Similar item
5536A-1000-CU
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A Series are inline splices for joining 35 kV tape shield, wire shiel...
$2,093.51 / EA
Available to order
We can cross-reference SKUs, confirm availability, and help source hard-to-find electrical supplies.
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
SKU: 5798A-MT
MPN: 5798A-MT
The 3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Splice Kits 5797A-MT and 5798A-MT Series are designed for splicing 3/C, armored and nonarmored, shielded power cables. The kits are rated for use on 35 kV cables with conductor sizes from 1/0 AWG-1000 kcmil (60-500 mm²).
The 3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Splice Kits 5797A-MT and 5798A-MT Series are designed for splicing 3/C, armored and nonarmored, shielded power cables. The kits are rated for use on 35 kV cables with conductor sizes from 1/0 AWG-1000 kcmil (60-500 mm²).
The kits are designed to be used with 3M™ Scotchlok™ Connectors 10000 and 20000 Series or other UL listed inline compression connectors that fit withi...
The kits are designed to be used with 3M™ Scotchlok™ Connectors 10000 and 20000 Series or other UL listed inline compression connectors that fit within the dimension limits listed in the Connector Dimensional Requirements Table on the data sheet. The splice utilizes several technologies to accommodate the various functions of a 3/C shielded power cable: 3M™ Cold Shrink QS-III Splice Bodies, Scotch® Tapes for moisture sealing, Constant Force Springs for connecting ground braid jumpers and Armorcast for replacing the cable armor and/or jacket. The completed splice is designed for use in cable trays, weather exposed or direct burial locations. Meets the requirements of IEEE 404.Connectors are not included in the kit and must be ordered separately.Note: When making a trifurcating splice, the 3M™ Cold Shrink MT-E Trifurcating Accessory Kit must be used along with the splice kit.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Do you have a question about 5798A-MT?
Compare alternates in this category before ordering.
Similar item
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A Series are inline splices for joining 35 kV tape shield, wire shiel...
$2,093.51 / EA
Available to order
Similar item
The 3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5450 Series kits are one-piece inline splices designed for use on 25/28 kV CN an...
$186.30 / EA
Available to order
Similar item
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentr...
$690.73 / EA
Available to order
Similar item
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentr...
$880.77 / EA
Available to order
Similar item
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentr...
$938.05 / EA
Available to order
Similar item
3M™ 5467A Series Cold Shrink QS III Splice Kit is an inline splice designed to join 35kV jacketed concentric neutral (JCN) and concentric ne...
$1,062.23 / EA
Available to order
Scan the attributes that differ across these alternatives.
$2,093.51 / EA
$186.30 / EA
$690.73 / EA
$880.77 / EA
$938.05 / EA
$1,062.23 / EA
We use cookies that are essential to run this site, and optional analytics cookies to understand how it is used. See our Privacy Policy for details. You can change your choice at any time via "Your Privacy Choices" in the footer.