$123.11 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Heat Shrink Tubing EPS-300 is a dual wall tubing provides the advantage of an integral, adhesive lined construction. This flame retardant tubing with a 3:1 shrink ratio offers insulation for 600V rated applications. The flexible polyolefin construction features an internal layer of thermoplastic adhesive, which offers moisture seal protection in automotive and marine applications.
3M™ Heat Shrink Tubing EPS-300 is a dual wall tubing provides the advantage of an integral, adhesive lined construction. This flame retardant tubing with a 3:1 shrink ratio offers insulation for 600V rated applications. The flexible polyolefin construction features an internal layer of thermoplastic adhesive, which offers moisture seal protection in automotive and marine applications.
3M™ Heat Shrink Tubing EPS-300 is color coded for quick and easy identification of the wire. It prov...150
3M™ Heat Shrink Tubing EPS-300 is color coded for quick and easy identification of the wire. It provides a skintight fit and strain relief protection for electronic components, wire splices, wire bundles and harness breakouts. This flame retardant tubing has a heat shrinkable outer wall that is irradiation cross linked for abrasion resistance and helps to maintain the high flow as well as good adhesion characteristics. When the tubing cools down, it forms a permanent, water resistant barrier. It withstands a wide temperature range of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
- Dual-wall construction provides abrasion resistance and moisture-seal protection
- Offers the advantage of integral, adhesive-lined construction
- Offers protection for automotive, truck, electronic components, wire splices, wire bundles and harness breakouts
- Made of black flexible polyolefin
- Dual-wall construction provides abrasion resistance and moisture-seal protection
- Offers the advantage of integral, adhesive-lined construction
- Offers protection for automotive, truck, electronic components, wire splices, wire bundles and harness breakouts
- Made of black flexible polyolefin
- UPC
- 051128597910
- UNSPSC
- 39121723
- Country of Origin
- USA
- Color:
- Black
- Type:
- Dual Wall (Adhesive Lined)
- Color:
- Black
- Continuous Operating Temperature:
- -67 degrees to 230 degrees
- Dielectric Strength:
- 700 V/mil
- Flammability:
- Self-extinguishing
- Heat Aging:
- Elongation 175%
- Heat Shock:
- No dripping, flowing, cracking
- Inside Diameter:
- 0.08
- Length:
- 48 in
- Low Temperature Flexibility:
- No Cracking
- Minimum Shrink Temperature:
- 176 degrees
- Outside Diameter:
- 0.25 in
- Shrink Ratio:
- 3 to 1
- Standard:
- UL, ABS, CSA
- Thickness:
- 0.04
- Type:
- Dual Wall (Adhesive Lined)
- Volume Resistivity:
- 10(14) ohm/cm
- Water Absorption:
- 0.30%
ITCSN-2000-25'-Black-Reel
$277.64 /ea
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyolefin construction that provides moisture seal protection.
Attributed Data | Included |
---|---|
Color | Black Yes |
Continuous Operating Temperature | 110 degrees - 230 degrees Yes |
Heat Shock | No dripping, flowing, cracking Yes |
Low Temperature Flexibility | No Cracking Yes |
Minimum Shrink Temperature | 250 degrees Yes |
Shrink Ratio | 3 to 1 Yes |
Standard | UL, CSA Yes |
Type | Heavy Wall Yes |
Volume Resistivity | 1 x 10(14) ohm/cm Yes |
Water Absorption | 0.05% Yes |
FP301-1/16-48"-Black-250 Pcs
$224.81 /ea
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications. This tubing has a 2:1 shrink ratio and provides flame retardant insulation for 600V rated applications. It has a flexible polyolefin construction that offers moisture seal protection.
Attributed Data | Included |
---|---|
Color | Black Yes |
Dielectric Strength | 900 Volt Yes |
Shrink Ratio | 2:01 Yes |
Standard | UL Recognized, CSA Certified, ABS, and AMS 3636 & 3637 Yes |
Type | Thin-Wall Flexible Polyolefin Yes |
SKE-25/63-3M
$69.13 /ea
3M™ Heat Shrink End Cap SKE provides mechanical and environmental protection as well as sealing to cable ends. The semi rigid, flame retardant polyolefin construction makes the end cap suitable for heavy duty applications. The adhesive lining forms a permanent, flexible and water resistant barrier.
Attributed Data | Included |
---|---|
Color | Black Yes |
Type | Heat Shrink Heavy-Duty End Cap Yes |
Product Image | |||
---|---|---|---|
ITCSN-2000-25'-Black-Reel
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyolefin...
$277.64 / EA
|
FP301-1/16-48"-Black-250 Pcs
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications. This tubing has a 2:1 shrink ratio and provides fl...
$224.81 / EA
|
SKE-25/63-3M
3M™ Heat Shrink End Cap SKE provides mechanical and environmental protection as well as sealing to cable ends. The semi rigid, flame retardant polyolefin construction makes the end cap suitable for heavy duty applications. The adhesive lining forms a...
$69.13 / EA
|
|
Attributed Data | |||
Color | Black Black | ||
Continuous Operating Temperature | 110 degrees - 230 degrees 110 degrees - 230 degrees | ||
Dielectric Strength | 500 V/mil 500 V/mil | 900 Volt 900 Volt | |
Heat Shock | No dripping, flowing, cracking No dripping, flowing, cracking | ||
Length | 0.63 in 0.63 in | 25 ft 25 ft | 48 in 48 in |
Low Temperature Flexibility | No Cracking No Cracking | ||
Minimum Shrink Temperature | 250 degrees 250 degrees | ||
Outside Diameter | 0.0625 in 0.0625 in | ||
Shrink Ratio | 2:01 2:01 | 3 to 1 3 to 1 | |
Standard | UL, CSA UL, CSA | UL Recognized, CSA Certified, ABS, and AMS 3636 & 3637 UL Recognized, CSA Certified, ABS, and AMS 3636 & 3637 | |
Type | Heat Shrink Heavy-Duty End Cap Heat Shrink Heavy-Duty End Cap | Heavy Wall Heavy Wall | Thin-Wall Flexible Polyolefin Thin-Wall Flexible Polyolefin |
Voltage Rating | 600 V 600 V | ||
Volume Resistivity | 1 x 10(14) ohm/cm 1 x 10(14) ohm/cm | ||
Water Absorption | 0.05% 0.05% | ||
Add a product to the cart | Show more details | Show more details | Show more details |