3M™ Fire Barrier RC-1 Restricting Collar works with our 3M™ Fire Barrier Wrap Strip FS-195+ or Ultra GS firestops for through penetrations in wall, floor and floor/ceiling assemblies. Durable 28-gauge steel collar is easily cut to fit the pipe diameter. The collar secures the firestop and provides tabs for anchoring to walls or floor slabs, helping ensure stability for effective firestops.

3M™ Fire Barrier RC-1 Restricting Collar works with our 3M™ Fire Barrier Wrap Strip FS-195+ or Ultra GS firestops for through penetrations in wall, floor and floor/ceiling assemblies. Durable 28-gauge steel collar is easily cut to fit the pipe diameter. The collar secures the firestop and provides tabs for anchoring to walls or floor slabs, helping ensure stability for effective firestops. read less

A Small but Vital Part of an Effective Firestop SystemWith its small but critical design features, 3...150 read more

A Small but Vital Part of an Effective Firestop SystemWith its small but critical design features, 3M™ Fire Barrier RC-1 Restricting Collar is integral to successful intumescent firestop installation around penetrations in wall, floor and floor/ceiling assemblies. Quite simply, it’s a crucial component for ensuring that elastomeric and hard char firestop material will properly close openings left by burned non-metallic pipes and other penetrations. In fact, the use of such a collar is required for firestopping plastic pipes larger than 4 (101.6 mm) in diameter. The Fire Barrier RC-1 is ideal for use in conjunction with 3M™ Fire Barrier Wrap Strip FS-195+ or 3M™ Fire Barrier Ultra GS firestops.Recommended ApplicationsUL-classified for use on PVC, CPVC, ABS, CCPVC, CCABS, PVDF, PP and PB plastic pipeIn conjunction with 3M™ Fire Barrier Wrap Strip FS-195+In conjunction with 3M™ Fire Barrier Ultra GSThe Basis for Durable FirestopsDurable 28-gauge steel is thin enough for installers to easily unroll and cut to size around the installed firestop. It is quickly secured into place with a hose clamp or steel tie wire. Notches in its outer edge of the RC-1 Restricting Collar form bendable tabs – installers simply bend them into place and use hardware such as masonry fasteners (sold separately) to anchor them to the floor or ceiling slab. The result is a permanent, fixed firestop that also contributes to the structural stability of the penetration.The Science of Better Fire Protection from 3MSince 1925 when a lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each adhesive, sealant, and protective coating, along with the best ways to use them – including 3M™ Fire Barrier RC-1 Restricting Collar – to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less

Engineered to form a monolithic seal after drying, 3M™ Fire Barrier Sealant IC 15WB+ is a yellow, one-part, gun-grade, intumescent firestop sealant that provides up to 3-hour fire protection in tested and listed systems. This helps prevent the spread of fire, smoke and noxious gas, while also acting as an acoustic barrier to help minimize noise transfer.

Engineered to form a monolithic seal after drying, 3M™ Fire Barrier Sealant IC 15WB+ is a yellow, one-part, gun-grade, intumescent firestop sealant that provides up to 3-hour fire protection in tested and listed systems. This helps prevent the spread of fire, smoke and noxious gas, while also acting as an acoustic barrier to help minimize noise transfer. read less

Establish a Strong Firestop Barrier?Designed to prevent the spread of fire, smoke and noxious gas, 3...150 read more

Establish a Strong Firestop Barrier?Designed to prevent the spread of fire, smoke and noxious gas, 3M™ Fire Barrier Sealant IC 15WB+ is a one-part, gun-grade, latex-based, intumescent firestop sealant. This firestop sealant provides up to 3-hour fire protection in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115. In addition, this product is fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079). This sealant has been formulated to form a monolithic firestop seal that also helps minimize sound transfer, acting as a barrier to airborne sound transmission (STC-Rating of 54 when tested in a STC 54-rated wall assembly).Recommended Applications HVAC ducts and vents Metallic and non-metallic, including CPVC pipes Blank openings Single and bundled cables Insulated pipe Pipe and cable through-Penetrations Busways Combos Rated wall, floor and floor-ceiling assemblies Static construction jointsFormulated for Protection and Ready for Inspection3M™ Fire Barrier Sealant IC 15WB+ is formulated to be easily cleaned-up with water. This sealant is paintable, as well as re-enterable and repairable. It is a halogen-free sealant that features exceptional adhesion, excellent caulk rate and sag-resistance. In addition, inspectors can instantly recognize 3M™ Fire Barrier Sealant IC 15WB+ by its distinctive yellow color.3M™ Fire Barrier Sealant IC 15WB+ firestops through penetrations passing through fire-rated floor, floor/ceiling or wall assemblies, as well as other fire-rated interior building partitions and assemblies (e.g. static construction joints or blank openings). In addition, the unique intumescent property of this material allows 3M™ Fire Barrier Sealant IC 15WB+ to expand and help maintain a firestop penetration seal for up to 3 hours of fire exposure. 3M™ Fire Barrier Sealant IC 15WB+ bonds to most construction substrates, including: gypsum wallboard, concrete, metals, wood, plastic and cable jacketing. This sealant meets the intent of LEED® VOC environmental regulations, International Building Code (IBC) and other key life safety building code requirements.Reliable and Affordable Fire ProtectionEffective and easy to install, 3M™ Fire Barrier Sealant IC 15WB+ is part of the 3M family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall perimeter joints and through penetration seals to control the transmission of fire, heat, smoke and noxious gas. This water-based firestop sealer is applied with conventional airless sprayers, dries quickly and cleans up easily.

Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall perimeter joints and through penetration seals to control the transmission of fire, heat, smoke and noxious gas. This water-based firestop sealer is applied with conventional airless sprayers, dries quickly and cleans up easily. read less

Effective Fire Protection in a Flexible, Durable CoatingFormulated for flexibility that stays where...150 read more

Effective Fire Protection in a Flexible, Durable CoatingFormulated for flexibility that stays where it’s sprayed, 3M™ FireDam™ Spray 200 controls the transmission of fire, heat, smoke and noxious gasses before, during and after exposure to fire. It provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079) and up to 2-hour protection for through penetration systems per ASTM E 814 (UL 1479) & CAN/ULC-S115. It also provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307. This firestop coating is Ideal for sealing building joints, penetration seals and perimeter joints between fire-rated floors and fire-rated walls. It also minimizes noise transfer (STC Rating of 56 when tested in a STC 56-rated wall assembly).This elastomeric coating forms a durable, flexible seal with up to +/- 50% compression/extension of nominal joint width without cracking. It resists sag for vertical applications, and displays excellent hiding power which makes it easier for technicians to maintain the proper coating thickness.Recommended Applications Floor to floor joints Perimeter joints (curtain walls) Head-of-wall jointsEasy Spray-On Fire ProtectionThe water-based, easy-cleanup 3M™ FireDam™ Spray 200 is applied using conventional airless sprayers. Applied as a 1/8” (3mm) coating, it dries quickly to a uniform seal in a variety of conditions. It is also freeze and thaw resistant, helping to ensure consistent firestop in a range of conditions during construction. 3M™ FireDam™ Spray 200 is available in a distinct red for easy identification, or a dark gray to match existing surroundings.Reliable and Affordable Fire ProtectionEffective and easy to install, 3M™ FireDam™ Spray 200 is part of 3M's family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

Our 3M™ Fire Barrier Pass-Through Device Foam Plugs are designed for closing 3M™ Fire Barrier Pass-Through Devices which are used in wall and floor through-penetrations. They are simple to use and help reduce sound and smoke transmission. During a fire, this product, used in conjunction with a 3M™ Fire Barrier Pass-Through Device, helps maintain a tight seal against smoke.

Our 3M™ Fire Barrier Pass-Through Device Foam Plugs are designed for closing 3M™ Fire Barrier Pass-Through Devices which are used in wall and floor through-penetrations. They are simple to use and help reduce sound and smoke transmission. During a fire, this product, used in conjunction with a 3M™ Fire Barrier Pass-Through Device, helps maintain a tight seal against smoke. read less

Enhanced Seal for Fire PreventionEngineered to help stop smoke and sound, 3M™ Fire Barrier Pass-Thro...150 read more

Enhanced Seal for Fire PreventionEngineered to help stop smoke and sound, 3M™ Fire Barrier Pass-Through Device Foam Plugs are replacement foam plugs designed for firestop applications in walls and floors. These are re-enterable and reusable. Installation is easy, saving both time and labor.Recommended ApplicationsSeal ends of 3M™ Fire Barrier Pass-Through DevicesReliable and Affordable Fire ProtectionEffective and easy to install, 3M™ Fire Barrier Pass-Through Device Foam Plugs are part of 3M’s family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

Our 3M™ Fire Barrier Pass-Through Device Foam Plugs are designed for closing 3M™ Fire Barrier Pass-Through Devices which are used in wall and floor through-penetrations. They are simple to use and help reduce sound and smoke transmission. During a fire, this product, used in conjunction with a 3M™ Fire Barrier Pass-Through Device, helps maintain a tight seal against smoke.

Our 3M™ Fire Barrier Pass-Through Device Foam Plugs are designed for closing 3M™ Fire Barrier Pass-Through Devices which are used in wall and floor through-penetrations. They are simple to use and help reduce sound and smoke transmission. During a fire, this product, used in conjunction with a 3M™ Fire Barrier Pass-Through Device, helps maintain a tight seal against smoke. read less

Enhanced Seal for Fire PreventionEngineered to help stop smoke and sound, 3M™ Fire Barrier Pass-Thro...150 read more

Enhanced Seal for Fire PreventionEngineered to help stop smoke and sound, 3M™ Fire Barrier Pass-Through Device Foam Plugs are replacement foam plugs designed for firestop applications in walls and floors. These are re-enterable and reusable. Installation is easy, saving both time and labor.Recommended ApplicationsSeal ends of 3M™ Fire Barrier Pass-Through DevicesReliable and Affordable Fire ProtectionEffective and easy to install, 3M™ Fire Barrier Pass-Through Device Foam Plugs are part of 3M’s family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall perimeter joints and through penetration seals to control the transmission of fire, heat, smoke and noxious gas. This water-based firestop sealer is applied with conventional airless sprayers, dries quickly and cleans up easily.

Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall perimeter joints and through penetration seals to control the transmission of fire, heat, smoke and noxious gas. This water-based firestop sealer is applied with conventional airless sprayers, dries quickly and cleans up easily. read less

Effective Fire Protection in a Flexible, Durable CoatingFormulated for flexibility that stays where...150 read more

Effective Fire Protection in a Flexible, Durable CoatingFormulated for flexibility that stays where it’s sprayed, 3M™ FireDam™ Spray 200 controls the transmission of fire, heat, smoke and noxious gasses before, during and after exposure to fire. It provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079) and up to 2-hour protection for through penetration systems per ASTM E 814 (UL 1479) & CAN/ULC-S115. It also provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307. This firestop coating is Ideal for sealing building joints, penetration seals and perimeter joints between fire-rated floors and fire-rated walls. It also minimizes noise transfer (STC Rating of 56 when tested in a STC 56-rated wall assembly).This elastomeric coating forms a durable, flexible seal with up to +/- 50% compression/extension of nominal joint width without cracking. It resists sag for vertical applications, and displays excellent hiding power which makes it easier for technicians to maintain the proper coating thickness.Recommended Applications Floor to floor joints Perimeter joints (curtain walls) Head-of-wall jointsEasy Spray-On Fire ProtectionThe water-based, easy-cleanup 3M™ FireDam™ Spray 200 is applied using conventional airless sprayers. Applied as a 1/8” (3mm) coating, it dries quickly to a uniform seal in a variety of conditions. It is also freeze and thaw resistant, helping to ensure consistent firestop in a range of conditions during construction. 3M™ FireDam™ Spray 200 is available in a distinct red for easy identification, or a dark gray to match existing surroundings.Reliable and Affordable Fire ProtectionEffective and easy to install, 3M™ FireDam™ Spray 200 is part of 3M's family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall perimeter joints and through penetration seals to control the transmission of fire, heat, smoke and noxious gas. This water-based firestop sealer is applied with conventional airless sprayers, dries quickly and cleans up easily.

Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall perimeter joints and through penetration seals to control the transmission of fire, heat, smoke and noxious gas. This water-based firestop sealer is applied with conventional airless sprayers, dries quickly and cleans up easily. read less

Effective Fire Protection in a Flexible, Durable CoatingFormulated for flexibility that stays where...150 read more

Effective Fire Protection in a Flexible, Durable CoatingFormulated for flexibility that stays where it’s sprayed, 3M™ FireDam™ Spray 200 controls the transmission of fire, heat, smoke and noxious gasses before, during and after exposure to fire. It provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079) and up to 2-hour protection for through penetration systems per ASTM E 814 (UL 1479) & CAN/ULC-S115. It also provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307. This firestop coating is Ideal for sealing building joints, penetration seals and perimeter joints between fire-rated floors and fire-rated walls. It also minimizes noise transfer (STC Rating of 56 when tested in a STC 56-rated wall assembly).This elastomeric coating forms a durable, flexible seal with up to +/- 50% compression/extension of nominal joint width without cracking. It resists sag for vertical applications, and displays excellent hiding power which makes it easier for technicians to maintain the proper coating thickness.Recommended Applications Floor to floor joints Perimeter joints (curtain walls) Head-of-wall jointsEasy Spray-On Fire ProtectionThe water-based, easy-cleanup 3M™ FireDam™ Spray 200 is applied using conventional airless sprayers. Applied as a 1/8” (3mm) coating, it dries quickly to a uniform seal in a variety of conditions. It is also freeze and thaw resistant, helping to ensure consistent firestop in a range of conditions during construction. 3M™ FireDam™ Spray 200 is available in a distinct red for easy identification, or a dark gray to match existing surroundings.Reliable and Affordable Fire ProtectionEffective and easy to install, 3M™ FireDam™ Spray 200 is part of 3M's family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

3M™ Fire Barrier Composite Sheet CS-195+ is a lightweight intumescent firestop that combines four components into a single system to help slow the spread of fire, smoke and noxious gases. Sheets combine 28-gauge steel, intumescent material, wire mesh and aluminum foil and are easy to handle and install with common trade tools. They are firestop tested for up to 4 hours of fire protection.

3M™ Fire Barrier Composite Sheet CS-195+ is a lightweight intumescent firestop that combines four components into a single system to help slow the spread of fire, smoke and noxious gases. Sheets combine 28-gauge steel, intumescent material, wire mesh and aluminum foil and are easy to handle and install with common trade tools. They are firestop tested for up to 4 hours of fire protection. read less

Firestopping in Nearly Any Size and ShapeFor larger openings and penetrations where putties and stri...150 read more

Firestopping in Nearly Any Size and ShapeFor larger openings and penetrations where putties and strips alone aren’t enough, 3M™ Fire Barrier Composite Sheet CS-195+ is a one-part firestop system that installers can cut and form to exact sizes – no mixing or damming required. These sheets are easily installed using common tools and fasteners. Ideal for firestopping penetrations such as cable trays and conduit, the sheets feature intumescent material bonded to 28-gauge galvanized steel, reinforced on its facing side with hexagonal wire mesh and covered in aluminum foil. This combination of organic/inorganic materials makes these composite sheets a reliable firestop in tested and listed systems, new and retrofit. These materials also make an excellent thermal conductor, helping to dispel built-up radiant heat to preserve process and control equipment and help minimize cable derating concerns.Recommended Applications Seal penetrations through fire-rated walls and floors Firestop penetrations including cable trays, cable, piping and large blanks Multiple component installations where heat build-up and derating are concerns Shield conduit, HVAC ductwork, panels, valves and vital heat-sensitive process equipment Fire-resistive and smoke seal for any shape opening in concrete block or slabs Protect cable drop-outs, junction boxes and cabinets Intermittent firestop in horizontal and vertical cable tray runs In conjunction with 3M™ Fire Barrier Sealant or Moldable Putty MP+Fully Tested and Approved3M™ Fire Barrier Composite Sheet CS-195+ is firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479).The Science of Better Fire Protection from 3MSince 1925 when a 3M lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each adhesive, sealant, protective coating, device and firestop product including 3M™ Fire Barrier Composite Sheet CS-195+ to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less