$256.69 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe instal...150
3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe installation tool, silicone lubricant, cold shrink jacketing tube, mastic strips, ground braid assembly, constant force spring and CC 3 cable cleaning pads. This kit is rated for 5 to 15 kV, 200 amp applications. Meets ANSI/IEEE Standard 386.
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Cold shrink tube seals from the bottom of the elbow to the cable jacket
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Cold shrink tube seals from the bottom of the elbow to the cable jacket
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- UPC
- 054007047681
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 200 A
- Size:
- 1 AWG; 2 AWG
- Type:
- Elbow
- Voltage Rating:
- 15,000 V
- Amperage Rating:
- 200 A
- Insulation:
- 1
- Insulation Diameter Range:
- 0.630-0.820 in
- Size:
- 1 AWG; 2 AWG
- Type:
- Elbow
- Voltage Rating:
- 15,000 V
5811-PC-25
$261.58 /ea
3M™ Industrial Insulated Protective Cap Kit is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing interfaces. The protective cap is used for permanent or temporary installation on bushings, junctions or feed thru devices. This kit is 15 kV voltage rated and 200 amp current rated.
| Attributed Data | Included |
|---|
5810-A-3
$256.69 /ea
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
| Attributed Data | Included |
|---|---|
| Insulation | 100%; 133% Yes |
| Size | 2 AWG Yes |
| Type | Elbow Yes |
5810-B-1
$245.42 /ea
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
| Attributed Data | Included |
|---|---|
| Insulation | 1.33 Yes |
| Size | 1 AWG; 1/0 AWG Yes |
| Type | Elbow Yes |
| Product Image |
|
|
|
|---|---|---|---|
|
5811-PC-25
3M™ Industrial Insulated Protective Cap Kit is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing interfaces. The protective cap is used for permanent or temporary installation on bushings, junctions or feed...
$261.58 / EA
|
5810-A-3
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use...
$256.69 / EA
|
5810-B-1
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use...
$245.42 / EA
|
|
| Attributed Data | |||
| Amperage Rating | 200 A 200 A | ||
| Insulation | 1.33 1.33 | 100%; 133% 100%; 133% | |
| Size | 1 AWG; 1/0 AWG 1 AWG; 1/0 AWG | 2 AWG 2 AWG | |
| Type | Elbow Elbow | ||
| Voltage Rating | 15,000 V 15,000 V | ||
| Add a product to the cart | Show more details | Show more details | Show more details |
Recently Viewed
-
TP9708
PECO FASTENERS & ELECTRICAL SUPPLIES
PECO FASTENERS 1/4 X 4 ROTARY MASONRY BT SOLD PER EACH
See more details -
PC8579
PECO FASTENERS & ELECTRICAL SUPPLIES
PECO FASTENERS 10-12 X 1 PLASTIC ANCH 500 PER JAR
See more details -
DT200-3M
3M
3M™ Fire Barrier Putty Sleeve Kits are designed to help prevent the passage of fire and smoke in new or existing cable penetrations through walls or f...
See more details -
LI533H5
ADVANCE TRANSFORMER
HID, METAL HALIDE LAMP, LAMP WATTAGE: 70 TO 250 W, HX BALLAST CIRCUIT, ANSI CODE: M80/M81/M85, MAXIMUM DISTANCE TO LAMP: 5 TO 30 FT, CASE TEMP: 90 DEG...
See more details -
5810-A-2
3M
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable...
See more details