$1,263.97 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5750 Series Cold Shrink Resin Splice Kit with flame retardant compound 2131 is designed for non shielded, armored or non armored solid dielectric cables. This kit is suitable for use with cable trays, junction boxes, weather exposed, aerial and wet or dry locations. This kit is used with 10000 and 20000 Series aluminum or copper inline compression connectors.
3M™ 5750 Series Cold Shrink Resin Splice Kit with flame retardant compound 2131 is designed for non shielded, armored or non armored solid dielectric cables. This kit is suitable for use with cable trays, junction boxes, weather exposed, aerial and wet or dry locations. This kit is used with 10000 and 20000 Series aluminum or copper inline compression connectors.
3M™ 5750 Series Cold Shrink Resin Splice Kit includes cable repair spacer webs, cold shrink insulato...150
3M™ 5750 Series Cold Shrink Resin Splice Kit includes cable repair spacer webs, cold shrink insulator assemblies, electrical semi conducting tape 13, Scotch® linerless rubber splicing tape 130C and more. The kit uses a flame retardant compound 2131 for replacing cable armor and/or jackets and insulators for electrical insulation. It is rated for 1 to 5 kV rated applications. The semi flexible resin jacket offers resistance to abrasion and moisture. This kit is perfect for inline splicing and is used with solid dielectric cables. RoHS 2011/65/EU Compliant? and MSHA Approved.
- Flame-retardant resin 2131 is used as an insulating material for cable splices
- Perfect for use with non-shielded, solid dielectric cables and indoor/outdoor applications
- 1 kV-rated for multiple and 5 kV-rated for single-cable applications
- MSHA Approved and RoHS 2011/65/EU Compliant?
- Flame-retardant resin 2131 is used as an insulating material for cable splices
- Perfect for use with non-shielded, solid dielectric cables and indoor/outdoor applications
- 1 kV-rated for multiple and 5 kV-rated for single-cable applications
- MSHA Approved and RoHS 2011/65/EU Compliant?
- UPC
- 051128591680
- UNSPSC
- 39121718
- Country of Origin
- USA
CPT-3-1/2-3M
$585.21 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 2.90 in Yes |
Connector Maximum Installed Length | 13.50 in Yes |
Connector Maximum Outside Diameter | 6.00 in Yes |
5513A-3/0-CU
$651.20 /ea
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
Attributed Data | Included |
---|
CPT-3/4-3M
$326.36 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 0.66 in Yes |
Connector Maximum Installed Length | 4.80 in Yes |
Connector Maximum Outside Diameter | 1.90 in Yes |
Product Image | |||
---|---|---|---|
CPT-3-1/2-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$585.21 / EA
|
5513A-3/0-CU
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design...
$651.20 / EA
|
CPT-3/4-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$326.36 / EA
|
|
Attributed Data | |||
Cable Minimum Outside Diameter | 0.66 in 0.66 in | 2.90 in 2.90 in | |
Connector Maximum Installed Length | 4.80 in 4.80 in | 13.50 in 13.50 in | |
Connector Maximum Outside Diameter | 1.90 in 1.90 in | 6.00 in 6.00 in | |
Add a product to the cart | Show more details | Show more details | Show more details |