$764.40 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design.
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design.
The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbe...150
The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Each splice is high-voltage production tested to ensure reliability. Kits can be ordered with connectors packed in the kit or the kit and connector can be ordered as separate items. Meets requirements of IEEE 404.Each kit makes one splice.Note: 5456A-WG, 5457A-WG and 5458A-WG are partially jacketed splices containing built-in bleeder wires. Additional end user materials are required to convert to full jacketing.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
- Inline splice for joining jacketed concentric neutral (JCN) and concentric neutral (CN) power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, size transition splicing, direct burial installations, submerged locations and use with standard inline crimp connectors
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Inline splice for joining jacketed concentric neutral (JCN) and concentric neutral (CN) power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, size transition splicing, direct burial installations, submerged locations and use with standard inline crimp connectors
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- UPC
- 054007444046
- UNSPSC
- 26121649
- Country of Origin
- USA
- Type:
- Inline
- Voltage Rating:
- 15,000 V
- Cable Type:
- Concentric Neutral (CN); Jacketed Concentric Neutral (JCN)
- Conductor Material:
- Copper
- Conductor Size:
- 500 kcmil
- Connector:
- 10014
- Insulation OD Range:
- 1.08 - 1.70 Inch
- Number of Conductors:
- 1
- Product Technology:
- Cold Shrink
- Type:
- Inline
- Voltage Rating:
- 15,000 V
5535A-1/0-CU
$1,274.94 /ea
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A Series are inline splices for joining 35 kV tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties.
| Attributed Data | Included |
|---|---|
| Cable Type | Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield Yes |
| Conductor Material | Copper Yes |
| Conductor Size | 1/0 AWG Yes |
| Connector | 10005 Yes |
| Product Technology | Cold Shrink Yes |
5411A-CI-1/0
$102.70 /ea
3M™ 5411/5412 Series Molded Rubber QS II Splice Kit is a 1 piece inline splice designed to use on 15kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. The cold shrink jacket has peroxide cured EPDM rubber construction to ensure moisture resistance and durability.
| Attributed Data | Included |
|---|---|
| Cable Type | Concentric Neutral (CN); Jacketed Concentric Neutral (JCN) Yes |
| Connector | CI-1/0 Yes |
| Insulation OD Range | 0.775 - 0.90 Inch Yes |
| Product Technology | Molded Rubber Yes |
| Stranded Conductor Sizes | 1/0 AWG (220 mil) Yes |
| Type | Inline Yes |
5514A-4/0-AL
$651.20 /ea
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
| Attributed Data | Included |
|---|---|
| Cable Type | Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield Yes |
| Conductor Material | Aluminum; Copper Yes |
| Conductor Size | 4/0 AWG Yes |
| Connector | 20008 Yes |
| Product Technology | Cold Shrink Yes |
| Type | Inline Yes |
| Product Image |
|
|
|
|---|---|---|---|
|
5535A-1/0-CU
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A Series are inline splices for joining 35 kV tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. The cold shrink splice body is a one-pi...
$1,274.94 / EA
|
5411A-CI-1/0
3M™ 5411/5412 Series Molded Rubber QS II Splice Kit is a 1 piece inline splice designed to use on 15kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. The cold shrink jacket has peroxide cured EPDM rubber construction to ensure m...
$102.70 / EA
|
5514A-4/0-AL
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design...
$651.20 / EA
|
|
| Attributed Data | |||
| Cable Type | Concentric Neutral (CN); Jacketed Concentric Neutral (JCN) Concentric Neutral (CN); Jacketed Concentric Neutral (JCN) | Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield | |
| Conductor Material | Aluminum; Copper Aluminum; Copper | Copper Copper | |
| Conductor Size | 1/0 AWG 1/0 AWG | 4/0 AWG 4/0 AWG | |
| Connector | 10005 10005 | 20008 20008 | CI-1/0 CI-1/0 |
| Insulation OD Range | 0.775 - 0.90 Inch 0.775 - 0.90 Inch | ||
| Number of Conductors | 1 1 | ||
| Product Technology | Cold Shrink Cold Shrink | Molded Rubber Molded Rubber | |
| Stranded Conductor Sizes | 1/0 AWG (220 mil) 1/0 AWG (220 mil) | ||
| Type | Inline Inline | ||
| Voltage Rating | 15,000 V 15,000 V | 35,000 V 35,000 V | |
| Add a product to the cart | Show more details | Show more details | Show more details |
Recently Viewed
-
VPAS75120ACRE
APPLETON ELECTRIC CO
Explosionproof Strobe Light Fixture, Type Strobe Light, Constructional Feature Corrosion Resistant, Operating Voltage 120 VAC, Lamp Type Octal Socket...
See more details -
5418A-500-CU
3M
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral...
See more details