Products

$4.72 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1/2" EMT & Rigid Combo LL Type Aluminum Conduit Bodies with Covers & Gaskets
1/2" EMT & Rigid Combo LL Type Aluminum Conduit Bodies with Covers & Gaskets
Topaz�s EMT and Rigid combo LL type Conduit Body, with Cover and Gasket, is manufactured from corros...150
Topaz�s EMT and Rigid combo LL type Conduit Body, with Cover and Gasket, is manufactured from corrosion resistant aluminum. LL type conduit bodies have a hub on one end and one on the left side, provide easy access for splicing and can correct and change direction of conduit runs. Domed cover allows for additional wiring space; NEMA FB 1 rated for wet locations, use with threaded rigid metal conduit only.Roomy interior allows for maximum wiring space, smooth, rounded integral bushings in hubs offers protection for conductor insulation. Excellent ground continuity and corrosion resistance; lightweight aluminum construction; UL listed; available in sizes from 1/2� to 2�.
- Combination C type with cover and gasket
- NPT tapered hubs
- Suitable for use in concrete
- NEMA FB 1 rated for wet locations use with threaded rigid metal conduit only
- Combination C type with cover and gasket
- NPT tapered hubs
- Suitable for use in concrete
- NEMA FB 1 rated for wet locations use with threaded rigid metal conduit only
- UPC
- 751338837744
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Material:
- Die-Cast Aluminum
- Type:
- LL Type Combo Conduit Body
- Connection:
- 1/2 FNPT IN
- Connectors (IN):
- 1/2 FNPT IN
- Cover Material:
- Stamped Steel
- For Use With:
- Rigid/EMT/IMC Conduit
- Form:
- LL
- Gasket Material:
- Neoprene Rubber
- Height:
- 1.31 in
- Height (IN):
- 1.31 IN
- Hub Size:
- 0.5 in
- Label Description:
- EMT & RIGID CONDUIT BODY - LL TYPE W/ COVER & GASKET
- Length:
- 4.56 in
- Material:
- Die-Cast Aluminum
- Mounting:
- Wall Mount
- Nominal Length Inches:
- 11-3/4
- Number of Conductors:
- 1
- Screw Material:
- Steel
- Size (IN):
- 1/2" IN
- Size (trade) (IN):
- 1/2" IN
- Standard:
- UL E170258, CSA Certified, UL 514B, Federal Specification A-A-50552, NEMA/ANSI FB-1, Military Specification Number W-F-406D, W-F-406E, W-F-408D, W-S-610D
- Type:
- LL Type Combo Conduit Body
- WebShop Width (IN):
- 2.06 IN
- Width:
- 2.06 in
- Wire Size:
- 6 AWG
1/2" EMT & Rigid Combo LL Type Aluminum Conduit Bodies with Covers & Gaskets
$4.72 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders

$18.62 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1" Rigid Threaded C Type Conduit Bodies - Hot Dip Galvanized
1" Rigid Threaded C Type Conduit Bodies - Hot Dip Galvanized
Topaz�s high quality line of conduit bodies and covers permit access to conductors for pulling, spli...150
Topaz�s high quality line of conduit bodies and covers permit access to conductors for pulling, splicing and maintenance, provide taps for branch conduit runs and acts as pull outlets for conductor installation. Ideal for interior or exterior projects of any scope, our conduit bodies and covers are offered in malleable iron, strengthened with our Hot Dip Galvanized finish in trade sizes from 1/2� through 4�.The Topaz Rigid C Type Conduit Body�s performance and integrity is assured through by our Hot Dip Galvanizing process, which provides superior, long lasting protection against corrosion from inclement weather conditions. Meets project specifications for the Department of Transportation and Mass Transit.Conforms to finish thickness ASTM A123/123M; UL514A & UL514D listed; NEMA FB1 compliant and meets Federal Spec. A-A-50563.
- Hot dip galvanized finish provides superior protection against severe environmental factors
- Hot dip galvanized finish provides superior protection against severe environmental factors
- UPC
- 751338866454
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Material:
- Malleable Iron
- Type:
- C Type Conduit Body
- Capacity:
- 12.5 CU.IN
- Connection:
- Female Threaded
- Connectors (IN):
- Female Threaded IN
- Finish:
- Hot-Dip Galvanize
- Form:
- C
- Height:
- 1.98 in
- Height (IN):
- 1.98 IN
- Hub Size:
- 1 in
- Label Description:
- RIGID CONDUIT BODY- C TYPE- HOT DIP GALVANIZED
- Length:
- 7.16 IN
- Material:
- Malleable Iron
- Mounting:
- Wall Mount
- Nominal Length Inches:
- 5.31
- Number of Conductors:
- 3
- Size (trade) (IN):
- 1" IN
- Standard:
- UL E195124, ASTM A123/123M, UL514B, NEMA FB1, Federal Specification A-A-50563
- Threaded hub (IN):
- 1 IN
- Type:
- C Type Conduit Body
- WebShop Width (IN):
- 1.79 IN
- Width:
- 1.79 in
- Wire Size:
- 4 AWG
1" Rigid Threaded C Type Conduit Bodies - Hot Dip Galvanized
$18.62 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders

$66.71 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
2" Threaded LB Type Rigid Conduit Bodies - Hot Dip Galvanized
2" Threaded LB Type Rigid Conduit Bodies - Hot Dip Galvanized
Topaz�s high quality line of conduit bodies and covers permit access to conductors for maintenance,...150
Topaz�s high quality line of conduit bodies and covers permit access to conductors for maintenance, make 90� bends in the conduit system and connect and change direction of conduit runs. Ideal for interior or exterior projects of any scope, our conduit bodies and covers are offered in malleable iron, strengthened with our Hot Dip Galvanized finish in trade sizes from 1/2� through 4�.The Topaz Rigid LB Type Conduit Body�s performance and integrity is assured through our Hot Dip Galvanizing process, which provides superior, long lasting protection against corrosion from inclement weather conditions. Designed for use on infrastructure projects including bridges, tunnels and railways; meets project specifications for the Department of Transportation and Mass Transit.Conforms to finish thickness ASTM A123/123M; UL514A & UL514D listed; NEMA FB1 compliant and meets Federal Spec. A-A-50563.
- Hot dip galvanized finish provides superior protection against severe environmental factors
- Hot dip galvanized finish provides superior protection against severe environmental factors
- UPC
- 751338866188
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Material:
- Malleable Iron
- Type:
- LB Type Conduit Body
- Capacity:
- 73 CU.IN
- Connection:
- Female Threaded
- Connectors (IN):
- Female Threaded IN
- Finish:
- Hot-Dip Galvanize
- Form:
- LB
- Height:
- 4.52 in
- Height (IN):
- 4.52 IN
- Hub Size:
- 2 in
- Label Description:
- RIGID CONDUIT BODY- LB TYPE- HOT DIP GALVANIZED
- Length:
- 10.53 in
- Material:
- Malleable Iron
- Mounting:
- Wall Mount
- Nominal Length Inches:
- 6.25
- Number of Conductors:
- 3
- Size (trade) (IN):
- 2" IN
- Standard:
- UL E195124 Listed, ASTM A123/123M, UL514A and UL514D, NEMA FB1, Federal Specification A-A-50563
- Threaded hub (IN):
- 2 IN
- Type:
- LB Type Conduit Body
- WebShop Width (IN):
- 3.15 IN
- Width:
- 3.15 in
- Wire Size:
- 4/0 AWG
2" Threaded LB Type Rigid Conduit Bodies - Hot Dip Galvanized
$66.71 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders

$69.84 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
2-1/2" - 3" Form 7 Liquidtight Conduit Body Cover with Integral Gasket
2-1/2" - 3" Form 7 Liquidtight Conduit Body Cover with Integral Gasket
Offering the best protection on the market�Topaz�s unique Form 7 Cover Liquidtight Cover with Integr...150
Offering the best protection on the market�Topaz�s unique Form 7 Cover Liquidtight Cover with Integral Gasket wedge-shape engineering allows for easy removal without damaging the conduit body and eliminates the need to re-tap corroded body screws. Liquidtight installations assures body will remain free from elemental damage. Cover screws have beveled heads to match chamfered screw holes that prevent water from entering conduit body. Our Iron Covers feature a zinc plated finish for enhanced durability and continued safety Topaz�s Form 7 Conduit Bodies and Covers are interchangeable with every major brand Form 7 Series. Meets Federal Spec. A-A 50563; NEMA FB1 and NEMA 4X approved raintight when installed with cover and gasket. IP65 protection rated to withstand intrusion of damaging water and particles, avoiding product compromise. UL514A and UL514B listed and available in sizes from 1/2� to 3 1/2 - 4�.
- Domed for extra capacity
- Liquid tight, raintight, oiltight
- Suitable for use in Class I Division 2,Class II Division 1 & 2, Class III Division 1hazardous locations
- Unique wedge clamp cover design allows easy removal without damaging the conduit body; domed cover design provides additional capacity
- NEMA 4X rated
- Domed for extra capacity
- Liquid tight, raintight, oiltight
- Suitable for use in Class I Division 2,Class II Division 1 & 2, Class III Division 1hazardous locations
- Unique wedge clamp cover design allows easy removal without damaging the conduit body; domed cover design provides additional capacity
- NEMA 4X rated
- UPC
- 751338872028
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Color:
- Gray
- Material:
- Iron
- Type:
- Liquidtight Cover
- Color:
- Gray
- For Use With:
- For Topaz Form 7 Conduit Bodies
- Form:
- 7
- Height:
- 0.8 in
- Height (IN):
- 0.8 IN
- Hub Size:
- 2.5/3 in
- IP Rating:
- IP65
- Label Description:
- CONDUIT BODY COVER- FORM 7
- Length:
- 9.1 in
- Material:
- Iron
- Mounting:
- Clamp On
- Nominal Length Inches:
- 15
- Screw Material:
- Stainless Steel
- Seal Material:
- Silicone
- Size (IN):
- 2-1/2"-3" IN
- Size (trade) (IN):
- 2-1/2"-3" IN
- Standard:
- cULus E195124 Listed, UL 514A, NEMA FB-1, Federal Specification A-A-50563, NEMA 4X
- Type:
- Liquidtight Cover
- WebShop Width (IN):
- 4.3 IN
- Width:
- 4.3 in
2-1/2" - 3" Form 7 Liquidtight Conduit Body Cover with Integral Gasket
$69.84 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders


Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$44.26 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1/2" FD BOX DEEP SINGLE HUB HOT DIP GALVANIZED-10PK
1/2" FD BOX DEEP SINGLE HUB HOT DIP GALVANIZED-10PK
150
- UPC
- 751338018051
- UNSPSC
- 39131708
- Country of Origin
- MUL
1/2" FD BOX DEEP SINGLE HUB HOT DIP GALVANIZED-10PK
$44.26 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders

$10.90 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1" EMT & Rigid LL Type Combination Conduit Body
1" EMT & Rigid LL Type Combination Conduit Body
Topaz�s EMT and Rigid combo LL type Conduit Body is constructed from naturally corrosion resistant a...150
Topaz�s EMT and Rigid combo LL type Conduit Body is constructed from naturally corrosion resistant aluminum. LL type conduit bodies have a hub on one end and one on the left side, provide easy access for splicing and can correct and change direction of conduit runs. Roomy interior allows for maximum wiring space, smooth, rounded integral bushings in hubs offers protection for conductor insulation. Excellent ground continuity and corrosion resistance; lightweight aluminum construction; flat back design for easy, flat mounting against surface. UL listed; available in sizes from 1/2� to 2�.
- Combination LL type
- NPT tapered hubs
- Suitable for use in concrete
- NEMA FB 1 rated for wet locations use with threaded rigid metal conduit only
- Combination LL type
- NPT tapered hubs
- Suitable for use in concrete
- NEMA FB 1 rated for wet locations use with threaded rigid metal conduit only
- UPC
- 751338210622
- UNSPSC
- 39131708
- Country of Origin
- MUL
- Material:
- Die-Cast Aluminum
- Type:
- LL Type Combo Conduit Body
- Connection:
- 1 FNPT IN
- Connectors (IN):
- 1 FNPT IN
- For Use With:
- Rigid/EMT/IMC Conduit
- Form:
- LL
- Height:
- 1.88 in
- Height (IN):
- 1.88 IN
- Hub Size:
- 1 in
- Label Description:
- EMT & RIGID CONDUIT BODY - LL TYPE
- Length:
- 6.25 in
- Material:
- Die-Cast Aluminum
- Mounting:
- Wall Mount
- Nominal Length Inches:
- 5.31
- Number of Conductors:
- 3
- Size (IN):
- 1" IN
- Size (trade) (IN):
- 1" IN
- Standard:
- UL E170258, CSA Certified, UL 514B, Federal Specification A-A-50563, NEMA/ANSI FB-1, Military Specification Number W-F-406D, W-F-406E, W-F-408D, W-S-610D
- Threaded hub (IN):
- 1 IN
- Type:
- LL Type Combo Conduit Body
- WebShop Width (IN):
- 2.50 IN
- Width:
- 2.5 in
- Wire Size:
- 6 AWG
1" EMT & Rigid LL Type Combination Conduit Body
$10.90 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders

$6.21 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
4" Square Box Mounting Plate with 1/2" Single Gang Device Ring
4" Square Box Mounting Plate with 1/2" Single Gang Device Ring
Topaz�s 4" Square Box Mounting Plate with 1/2" Single Gang Device Ring features a heavy-duty support...150
Topaz�s 4" Square Box Mounting Plate with 1/2" Single Gang Device Ring features a heavy-duty support plate with a built-in single gang device ring. These galvanized steel box supports are used to mount a 4" square box to a metal stud while eliminating the need for a far side support. Available in 1/2", 5/8", and 3/4" depth.
- Heavy duty support plate with built-in single gang device ring
- Available in 1/2", 5/8" and 3/4" depths
- Oversized holes to easily view marked lines on stud
- Heavy duty support plate with built-in single gang device ring
- Available in 1/2", 5/8" and 3/4" depths
- Oversized holes to easily view marked lines on stud
- UPC
- 751338036949
- Label Description:
- 4" SQUARE BOX SUPPORT COVER
- Size (IN):
- 4" IN
4" Square Box Mounting Plate with 1/2" Single Gang Device Ring
$6.21 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders


Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$12.52 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3/4" 90� Liquidtight Connector, HDG, with Insulated Throat
3/4" 90� Liquidtight Connector, HDG, with Insulated Throat
Topaz�s 3/4" 90� Liquidtight Connectors are fabricated from strong malleable iron with a Hot Dip Gal...150
Topaz�s 3/4" 90� Liquidtight Connectors are fabricated from strong malleable iron with a Hot Dip Galvanized finish and come with a steel locknut. The connector features an insulated throat to protect conductors from abrasion damage, they are Liquidtight, Raintight, and Oiltight and are suitable for wet locations. UL listed liquidtight flexible metal conduit fittings are used to secure, ground and seal liquidtight conduit to a box or enclosure and are suitable for use in the following hazardous locations under: NEC 501-4(b), 502-4(a), (2)503-3(a) Class 1 Div.2, Class II Div.1 and 2, Class III Div.1 and 2 and are suitable for grounding in sizes 3/8" through 1-1/2" under NEC 351-I
- Hot dip galvanized
- Liquid tight, raintight, oiltight
- Suitable for wet location use
- Tapered threaded male hub NPT
- Insulated throat protects conductors from abrasion damage
- Compact slim diameter with small turning radius
- Hot dip galvanized
- Liquid tight, raintight, oiltight
- Suitable for wet location use
- Tapered threaded male hub NPT
- Insulated throat protects conductors from abrasion damage
- Compact slim diameter with small turning radius
- UPC
- 751338037533
3/4" 90� Liquidtight Connector, HDG, with Insulated Throat
$12.52 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders