and no-slip installations. Rest easy and enjoy the peace of mind that comes from a kit that maintains all the components necessary to meet firestop code for installation of cable and blank applications.  read less