Products
$0.91 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
2" Schedule 40 PVC Couplings
2" Schedule 40 PVC Couplings
Topaz�s Schedule 40 PVC Couplings stand up to water pressure and damage from corrosive elements. Our...150
Topaz�s Schedule 40 PVC Couplings stand up to water pressure and damage from corrosive elements. Our easy to install Couplings are available in a wide range of sizes from 1/2� to 6.� Two female ends and slip fit installation ensure a watertight joining and proper positioning of conduit. Always in stock; cULus approved.
- The fitting consist of two female ends with a center stop
- Both pieces of pipe should seat at the stop for proper positioning
- The fitting consist of two female ends with a center stop
- Both pieces of pipe should seat at the stop for proper positioning
- UPC
- 751338230064
- UNSPSC
- 39131707
- Country of Origin
- MUL
- Material:
- PVC
- Type:
- Coupling
- Diameter (IN):
- 2.6875 IN
- Inside Diameter:
- 2.375 IN
- Inside Min (IN):
- 2.375 IN
- Installation Type:
- Compression
- Label Description:
- PVC COUPLING
- Length:
- 2.4375 in
- Material:
- PVC
- Nominal Length Inches:
- 2.910
- Outside Diameter:
- 2.6875 in
- Schedule:
- 40 PVC
- Size (IN):
- 2" IN
- Size (trade) (IN):
- 2 IN
- Standard:
- UL E170258, CSA Certified, UL 514B, Federal Specification A-A-50552, NEMA/ANSI FB-1, Military Specification Number W-F-406D, W-F-406E, W-F-408D, W-S-610D
- Trade Size:
- 2 in
- Type:
- Coupling
- Wall Thickness:
- Schedule 40
2" Schedule 40 PVC Couplings
$0.91 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$10.99 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1/2" Form 7 Rigid LL Type Conduit Bodies
1/2" Form 7 Rigid LL Type Conduit Bodies
Topaz�s Form 7 Conduit Bodies Rigid LL type Conduit Bodies features strong iron fabrication with a z...150
Topaz�s Form 7 Conduit Bodies Rigid LL type Conduit Bodies features strong iron fabrication with a zinc plated finish for enhanced durability. LL type conduit bodies permit 90� left bends in conduit systems, provide easy access for splicing and can correct and change direction of conduit runs.NPT tapered hubs offer protection for conductor insulation Topaz�s Form 7 Conduit Bodies and Covers are interchangeable with every major brand Form 7 Series. Meets Federal Spec. A-A 50563; NEMA FB1 and NEMA 3R approved raintight when installed with cover and gasket. UL514A and UL514B listed and available in sizes from 1/2� to 4�.
- NPT tapered hubs
- NEMA FB 1/NEMA 3R raintight when installed with cover and gasket
- Suitable for Class 1 Div.2 hazardous locations when installed according tone 2014 501.10(B)(4)
- NPT tapered hubs
- NEMA FB 1/NEMA 3R raintight when installed with cover and gasket
- Suitable for Class 1 Div.2 hazardous locations when installed according tone 2014 501.10(B)(4)
- UPC
- 751338869257
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Color:
- Gray
- Material:
- Iron
- Type:
- LL Type Conduit Body
- Capacity:
- 3.8 CU.IN
- Color:
- Gray
- Connection:
- 1/2 FNPT IN
- Connectors (IN):
- 1/2 FNPT IN
- Cubic (CU-IN):
- 10 inches cubed CU-IN
- Finish:
- Zinc Plated
- Form:
- 7
- Height:
- 2.3 in
- Height (IN):
- 2.3 IN
- Hub Size:
- 0.5 in
- Label Description:
- RIGID CONDUIT BODY- LL TYPE- FORM 7
- Length:
- 4.5 in
- Material:
- Iron
- Mounting:
- Wall Mount
- Nominal Length Inches:
- 12.500
- Size (IN):
- 1/2" IN
- Size (trade) (IN):
- 1/2" IN
- Standard:
- cULus E195124 Listed, UL Standard 514A, NEMA FB-1, NEMA 3R, Federal Specification A-A-50563
- Type:
- LL Type Conduit Body
- WebShop Width (IN):
- 1.4 IN
- Width:
- 1.4 in
- Wire Size:
- 3.8
1/2" Form 7 Rigid LL Type Conduit Bodies
$10.99 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$10.03 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1-1/4" Threaded LL Type Rigid Conduit Body
1-1/4" Threaded LL Type Rigid Conduit Body
Topaz�s Rigid threaded LL type Conduit Body is manufactured from copper free aluminum. Available in...150
Topaz�s Rigid threaded LL type Conduit Body is manufactured from copper free aluminum. Available in sizes from 1/2� to 4�, LL type conduit bodies permit 90� left bends in conduit systems, enable splicing and can correct and change direction of conduit runs. Roomy interior allows for maximum wiring space, smooth, rounded integral bushings in hubs offers protection for conductor insulation. Excellent ground continuity and corrosion resistance; lightweight aluminum construction; UL listed.
- Threaded LL type
- NPT tapered hubs
- Suitable for use in concrete
- Suitable for use in wet locations
- Threaded LL type
- NPT tapered hubs
- Suitable for use in concrete
- Suitable for use in wet locations
- UPC
- 751338210707
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Material:
- Die-Cast Aluminum
- Type:
- LL Type Conduit Body
- Connection:
- 1-1/4 FNPT IN
- Connectors (IN):
- 1-1/4 FNPT IN
- For Use With:
- Rigid Conduit
- Form:
- LL
- Height:
- 2.77 in
- Height (IN):
- 2.770 IN
- Hub Size:
- 1.25 in
- Label Description:
- RIGID CONDUIT BODIES
- Length:
- 7.894 IN
- Material:
- Die-Cast Aluminum
- Mounting:
- Wall Mount
- Nominal Length Inches:
- 12.4
- Number of Conductors:
- 3
- Size (IN):
- 1-1/4" IN
- Size (trade) (IN):
- 1-1/4" IN
- Standard:
- UL E170258, CSA Certified, UL 514B, Federal Specification A-A-50552, NEMA/ANSI FB-1, Military Specification Number W-F-406D, W-F-406E, W-F-408D, W-S-610D
- Type:
- LL Type Conduit Body
- WebShop Width (IN):
- 3.385 IN
- Width:
- 3.385 in
- Wire Size:
- 2 AWG
1-1/4" Threaded LL Type Rigid Conduit Body
$10.03 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$5.16 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3/4" Malleable Iron Rigid Threaded Type LB Conduit Bodies
3/4" Malleable Iron Rigid Threaded Type LB Conduit Bodies
Topaz�s Malleable Iron Rigid Threaded type LB Conduit Body is constructed to offer unmatched high te...150
Topaz�s Malleable Iron Rigid Threaded type LB Conduit Body is constructed to offer unmatched high tensile strength and ductility. Strong and resilient malleable iron fabrication is resistant to damage from corrosion and impact. LB type conduit bodies allow 90� back bends in conduit systems, provide easy access for splicing and can correct and change direction of conduit runs. Roomy interior allows for maximum wiring space, smooth, rounded integral bushings in hubs offers protection for conductor insulation. Available in 1/2� to 4� sizes; UL listed.
- NPT tapered hubs
- Suitable for use in concrete
- NPT tapered hubs
- Suitable for use in concrete
- UPC
- 751338209503
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Material:
- Malleable Iron
- Type:
- LB Type Conduit Body
- Capacity:
- 7.5 CU.IN
- Connection:
- 3/4 FNPT IN
- Connectors (IN):
- 3/4 FNPT IN
- Finish:
- Zinc Plated
- Form:
- LB
- Height:
- 2.37 in
- Height (IN):
- 2.37 IN
- Hub Size:
- 0.75 in
- Label Description:
- RIGID CONDUIT BODIES
- Length:
- 5.31 in
- Material:
- Malleable Iron
- Mounting:
- Wall Mount
- Nominal Length Inches:
- 8.22
- Number of Conductors:
- 3
- Size (trade) (IN):
- 3/4" IN
- Standard:
- UL E195124, CSA Certified, UL 514B, Federal Specification A-A-50563, NEMA/ANSI FB-1, Military Specification Number W-F-406D, W-F-406E, W-F-408D, W-S-610D
- Type:
- LB Type Conduit Body
- WebShop Width (IN):
- 1.48 IN
- Width:
- 1.48 in
- Wire Size:
- 3
3/4" Malleable Iron Rigid Threaded Type LB Conduit Bodies
$5.16 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$120.52 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
2-1/2" Threaded T Type Rigid Conduit Body - Hot Dip Galvanized
2-1/2" Threaded T Type Rigid Conduit Body - Hot Dip Galvanized
Topaz�s high quality line of conduit bodies and covers permit access to conductors for maintenance,...150
Topaz�s high quality line of conduit bodies and covers permit access to conductors for maintenance, make 90� bends in the conduit system and connect and change direction of conduit runs. Ideal for interior or exterior projects of any scope, our conduit bodies and covers are offered in malleable iron strengthened with our Hot Dip Galvanized finish in trade sizes from 1/2� through 4�.The Topaz Rigid T Type Conduit Body�s performance and integrity is assured by our Hot Dip Galvanizing process, which provides superior, long lasting protection against corrosion from inclement weather conditions. Meets project specifications for the Department of Transportation and Mass Transit.Conforms to finish thickness ASTM A123/123M; UL514A & UL514D listed; NEMA FB1 compliant and meets Federal Spec. A-A-50563.
- Hot dip galvanized finish provides superior protection against severe environmental factors
- Hot dip galvanized finish provides superior protection against severe environmental factors
- UPC
- 751338866591
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Material:
- Malleable Iron
- Type:
- T Type Conduit Body
- Capacity:
- 146 CU.IN
- Connection:
- Female Threaded
- Connectors (IN):
- Female Threaded IN
- Finish:
- Hot-Dip Galvanize
- Form:
- T
- Height:
- 3.94 in
- Height (IN):
- 3.94 IN
- Hub Size:
- 2.5 in
- Label Description:
- RIGID CONDUIT BODY- T TYPE -HOT DIP GALVANIZED
- Length:
- 15 in
- Material:
- Malleable Iron
- Mounting:
- Wall Mount
- Nominal Length Inches:
- 18.125
- Number of Conductors:
- 3
- Size (trade) (IN):
- 2-1/2" IN
- Standard:
- UL E195124, ASTM A123/123M, UL514B, NEMA FB1, Federal Specification A-A-50563
- Type:
- T Type Conduit Body
- WebShop Width (IN):
- 5.72 IN
- Width:
- 5.72 in
- Wire Size:
- 300 MCM
2-1/2" Threaded T Type Rigid Conduit Body - Hot Dip Galvanized
$120.52 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$4.43 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3/4" EMT Set Screw Type T Aluminum Conduit Body
3/4" EMT Set Screw Type T Aluminum Conduit Body
Topaz�s EMT set screw T Type Conduit Body is manufactured from copper free aluminum. T type conduit...150
Topaz�s EMT set screw T Type Conduit Body is manufactured from copper free aluminum. T type conduit bodies allow 3-way inline access in conduit systems, enable easy splicing and can correct and change direction of conduit runs. Roomy interior allows for maximum wiring space, smooth, rounded integral bushings in hubs offers protection for conductor insulation. Excellent ground continuity and corrosion resistance; lightweight aluminum construction; flat back design for easy, flat mounting against surface. UL listed.
- Set screw T type
- Suitable for use in concrete
- Set screw T type
- Suitable for use in concrete
- UPC
- 751338207004
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Label Description:
- EMT CONDUIT BODY- T TYPE
- Size (IN):
- 3/4" IN
- Size (trade) (IN):
- 3/4" IN
- Wire Size:
- 6 AWG
3/4" EMT Set Screw Type T Aluminum Conduit Body
$4.43 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$3.69 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3/4" Set Screw C Type EMT Conduit Body
3/4" Set Screw C Type EMT Conduit Body
Topaz�s EMT set screw C Type Conduit Body is manufactured from copper free aluminum. C type conduit...150
Topaz�s EMT set screw C Type Conduit Body is manufactured from copper free aluminum. C type conduit bodies are engineered with a straight through configuration and enable the easiest access for pulling and splicing. Roomy interior allows for maximum wiring space, smooth, rounded integral bushings in hubs offers protection for conductor insulation. Excellent ground continuity and corrosion resistance; lightweight aluminum construction; flat back design for easy, flat mounting against surface. UL listed
- UPC
- 751338204201
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Material:
- Die-Cast Aluminum
- Type:
- C Type Conduit Body
- Connection:
- Female Threaded
- Connectors (IN):
- Female Threaded IN
- For Use With:
- EMT Conduit
- Form:
- C
- Height:
- 1.625 in
- Height (IN):
- 1.625 IN
- Hub Size:
- 0.75 in
- Label Description:
- EMT CONDUIT BODY- C TYPE
- Length:
- 5.57 in
- Material:
- Die-Cast Aluminum
- Mounting:
- Wall Mount
- Nominal Length Inches:
- 12.500
- Number of Conductors:
- 2
- Screw Material:
- Steel
- Size (IN):
- 3/4" IN
- Size (trade) (IN):
- 3/4" IN
- Standard:
- UL E170258, CSA Certified, UL 514B, Federal Specification A-A-50563, NEMA/ANSI FB-1, Military Specification Number W-F-406D, W-F-406E, W-F-408D, W-S-610D
- Type:
- C Type Conduit Body
- WebShop Width (IN):
- 1.540 IN
- Width:
- 1.54 in
- Wire Size:
- 6 AWG
3/4" Set Screw C Type EMT Conduit Body
$3.69 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$19.73 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
2" EMT Set Screw Type T Aluminum Conduit Body
2" EMT Set Screw Type T Aluminum Conduit Body
Topaz�s EMT set screw T Type Conduit Body is manufactured from copper free aluminum. T type conduit...150
Topaz�s EMT set screw T Type Conduit Body is manufactured from copper free aluminum. T type conduit bodies allow 3-way inline access in conduit systems, enable easy splicing and can correct and change direction of conduit runs. Roomy interior allows for maximum wiring space, smooth, rounded integral bushings in hubs offers protection for conductor insulation. Excellent ground continuity and corrosion resistance; lightweight aluminum construction; flat back design for easy, flat mounting against surface. UL listed.
- Set screw T type
- Suitable for use in concrete
- Set screw T type
- Suitable for use in concrete
- UPC
- 751338207400
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Label Description:
- EMT CONDUIT BODY- T TYPE
- Size (IN):
- 2" IN
- Size (trade) (IN):
- 2" IN
- Wire Size:
- 2/0 AWG
2" EMT Set Screw Type T Aluminum Conduit Body
$19.73 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders