The Scotch-Brite™ Light Deburring Roll is a very fine grade sheet roll ideal for lightweight deburring and finishing on all types of metal. Moderately conformable, the dense web construction offers increased wear resistance and extended use for applications that require a less aggressive cut, such as cleaning and surface finishing.

The Scotch-Brite™ Light Deburring Roll is a very fine grade sheet roll ideal for lightweight deburring and finishing on all types of metal. Moderately conformable, the dense web construction offers increased wear resistance and extended use for applications that require a less aggressive cut, such as cleaning and surface finishing. read less

Conformable, Durable Blending and Burr RemovalMade with very fine grade aluminum oxide mineral, this...150 read more

Conformable, Durable Blending and Burr RemovalMade with very fine grade aluminum oxide mineral, this high-strength open web sheet roll combines conformability with durability and cut—so you can deburr quickly and are left with a great finish. When you need something conformable and in a finer grade than Scotch-Brite™ Light Grinding and Blending Disc to lightly clean, scuff, deburr or finish, the Scotch-Brite™ Light Deburring Disc helps you achieve a smooth, deburred surface without the use of steel wool or wire brushes. In addition to deburring, this versatile product may be used for surface prep or final finishing. Scotch-Brite conformability along with foldable sheets allows access to many hard-to-reach areas. This long-lasting, highly efficient product is also load-resistant to stand up to prolonged use and can help lower your abrasive costs while increasing productivity.Fast Cut and Long LifeAluminum oxide is a popular choice among industrial professionals due to its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Its high cut-rate, hardness, strength, and low heat retention all combine to make aluminum oxide mineral a good choice in grinding applications. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.The Scotch-Brite™ AdvantageScotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite products not only enhance productivity, but also increase operator safety. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part. read less

The Scotch-Brite™ Clean and Strip Disc D1 is well suited for cleaning operations requiring an aggressive cut to remove paint, sealant, rust or other coatings. We gave it a built-in 1/4? spindle for easy attachment to a die grinder or other portable tool.

The Scotch-Brite™ Clean and Strip Disc D1 is well suited for cleaning operations requiring an aggressive cut to remove paint, sealant, rust or other coatings. We gave it a built-in 1/4? spindle for easy attachment to a die grinder or other portable tool. read less

Clean and Finish in One StepThe Scotch-Brite™ Clean and Strip Disc D1 cleans surfaces quickly and ef...150 read more

Clean and Finish in One StepThe Scotch-Brite™ Clean and Strip Disc D1 cleans surfaces quickly and efficiently, and is an excellent alternative to wire brushes, without leaving wire splinters behind. Extra coarse grade silicon carbide embedded in resin-covered fibers not only removes rust and coatings quickly, but also leaves a satisfactory finish and may eliminate the need for subsequent finishing steps. The open web construction resists loading for long-lasting usefulness, and helps reduce smearing.Silicon Carbide Abrasive Combines Aggressive Cut with a Fine FinishSilicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a finer finish.The Scotch-Brite™ AdvantageNonwoven technology makes Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, limiting clogging of the abrasive. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, cut performance, and service life. Scotch-Brite products may enhance productivity while reducing the need for cleaning chemicals and wire brushes. From aesthetic finishing to weld blending, deburring and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part. read less

3M™ Roloc™ Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.

3M™ Roloc™ Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications. read less

3M™ Roloc™ Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F...150 read more

3M™ Roloc™ Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.3M™ Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M™ Roloc™ Disc 777F products feature aluminum oxide mineral blended with 3M™ Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.3M™ Roloc™ Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system. read less

Scotch-Brite™ Roloc™ Bristle Disc, using proprietary ceramic abrasive grain blended with aluminum oxide and molded, flexible bristles, provide more surface contact than wire brushes and retain abrasive properties throughout the life of the disc.

Scotch-Brite™ Roloc™ Bristle Disc, using proprietary ceramic abrasive grain blended with aluminum oxide and molded, flexible bristles, provide more surface contact than wire brushes and retain abrasive properties throughout the life of the disc. read less

These fast-running discs combine superior cutting action with the 3M™ Roloc™ quick change attachment...150 read more

These fast-running discs combine superior cutting action with the 3M™ Roloc™ quick change attachment system to help you efficiently clean, strip, deburr, blend, finish, polish, scratch, and remove rust and coatings without damaging the base material. Under normal use, bristles remain safely in place and can achieve the desired finish using light pressure. Scotch-Brite™ Roloc™ Bristle Discs work well on steel, aluminum and a variety of other metals, in general maintenance, as well as automotive and engine rebuilding applications.3M™ Ceramic Abrasive Grain is a ceramic mineral manufactured using our proprietary process to enhance toughness and hardness of the grain. For increased performance, Scotch-Brite™ Bristle Discs feature aluminum oxide blended with ceramic abrasive grain for one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. 3M™ Ceramic Abrasive Grain surpasses aluminum oxide abrasives in cut-rate, durability, and makes an excellent choice for industrial grinding and finishing applications.Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that gives you consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. read less

Convenient introductory pack contains a variety of grades of Roloc™ Bristle Discs 3 inch diameter x 5/8 inch trim with a disc pad holder for superior cleaning and coating removal applications.

Convenient introductory pack contains a variety of grades of Roloc™ Bristle Discs 3 inch diameter x 5/8 inch trim with a disc pad holder for superior cleaning and coating removal applications. read less

Easily Remove Rust, Welds and ContaminantsThe bristle discs included in 3M™ Roloc™ Bristle Disc Kit...150 read more

Easily Remove Rust, Welds and ContaminantsThe bristle discs included in 3M™ Roloc™ Bristle Disc Kit 983BS are ideal for more specialized jobs like removing paint, stains, adhesives, weld burn, rust and other contaminants from the workpiece. Pairing them with 3M™ Disc Sanders for a right angle system can help make your tough jobs easy.These fast-running discs combine superior cutting action with the 3M™ Roloc™ quick change attachment system to help you efficiently clean, strip, deburr, blend, finish, polish, scratch and remove rust and coatings without damaging the geometry of the base material. Under normal use, bristles remain safely in place and can achieve the desired finish using light pressure. Bristle discs work well on steel, aluminum and a variety of other metals, in general maintenance, as well as automotive and engine rebuilding applications.Using proprietary ceramic abrasive grain blended with aluminum oxide and molded, flexible bristles, these bristle discs provide large surface contact and retain abrasive properties throughout the life of the disc.3M™ Ceramic Abrasive Grain Cuts Fast and Handles Heat3M™ Ceramic Abrasive Grain is a ceramic mineral manufactured using a proprietary process to enhance toughness and hardness of the grain. For increased performance, these bristle discs feature aluminum oxide blended with ceramic abrasive grain for one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. 3M™ Ceramic Abrasive Grain surpasses aluminum oxide abrasives in cut-rate and durability, and makes an excellent choice for industrial grinding and finishing applications.A Versatile PackThe 3M™ Roloc™ Bristle Disc Kit 983BS contains 3 bristle discs in three grades: 50, 80 and 120. Finer grades are recommended for light-duty applications, like finishing and polishing, and coarser grades are recommended for heavy-duty applications like grinding and deburring. A 3 3M™ Roloc™ TR Disc Pad Holder is also included in the pack. The disc pad optimizes performance of the bristle disc by providing a secure attachment for all applications. Plus, it saves time by eliminating the need to align edges of the disc with the disc pad – the screw aligns the disc, making disc changes quick and easy. The versatile system works with drills, disc sanders, right angle grinders and rotary sanders.3M™ Roloc™ Bristle Disc Kit 983BS, filled with a range of discs and the accompanying disc pad, is great for users who want to try a variety of grades and uncover the right disc for their specific applications. read less

3M™ Roloc™ Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.

3M™ Roloc™ Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications. read less

3M™ Roloc™ Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F...150 read more

3M™ Roloc™ Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.3M™ Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M™ Roloc™ Disc 777F products feature aluminum oxide mineral blended with 3M™ Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.3M™ Roloc™ Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system. read less

Scotch-Brite™ Roloc™ SE Surface Conditioning Disc combines a coarse, non-woven disc to perform heavy-duty deburring and finishing with the efficiency of the 3M™ Roloc™ quick-change attachment system. Our heavy-duty non-woven fiber construction conforms well to help preserve irregular or contoured surfaces and our Roloc™ backing supports the disc to allow for aggressive cutting.

Scotch-Brite™ Roloc™ SE Surface Conditioning Disc combines a coarse, non-woven disc to perform heavy-duty deburring and finishing with the efficiency of the 3M™ Roloc™ quick-change attachment system. Our heavy-duty non-woven fiber construction conforms well to help preserve irregular or contoured surfaces and our Roloc™ backing supports the disc to allow for aggressive cutting. read less

The open-web fiber runs cool and resists loading while the aluminum oxide abrasives provide a high c...150 read more

The open-web fiber runs cool and resists loading while the aluminum oxide abrasives provide a high cut-rate for consistent finishing. The 3M™ Roloc™ attachment system gives you quick and easy disc change-out, making the SE Roloc disc ideal for heavy duty deburring and finishing.SE surface conditioning discs use aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.3M™ Roloc™ TR, TS, and TSM quick change discs are smaller discs that easily and quickly attach onto a Roloc™ disc pad (sold separately) so that you can conveniently change discs from job to job or in multi-step finishing processes. The 3M™ Roloc™ Quick Change Attachment System provides a secure attachment even for heavy-duty applications, and the variety of available Roloc discs allows swapping from one application to the next in seconds. Each disc is also color-coded to identify its grade, making it easy to grab the grade required for different applications.Scotch-Brite™ surface conditioning products were developed with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool, reducing the risk of part discoloration and warping. The fibers are load resistant and keep the abrasive minerals cutting at high performance by limiting clogging of the fibers, which also extends the life of the disc. read less

Scotch-Brite™ EXL Unitized Wheels feature a soft, conformable consistency that effectively smooths, deburrs and finishes the edges of metal alloys, as well as many plastics and composites. There are a variety of densities and grades starting from a very soft 2 density for applications requiring conformability to a hard, aggressive 8 density for maximum cut and durability.

Scotch-Brite™ EXL Unitized Wheels feature a soft, conformable consistency that effectively smooths, deburrs and finishes the edges of metal alloys, as well as many plastics and composites. There are a variety of densities and grades starting from a very soft 2 density for applications requiring conformability to a hard, aggressive 8 density for maximum cut and durability. read less

Consistent Performance on a Variety of SubstratesScotch-Brite™ EXL Unitized Wheel gives a clean edge...150 read more

Consistent Performance on a Variety of SubstratesScotch-Brite™ EXL Unitized Wheel gives a clean edge without smearing, reducing the need for additional clean up and preparation. Designed for optimal performance on a die grinder, the EXL Unitized Wheel minimizes heat buildup during operation, making it ideal for use on heat sensitive materials.Scotch-Brite™ EXL Unitized Wheel is filled with abrasive minerals to quickly smooth edges of metal, plastic and composites. It is available with aluminum oxide in fine, medium, coarse and extra coarse grades, and silicon carbide in very fine and fine grades.Ideal for Robotic DeburringWith a wide range of conformability options and high consistency, long-lasting Scotch-Brite™ industrial abrasives are a great option for robotic deburring. Scotch-Brite™ EXL Unitized Wheel quickly removes burrs and sharp edges in end-of-arm tooling operations, delivering consistent performance through the full life of the abrasive.Scotch-Brite™ offers unique surface conditioning products with abrasives incorporated into nonwoven nylon fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results over the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibers. read less