$116.08 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Motor Lead Inline Splicing Kits 5311-5314 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splice’s main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.
3M™ Motor Lead Inline Splicing Kits 5311-5314 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splice’s main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.
3M™ 5300 Series Motor Lead Inline Splice Kit contains 3 adapter sleeves, an inline splice cover, a s...150
3M™ 5300 Series Motor Lead Inline Splice Kit contains 3 adapter sleeves, an inline splice cover, a silicone grease tube and an instruction sheet. It is designed for use with copper compression, 1 or 2 hole lugs. Its slip on splice cover has durable EPDM rubber construction while the mastic strips in the kit seal moisture. After being crimped onto the cables, use this kit to insulate and seal the lugs that are bolted together in an inline configuration. CSA Certified and RoHS 2011/65/EU Compliant?.
- Designed for use with copper compression, 1 or 2 hole lugs
- Has a durable EPDM rubber construction
- Designed for use with copper compression, 1 or 2 hole lugs
- Has a durable EPDM rubber construction
- UPC
- 054007122685
- UNSPSC
- 39121718
- Country of Origin
- USA
- Color:
- Black
- Type:
- Motor Lead Pigtail Splice
- Voltage Rating:
- 0 to 1,000 V
- Color:
- Black
- Operating Temperature:
- 90°C
- Type:
- Motor Lead Pigtail Splice
- Voltage Rating:
- 0 to 1,000 V
CPT-3-1/2-3M
$585.21 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 2.90 in Yes |
Connector Maximum Installed Length | 13.50 in Yes |
Connector Maximum Outside Diameter | 6.00 in Yes |
5513A-3/0-CU
$651.20 /ea
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
Attributed Data | Included |
---|
CPT-3/4-3M
$326.36 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 0.66 in Yes |
Connector Maximum Installed Length | 4.80 in Yes |
Connector Maximum Outside Diameter | 1.90 in Yes |
Product Image | |||
---|---|---|---|
CPT-3-1/2-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$585.21 / EA
|
5513A-3/0-CU
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design...
$651.20 / EA
|
CPT-3/4-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$326.36 / EA
|
|
Attributed Data | |||
Cable Minimum Outside Diameter | 0.66 in 0.66 in | 2.90 in 2.90 in | |
Connector Maximum Installed Length | 4.80 in 4.80 in | 13.50 in 13.50 in | |
Connector Maximum Outside Diameter | 1.90 in 1.90 in | 6.00 in 6.00 in | |
Add a product to the cart | Show more details | Show more details | Show more details |