Results: 0 products, 0 Pages
Categories Filtering by Manufacturer

GT-16

ADJUSTABLE VOLTAGE DETECTOR
Manufacturer: GREENLEE TEXTRON
GRN GT-16 ADJUSTABLE VOLTAGE DETECT
manufacturer discounts
$500.00 - $24.91 each
$1,000.00 - $23.72 each
$2,000.00 - $22.93 each

$ 28.67 each

2 In stock
Full Description:
Adjustable to safely detect power and low voltage. Safely detects AC voltage without touching the bare conductor. Adjustable for use on power wiring plus lighting, thermostats and other low voltage circuits. Use to detect voltage in outlets, lighting fixtures, wires and cables. Finds breaks in wires. Identifies hot and neutral conductors. Low battery indication. Accessories included: (1) 1.5V AAA battery. Lifetime Limited Warranty.
MPN: 
GT-16
Unspsc Family
Measuring and observing and testing instruments
Unspsc Class
Electrical measuring and testing equipment and accessories
Unspsc Commodity
Circuit tester
Application
Use To Detect Voltage In Outlets, Lighting Fixtures, Wires And Cables
Battery
(1) 1.5 V AAA
Frequency
50 - 500Hz
Measurement Category
CAT IV, 1000V
Standard
C/US UL Listed, CE Listed
Type
Adjustable, Non Contact
Voltage Rating
AC V 5 - 1000
Brand Name
Greenlee
GTIN-14: 
00783310127277
UPC: 
783310127277
UNSPSC: 
41113642
Height: 
0.4000 IN
Width: 
4.8000 IN
Length: 
8.8000 IN
Gross Weight: 
0.210 L
Country of Origin: 
CN
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

430-500

TWINE,SPIRAL WRAP (PKGD)
Manufacturer: GREENLEE TEXTRON
GRN 430-500 TWINE,SPIRAL WRAP (PKGD
manufacturer discounts
$500.00 - $11.45 each
$1,000.00 - $10.91 each
$2,000.00 - $10.54 each

$ 13.18 each

5 In stock
Full Description:
Twine, Spiral Wrap 1 Ply Poly Line 500'. Standard Pack of 6. Ready-to-use, pre-punched hole in lid with resealable cap. Use with power fishing systems directly from the container. Resists tangling when dispensing. Rot and mildew resistant. Handy reusable plastic dispenser pail with handle keeps the line dry. Use to pull rope through conduit.
MPN: 
430-500
Unspsc Family
Hand tools
Unspsc Class
Pulling tools
Unspsc Commodity
Fish tape
Brand Name
Greenlee
Special Features
Ready-to-use, pre-punched hole in lid with resealable capUse with power fishing systems directly from the containerResists tangling when dispensingRot and mildew resistantHandy reusable plastic dispenser pail with handle keeps the line dryUse to pull rope through conduit
Tensile Strength
210.000 LB (934.000 N) Average Breaking Strength
Color
Green
Type
Twine, Spiral Wrap, Tracer
Application
Used to pull rope through conduit. Use with power fishing systems directly from the container
GTIN-14: 
00783310125983
UPC: 
783310125983
UNSPSC: 
27113101
Height: 
8.4000 IN
Width: 
10.9000 IN
Length: 
7.4000 IN
Gross Weight: 
6.550 L
Country of Origin: 
US
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

DTAPKIT

DRILL/TAP KIT
Manufacturer: GREENLEE TEXTRON
GRN DTAPKIT DRILL/TAP KIT
manufacturer discounts
$500.00 - $38.47 each
$1,000.00 - $36.64 each
$2,000.00 - $35.41 each

$ 44.27 each

6 In stock
Full Description:
Combination Drill/Tap Bits. 6 Piece Drill/Tap Set, 6-32 TO 1/4-20. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MPN: 
DTAPKIT
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Threading taps
Brand Name
Greenlee
Material
High speed steel
Application
For mild steel, copper, brass and aluminum
Point Type
Split point with web thinning
Size
6 piece, 6-32 to 1/4-20
Special Features
Complete hole drilling, tapping and deburring/countersinking in one operation using power drill to save time and labor. Back tapered beyond tap to prevent thread damage from over-drilling. Made from hardened high-speed steel versus carbon-steel for longer life. High wuality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10 gauge metal. Quick change adaptor included
GTIN-14: 
00783310176206
UPC: 
783310176206
UNSPSC: 
27112806
Height: 
1.6000 IN
Width: 
9.0000 IN
Length: 
12.7000 IN
Gross Weight: 
0.350 L
Country of Origin: 
CN
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

0453-17C

DRIVER,SCREWHOLDING #1X5"
Manufacturer: GREENLEE TEXTRON
GRN 0453-17C DRIVER,SCREWHOLDING #1
manufacturer discounts
$500.00 - $8.22 each
$1,000.00 - $7.82 each
$2,000.00 - $7.56 each

$ 9.45 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Screw-Holding Screwdriver Phillips Tip #1 x 5". The industry's finest screw-holding device, available for either slotted or Phillips screws. Easily holds screw in place when installing in hard-to-reach locations. Precision tip for accurate fastener fit. Heavy-duty construction for longer life. Soft, cushioned grip for extra comfort and torque. Handle marked for easy identification of screwdriver size and type. Lifetime limited warranty. Note: This is not an insulated tool.
MPN: 
0453-17C
Unspsc Family
Hand tools
Unspsc Class
Wrenches and drivers
Unspsc Commodity
Screwdrivers
Handle Type
Soft, Cushioned Grip
Overall Length
8-5/8 IN (22.000 CM)
Shank Length
5.000 IN
Tip Size
#1
Tip Type
Phillips
Type
Screw Holding, Heavy Duty
Weight
0.100 LB (0.050 KG)
Brand Name
Greenlee
GTIN-14: 
00783310563174
UPC: 
783310563174
UNSPSC: 
27111701
Height: 
1.0000 IN
Width: 
2.5000 IN
Length: 
11.9000 IN
Gross Weight: 
0.180 L
Country of Origin: 
TW
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

60A-1

BIT,AUGER QUICK CHANGE (1A) (POP)
Manufacturer: GREENLEE TEXTRON
GRN 60A-1 BIT,AUGER QUICK CHANGE (1
manufacturer discounts
$500.00 - $10.16 each
$1,000.00 - $9.67 each
$2,000.00 - $9.35 each

$ 11.69 each

2 In stock
Full Description:
Stubby Auger Wood Bit, 1" (25.4 mm). Over center single flute design for cleaner holes and less splintering. Unique cutting edge designfor fast and smooth cutting action. Shorter than the top competitor's bit for better access to tight spaces between studs and joists. Perfect for drilling 2" and 4" joists. Augers have self-feeding screw point that draws bit through all wood types with less operator fatigue. Eliminates the need for special tools such as expensive right angle drills or multiple steps to cut the hole to size. 1/4" hex quick change design for fast and easy use in all drill types. Clearly marked with bit diameter and catalog number on shank for easy identification.
MPN: 
60A-1
Unspsc Family
Hand tools
Unspsc Class
Cutting and crimping and punching tools
Unspsc Commodity
Wood auger bit
Application
For Drilling 2.000 IN And 4.000 IN Joists And Wood
Bit Diameter
1.000 IN (25.400 MM)
Overall Length
4.500 IN (144.000 MM)
Shank Diameter
1/4 IN
Shank Type
Hexagonal
Type
Stubby, Quick Change
Weight
0.400 LB (199.000 GM)
Brand Name
Greenlee
GTIN-14: 
00783310105381
UPC: 
783310105381
UNSPSC: 
27111537
Height: 
1.3000 IN
Width: 
3.5000 IN
Length: 
8.1000 IN
Gross Weight: 
0.320 L
Country of Origin: 
CN
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

12-04-54A

BIT,D'VERSIBIT .750X.250X54.00 "A"
Manufacturer: GREENLEE TEXTRON
GRN 12-04-54A BIT,D'VERSIBIT .750X.

manufacturer discounts
$500.00 - $56.01 each
$1,000.00 - $53.34 each
$2,000.00 - $51.56 each

$ 64.45 each

2 In stock
Full Description:
D'Versibit® Type A Auger Bit. 3/4" (19.1 mm) bit diameter, 54" (1371.6 mm) long with a 1/4" (6.4 mm) shaft diameter. Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval.
MPN: 
12-04-54A
Unspsc Family
Hand tools
Unspsc Class
Cutting and crimping and punching tools
Unspsc Commodity
Wood auger bit
Application
For Drilling In Soft Woods Or Through Thin Sections
Bit Diameter
3/4 IN (19.100 MM)
Color Code
Red
Shaft Diameter
1/4 IN (6.400 MM)
Shaft Length
54.000 IN (1371.600 MM)
Sub Brand
D'VersiBIT®
Type
Type A
Brand Name
Greenlee
GTIN-14: 
00783310380832
UPC: 
783310380832
UNSPSC: 
27111537
Height: 
1.2500 IN
Width: 
2.5000 IN
Length: 
60.0000 IN
Gross Weight: 
1.050 L
Country of Origin: 
US
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

62PTS-7/8

BIT,NAILEATER 7/8(.875) X 7.62(62PT-7/8)
Manufacturer: GREENLEE TEXTRON
GRN 62PTS-7/8 BIT,NAILEATER 7/8(.87

manufacturer discounts
$500.00 - $26.54 each
$1,000.00 - $25.27 each
$2,000.00 - $24.43 each

$ 30.54 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Nail Eater® Extreme 7/8" hole diameter. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s. P.O.P packaged.
MPN: 
62PTS-7/8
Unspsc Family
Hand tools
Unspsc Class
Cutting and crimping and punching tools
Unspsc Commodity
Wood auger bit
Bit Diameter
7/8 IN (22.200 MM)
Electric Drill Required
61 PTS - 5/8 Through 61 PTS -1, Minimum 3/8 IN Drill, All Big Shank, 1/2 IN Drill
Material
Heat Treated Steel
Overall Length
7-5/8 IN (193.700 MM)
Shank Diameter
7/16 IN (11.100 MM)
Shank Type
Hexagonal
Sub Brand
Nail Eater
Twist Length
5.000 IN (127.000 MM)
Type
Extreme Shorty
Weight
0.600 LB (273.000 GM)
Brand Name
Greenlee
GTIN-14: 
00783310317968
UPC: 
783310317968
UNSPSC: 
27111537
Height: 
0.9000 IN
Width: 
0.9000 IN
Length: 
7.4000 IN
Gross Weight: 
0.500 L
Country of Origin: 
US
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

612-GRNL

PISTON, BOXED-1-1/2"
Manufacturer: GREENLEE TEXTRON
GRN 612 PISTON, BOXED-1-1/2"
manufacturer discounts
$500.00 - $9.21 each
$1,000.00 - $8.77 each
$2,000.00 - $8.48 each

$ 10.60 each

4 In stock
Full Description:
1-1/2" Conduit piston for use with blower or vacuum power fishing system to pioneer the line through the conduit run. Flexible foam body for an air-tight seal. Color-coded end disk with embossed size markings for fast, easy selection. Strong steel center rod with loops on both ends. Pistons available for all types and sizes of conduit 1/2" through 6". Standard pack of 2.
MPN: 
612-GRNL
Unspsc Family
Electrical equipment and components and supplies
Unspsc Class
Electrical hardware and supplies
Unspsc Commodity
Wire and cable pulling device
Brand Name
Greenlee
Application
Use with blower or vacuum power fishing system to start conduit run.
Type
Foam piston for all conduit types
Capacity
1-1/2 In
Special Features
Use with blower or vacuum power fishing system to pioneer the line through the conduit run. Flexible foam body for an air-tight seal. Color-coded end disk with embossed size marking for fast easy selection. Strong steel center rod with loops on both ends. Pistons available for all types and sizes of conduit 1/2" - 6".
GTIN-14: 
00783310110422
UPC: 
783310110422
UNSPSC: 
39121722
Height: 
5.2000 IN
Width: 
2.3000 IN
Length: 
5.1000 IN
Gross Weight: 
0.100 L
Country of Origin: 
US
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

30008

BIT, K/S STEP #8 (PKGD)
Manufacturer: GREENLEE TEXTRON
GRN 30008 BIT, K/S STEP #8 (PKGD)
manufacturer discounts
$500.00 - $73.92 each
$1,000.00 - $70.40 each
$2,000.00 - $68.06 each

$ 85.07 each

1 In stock
Full Description:
Kwik Stepper® #8 Multi Hole Step Bit. Unique split-tip design penetrates through steel faster. Resists walking or skidding, even on round surfaces. Balanced, double-flute construction requires less pressure, does the work for you. Designed and manufactured in USA..
MPN: 
30008
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Multi step drill
Brand Name
Greenlee
Sub Brand
Kwik Stepper
Type
Multi Hole
Maximum Sheet Metal Thickness
10 gauge (3.5mm)
Minimum Drill Diameter
1/2 In
Maximum Drill Diameter
1-1/8 In
Special Features
Steam oxide finish runs cooler for longer life. Unique split-tip design penetrates steel faster.
GTIN-14: 
00783310300083
UPC: 
783310300083
UNSPSC: 
23241640
Height: 
1.3000 IN
Width: 
3.6000 IN
Length: 
7.8000 IN
Gross Weight: 
0.280 L
Country of Origin: 
US
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

DTAP10-32

DRILL/TAP, 10-32
Manufacturer: GREENLEE TEXTRON
GRN DTAP10-32 DRILL/TAP, 10-32
manufacturer discounts
$500.00 - $7.02 each
$1,000.00 - $6.68 each
$2,000.00 - $6.46 each

$ 8.08 each

1 In stock
Full Description:
Combination Drill/Tap Bits. 10-32NF. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MPN: 
DTAP10-32
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Threading taps
Material
High Speed Steel
Material Thickness
Up to 10 GA
Material Type
Mild Steel, Copper, Brass, Aluminum
Point Type
Split Point With Web Thinning
Shank
1/4 IN Quick Change Hex
Size
#10
Thread Per Inch
32 TPI
Thread Type
NF
Brand Name
Greenlee
GTIN-14: 
00783310176145
UPC: 
783310176145
UNSPSC: 
27112806
Height: 
0.6000 IN
Width: 
2.7500 IN
Length: 
6.0000 IN
Gross Weight: 
0.050 L
Country of Origin: 
CN
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

DTAP1/4-20

DRILL/TAP,1/4-20
Manufacturer: GREENLEE TEXTRON
GRN DTAP1/4-20 DRILL/TAP,1/4-20
manufacturer discounts
$500.00 - $7.02 each
$1,000.00 - $6.68 each
$2,000.00 - $6.46 each

$ 8.08 each

3 In stock
Full Description:
Combination Drill/Tap Bits. 1/4-20NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MPN: 
DTAP1/4-20
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Threading taps
Material
High Speed Steel
Material Thickness
Up to 10 GA
Material Type
Mild Steel, Copper, Brass, Aluminum
Point Type
Split Point With Web Thinning
Shank
1/4 IN Quick Change Hex
Size
1/4 IN
Thread Per Inch
20 TPI
Thread Type
NC
Brand Name
Greenlee
GTIN-14: 
00783310176169
UPC: 
783310176169
UNSPSC: 
27112806
Height: 
1.0000 IN
Width: 
2.6000 IN
Length: 
5.6000 IN
Gross Weight: 
0.060 L
Country of Origin: 
CN
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

60A-7/8

BIT, AUGER,QUICK CHANGE
Manufacturer: GREENLEE TEXTRON
GRN 60A-7/8 BIT, AUGER,QUICK CHANGE
manufacturer discounts
$500.00 - $8.82 each
$1,000.00 - $8.40 each
$2,000.00 - $8.12 each

$ 10.15 each

3 In stock
Full Description:
Stubby Auger Wood Bit, 7/8" (22.2 mm). Over center single flute design for cleaner holes and less splintering. Unique cutting edge designfor fast and smooth cutting action. Shorter than the top competitor's bit for better access to tight spaces between studs and joists. Perfect for drilling 2" and 4" joists. Augers have self-feeding screw point that draws bit through all wood types with less operator fatigue. Eliminates the need for special tools such as expensive right angle drills or multiple steps to cut the hole to size. 1/4" hex quick change design for fast and easy use in all drill types. Clearly marked with bit diameter and catalog number on shank for easy identification.
MPN: 
60A-7/8
Unspsc Family
Hand tools
Unspsc Class
Cutting and crimping and punching tools
Unspsc Commodity
Wood auger bit
Application
For Drilling 2.000 IN And 4.000 IN Joists And Wood
Bit Diameter
7/8 IN (22.200 MM)
Overall Length
4.500 IN (144.000 MM)
Shank Diameter
1/4 IN
Shank Type
Hexagonal
Type
Stubby, Quick Change
Weight
0.300 LB (149.000 GM)
Brand Name
Greenlee
GTIN-14: 
00783310124184
UPC: 
783310124184
UNSPSC: 
27111537
Height: 
1.0000 IN
Width: 
4.0000 IN
Length: 
8.5000 IN
Gross Weight: 
0.300 L
Country of Origin: 
CN
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

DTAP8-32

DRILL/TAP, 8-32.
Manufacturer: GREENLEE TEXTRON
GRN DTAP8-32 DRILL/TAP, 8-32.
manufacturer discounts
$500.00 - $7.02 each
$1,000.00 - $6.68 each
$2,000.00 - $6.46 each

$ 8.08 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Combination Drill/Tap Bits. 8-32NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MPN: 
DTAP8-32
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Threading taps
Material
High Speed Steel
Material Thickness
Up to 10 GA
Material Type
Mild Steel, Copper, Brass, Aluminum
Point Type
Split Point With Web Thinning
Shank
1/4 IN Quick Change Hex
Size
#8
Thread Per Inch
32 TPI
Thread Type
NC
Brand Name
Greenlee
GTIN-14: 
00783310176121
UPC: 
783310176121
UNSPSC: 
27112806
Height: 
0.7500 IN
Width: 
3.0000 IN
Length: 
6.0000 IN
Gross Weight: 
0.045 L
Country of Origin: 
CN
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

DTAPM6C

DRILL/TAP, M6 X 1.00 (POP)
Manufacturer: GREENLEE TEXTRON
GRN DTAPM6C DRILL/TAP, M6 X 1.00 (P
manufacturer discounts
$500.00 - $8.10 each
$1,000.00 - $7.72 each
$2,000.00 - $7.46 each

$ 9.32 each

2 In stock
Full Description:
Combination Drill/Tap Bits. M6 x 1.00. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MPN: 
DTAPM6C
Unspsc Family
Hand tools
Unspsc Class
Tool attachments and accessories
Unspsc Commodity
Threading taps
Material
High Speed Steel
Material Thickness
Up to 10 GA
Material Type
Mild Steel, Copper, Brass, Aluminum
Point Type
Split Point With Web Thinning
Shank
1/4 IN Quick Change Hex
Size
M6 X 1.000 MM
Thread Type
Metric
Brand Name
Greenlee
GTIN-14: 
00783310121633
UPC: 
783310121633
UNSPSC: 
27112806
Height: 
0.8750 IN
Width: 
2.8750 IN
Length: 
5.7500 IN
Gross Weight: 
0.060 L
Country of Origin: 
CN
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

540-24

FISHSTIX KIT, LONG (540-24)
Manufacturer: GREENLEE TEXTRON
GRN 540-24 FISHSTIX KIT, LONG (540
manufacturer discounts
$500.00 - $97.65 each
$1,000.00 - $93.00 each
$2,000.00 - $89.90 each