3M™ Fire Barrier Composite Sheet CS-195+ is a lightweight intumescent firestop that combines four components into a single system to help slow the spread of fire, smoke and noxious gases. Sheets combine 28-gauge steel, intumescent material, wire mesh and aluminum foil and are easy to handle and install with common trade tools. They are firestop tested for up to 4 hours of fire protection.

3M™ Fire Barrier Composite Sheet CS-195+ is a lightweight intumescent firestop that combines four components into a single system to help slow the spread of fire, smoke and noxious gases. Sheets combine 28-gauge steel, intumescent material, wire mesh and aluminum foil and are easy to handle and install with common trade tools. They are firestop tested for up to 4 hours of fire protection. read less

Firestopping in Nearly Any Size and ShapeFor larger openings and penetrations where putties and stri...150 read more

Firestopping in Nearly Any Size and ShapeFor larger openings and penetrations where putties and strips alone aren’t enough, 3M™ Fire Barrier Composite Sheet CS-195+ is a one-part firestop system that installers can cut and form to exact sizes – no mixing or damming required. These sheets are easily installed using common tools and fasteners. Ideal for firestopping penetrations such as cable trays and conduit, the sheets feature intumescent material bonded to 28-gauge galvanized steel, reinforced on its facing side with hexagonal wire mesh and covered in aluminum foil. This combination of organic/inorganic materials makes these composite sheets a reliable firestop in tested and listed systems, new and retrofit. These materials also make an excellent thermal conductor, helping to dispel built-up radiant heat to preserve process and control equipment and help minimize cable derating concerns.Recommended Applications Seal penetrations through fire-rated walls and floors Firestop penetrations including cable trays, cable, piping and large blanks Multiple component installations where heat build-up and derating are concerns Shield conduit, HVAC ductwork, panels, valves and vital heat-sensitive process equipment Fire-resistive and smoke seal for any shape opening in concrete block or slabs Protect cable drop-outs, junction boxes and cabinets Intermittent firestop in horizontal and vertical cable tray runs In conjunction with 3M™ Fire Barrier Sealant or Moldable Putty MP+Fully Tested and Approved3M™ Fire Barrier Composite Sheet CS-195+ is firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479).The Science of Better Fire Protection from 3MSince 1925 when a 3M lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each adhesive, sealant, protective coating, device and firestop product including 3M™ Fire Barrier Composite Sheet CS-195+ to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less

Our 3M™ Fire Barrier Wrap Strips FS-195+ are a convenient and cost-effective firestop for plastic pipe, insulated pipe and cable, blank and other penetrations in fire-rated wall, floor and floor/ceiling assemblies. This intumescent firestop with aluminum foil exterior blocks flame, heat and toxic by-products of combustion. Installers simply wrap the strips around the penetration, secure and seal.

Our 3M™ Fire Barrier Wrap Strips FS-195+ are a convenient and cost-effective firestop for plastic pipe, insulated pipe and cable, blank and other penetrations in fire-rated wall, floor and floor/ceiling assemblies. This intumescent firestop with aluminum foil exterior blocks flame, heat and toxic by-products of combustion. Installers simply wrap the strips around the penetration, secure and seal. read less

Firestop Material for a Range of ApplicationsEngineered as a wrappable firestop for applications inc...150 read more

Firestop Material for a Range of ApplicationsEngineered as a wrappable firestop for applications including blank penetrations, large openings and even plastic and other non-metallic pipe penetration systems, 3M™ Fire Barrier Wrap Strips FS-195+ are fire-rated up to 4 hours in tested and listed systems and meets ASTM E814 (UL 1479) performance standards. Intumescent material expands when heated to deliver excellent thermal insulation, as well as provide an effective firestop for non-metallic penetrants.Recommended Applications Plastic pipe and conduit penetrations up to 10” diameter Metal pipe penetrations Insulated pipe penetrations Blank penetrations Bus ducts Cable trays and bundles In conjunction with 3M™ Fire Barrier Composite Sheet CS-195+ for large openings Use with 3M™ Fire Barrier RC-1 Restricting Collar3M™ Fire Barrier Wrap Strips FS-195+ can be installed into a wide range of applications because of its convenient wrappable strip construction – the flexible, firestop material comes in strips which can be quickly and easily wrapped around the penetration. Installers simply apply the strip, cut it with common tools, secure it in place with a 3M™ Fire Barrier RC-1 Restricting Collar, steel tie wire and/or 3M™ Composite Sheet CS-195+ and seal it with materials such as 3M™ Fire Barrier Sealant CP 25WB+ or Moldable Putty. It is designed for excellent weatherability against temperature and humidity, and is re-enterable to save added time and material costs after installation.The Science of Better Fire Protection from 3MSince 1925 when a 3M lab assistant invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each 3M adhesive, sealants and protective coatings including 3M™ Fire Barrier Wrap Strips FS-195+ – to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less

Designed to expand up to 5 times in volume after dispensing, 3M™ Fire Barrier Rated Foam FIP 1-Step is a two-part urethane, smoke, sound and firestopping foam. This intumescent foam can be used to fill the annular space created by pipes and cables penetrating through fire-rated construction. It’s an alternative to mineral wool, bricks, pillows and runny, ineffective foams and is UL listed.

Designed to expand up to 5 times in volume after dispensing, 3M™ Fire Barrier Rated Foam FIP 1-Step is a two-part urethane, smoke, sound and firestopping foam. This intumescent foam can be used to fill the annular space created by pipes and cables penetrating through fire-rated construction. It’s an alternative to mineral wool, bricks, pillows and runny, ineffective foams and is UL listed. read less

Fast Firestopping FoamEfficient and effective, 3M™ Fire Barrier Rated Foam FIP 1-Step is a two...150 read more

Fast Firestopping FoamEfficient and effective, 3M™ Fire Barrier Rated Foam FIP 1-Step is a two-part urethane, smoke, sound and firestopping foam. This intumescent foam is engineered to expand in the event of a fire. It is firestop tested up to 2 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115. When dispensed, this foam cures quickly, reaching full expansion after approximately 2 minutes and expanding up to 5 times its size. This product foams in place without sagging or running and is designed to fill the void between the through penetrant (pipe, cable, etc.) and the wall, creating a firestop seal and restoring the fire rating of the entire wall. We formulated this foam to be re-enterable and repairable, remaining pliable after installation for the easy installation of new cables/conduit in existing openings.Recommended Applications Blank openings Metal pipe Cables Cable tray Insulated pipe Combination penetrationsSustains a Tight Seal3M™ Fire Barrier Rated Foam FIP 1-Step offers excellent adhesion and can be installed in wall or floor applications with no backing material, eliminating the need for mineral wool and caulk. This firestop foam bonds to most construction substrates, including but not limited to, concrete, metal, wood, plastic and cable jacketing. This product is paintable with primer. During a fire, this product maintains a tight firestop against smoke and flame and its air leakage is less than 1 CFM/Sq Ft. 3M™ Fire Barrier Rated Foam FIP 1-Step meets the intent of LEED VOC regulations and is <250 g/L VOC contents (less H2O and exempt solvents). In addition, this foam has an STC rating of 57 when tested in a STC 57 rated wall assembly.One-Step FirestopFinish firestop installations quickly with 3M™ Fire Barrier Rated Foam FIP 1-Step. This one-step solution means less product to order, track and haul. This firestop foam is not runny and stays in place, expanding at a controlled and consistent pace to create a strong seal around pipes, cables and conduits. Tackle tricky installations with confidence in just one step, making firestop installations a whole lot easier.Reliable and Affordable Fire ProtectionEffective and easy to install, 3M™ Fire Barrier Rated Foam FIP 1-Step is part of 3M's family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

Our 3M™ Fire Barrier Moldable Putty Pads MPP+ are a one-part firestop material used in various fire-rated assemblies, such as electrical box protection. Designed to prevent the spread of fire, smoke and noxious gasses, this intumescent material comes ready to use in convenient 1/10 (2.54 mm) thick pads that are conformable by hand with no mixing or tools. Pads are firestop tested up to 4 hours.

Our 3M™ Fire Barrier Moldable Putty Pads MPP+ are a one-part firestop material used in various fire-rated assemblies, such as electrical box protection. Designed to prevent the spread of fire, smoke and noxious gasses, this intumescent material comes ready to use in convenient 1/10 (2.54 mm) thick pads that are conformable by hand with no mixing or tools. Pads are firestop tested up to 4 hours. read less

Pliable, Conformable and Shapeable for Exacting CoverageFor applications requiring conformable cover...150 read more

Pliable, Conformable and Shapeable for Exacting CoverageFor applications requiring conformable coverage, these pliable 3M™ Fire Barrier Moldable Putty Pads MPP+ meet a full range of firestop needs that would be impractical with strips, wraps or rolls. Ready to use in convenient 1/10” (2.54 mm) thick pads, this firestop material is designed for excellent adhesion to most construction substrates and is non-corrosive when applied to metal – ideal for use with listed steel or plastic electrical outlet boxes. It is also safe for applications including synthetic cable jackets, making it suitable for firestopping cable bundles. It won’t crumble or dry out, exhibits excellent aging properties and is re-enterable to save time and money after installation. And the pads are extremely simple and cost-effective to install: technicians mold the material by hand directly onto the substrate without mixing or tools. For larger applications, self-adhering pads can be molded together.Recommended Applications Protection of membrane penetrations for listed metallic and non-metallic electrical boxes Wall opening protective to meet building requirements Seal gaps between cables in multiple penetrations (including fiber optic inner duct) Insulated pipe, electrical conduit and metal pipe penetrationsFully Tested and ApprovedThe intumescent 3M™ Fire Barrier Moldable Putty Pads MPP+ are firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479). They are tested in accordance with ASTM E 119 (UL 263) up to 2 hours when installed in accordance with the UL wall-opening protective listing (UL Category CLIV), and help reduce noise transfer (STC-Rating of 52 when tested on back-to-back electrical boxes).Reliable and Affordable Fire ProtectionEffective and easy to install, 3M™ Fire Barrier Moldable Putty Pads MPP+ are part of 3M's family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

3M™ Fire Barrier Pillows are self-contained, intumescent products designed for use in through-penetration firestops, providing up to 3 hours of protection. This fire barrier pillow expands to form a hard char that tightly seals against flame spread, smoke and toxic gases. We also engineered this product to be re-enterable and re-useable for new or retrofit installations.

3M™ Fire Barrier Pillows are self-contained, intumescent products designed for use in through-penetration firestops, providing up to 3 hours of protection. This fire barrier pillow expands to form a hard char that tightly seals against flame spread, smoke and toxic gases. We also engineered this product to be re-enterable and re-useable for new or retrofit installations. read less

Designed for Fire Protection and PreventionOffering up to 3 hours of protection, 3M™ Fire Barr...150 read more

Designed for Fire Protection and PreventionOffering up to 3 hours of protection, 3M™ Fire Barrier Pillows are self-contained, intumescent products designed for use in through-penetration firestops, such as cable trays, conduit and blank openings. During a fire, 3M™ Fire Barrier Pillows intumesce (expand) and lock themselves into place, surrounding the penetrant(s) to help prevent the spread of smoke, fire and toxic gases. These fire pillows are easy to install and do not require mesh wire. They are ideal for projects requiring re-enterability of a firestop system, simply remove and replace pillows as needed. 3M designed this product with graphite-free composition, which does not conduct electricity. Additionally, these fire protection pillows have excellent aging properties, providing long-lasting durability and performance.Recommended Applications3M™ Fire Barrier Pillows achieve fire resistance for up to 3 hours and are used for through-penetration firestop applications such as: Cable trays Conduit openings Blank openingsTop-Quality Fire Stop3M™ Fire Barrier Pillows are a part of our comprehensive line of top-quality fire stop and fire prevention products. 3M has proven to be a leader in fire protection products, which are used around the world to help protect people, equipment and buildings. Using science and innovation, 3M helps limit the devastating effects of fire with products like 3M™ Fire Barrier Pillows. Enjoy the confidence and security that comes from a product that has exceptional and proven fire protection performance. read less

Our 3M™ Fire Barrier Water Tight Sealant 1000 NS is a ready-to-use, single component, neutral cure, silicone sealant that cures upon exposure to atmospheric humidity to form a flexible firestop seal. Our water tight sealants help control the spread of fire, smoke and noxious gases before, during and after exposure to fire.

Our 3M™ Fire Barrier Water Tight Sealant 1000 NS is a ready-to-use, single component, neutral cure, silicone sealant that cures upon exposure to atmospheric humidity to form a flexible firestop seal. Our water tight sealants help control the spread of fire, smoke and noxious gases before, during and after exposure to fire. read less

Formulated for Sealed Protection3M™ Fire Barrier Water Tight Sealant 1000 NS is formulated as...150 read more

Formulated for Sealed Protection3M™ Fire Barrier Water Tight Sealant 1000 NS is formulated as a single component, neutral cure, silicone sealant. This ready-to-use sealant cures upon exposure to atmospheric humidity to form a flexible firestop seal that helps control the spread of fire, smoke and noxious gases before, during and after exposure to fire. When properly installed, this water tight sealant provides up to 3-hour protection in tested and listed systems and meets UL Water Leakage Test, W Rating - Class 1 requirements for systems tested and listed in accordance with ANSI/UL 1479. We designed this non-slump firestop sealant as a re-enterable and repairable solution primarily used on vertical surfaces.Recommended Applications Dynamic and static construction joints Perimeter fire barrier system and curtain wall joints Firestop blank openings Penetrating items that pass through fire-rated floor or wall assembliesMeets Industry DemandsA durable solution, 3M™ Fire Barrier Water Tight Sealant 1000 NS is halogen-free, provides an excellent caulk rate and offers exceptional weatherability. This elastomeric sealant offers compression and extension capability of ±31% for dynamic and static construction joints. In addition, we formulated this sealant to be paintable with primer and compatible with CPVC piping.This product also provides acoustic benefits by minimizing noise transfer (STC-Rating of 56 when tested in a STC 56-rated wall assembly) and acts as a smoke seal for installations requiring the L-Rating. This sealant meets the intent of LEED® VOC environmental regulations, International Building Code (IBC) and other key life safety building code requirements.All-In-One Sealant SolutionFor a sealant ready to shield and protect from both water and fire, look no further than 3M™ Fire Barrier Water Tight Sealant 1000NS. This water tight sealant meets both UL 1479 (ASTM E 814) firestop tests and UL W-Rating for water tightness when used on floor penetrations. Discover the benefits of an all-in-one solution for water infiltration and fire containment.Reliable and Affordable Fire ProtectionEffective and easy to install, 3M™ Fire Barrier Water Tight Sealant 1000 NS is part of 3M's family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

Our 3M™ Fire Barrier Plastic Pipe Device is designed for 6" non-metallic pipe in new and retrofit through penetration installations. This one-piece metal collar assembly is designed to fit smoothly around the pipe with no assembly required, and provides anchor tabs for stability. It is firestop tested up to 2 hours in tested and listed systems.

Our 3M™ Fire Barrier Plastic Pipe Device is designed for 6" non-metallic pipe in new and retrofit through penetration installations. This one-piece metal collar assembly is designed to fit smoothly around the pipe with no assembly required, and provides anchor tabs for stability. It is firestop tested up to 2 hours in tested and listed systems. read less

A Quick Fit for Durable Firestop ProtectionIncorporates 3M™ Fire Barrier Wrap Strip FS-195+ and is s...150 read more

A Quick Fit for Durable Firestop ProtectionIncorporates 3M™ Fire Barrier Wrap Strip FS-195+ and is specifically designed to be a firestop for non-metalic, 6 pipe penetrations. This one-piece metal collar is built to fit securely around the firestop wrap strips – no additional assembly is required. Tested for up to 2 hours of fire protection in tested and listed systems, the device holds firestop material in place and helps ensure proper closure during fire. Metal tabs make for fast, easy anchoring to wall or floor slabs with common tools and hardware such as toggle bolts for gypsum or masonry anchors for concrete. (Hardware sold separately.) The result is a permanent, fixed firestop that also contributes to the structural stability of the penetration.Recommended ApplicationsFor installing firestop around 6" non-metallic pipe in new and retrofit through penetration installationsIn conjunction with 3M™ Fire Barrier Wrap Strip FS-195+The Science of Better Fire Protection from 3MSince 1925 when one a lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each 3M adhesive, sealant, protective coating, along with the best ways to use them – including 3M™ Fire Barrier Plastic Pipe Device – to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less

Our 3M™ Fire Barrier Plastic Pipe Device is designed for 6" non-metallic pipe in new and retrofit through penetration installations. This one-piece metal collar assembly is designed to fit smoothly around the pipe with no assembly required, and provides anchor tabs for stability. It is firestop tested up to 2 hours in tested and listed systems.

Our 3M™ Fire Barrier Plastic Pipe Device is designed for 6" non-metallic pipe in new and retrofit through penetration installations. This one-piece metal collar assembly is designed to fit smoothly around the pipe with no assembly required, and provides anchor tabs for stability. It is firestop tested up to 2 hours in tested and listed systems. read less

A Quick Fit for Durable Firestop ProtectionIncorporates 3M™ Fire Barrier Wrap Strip FS-195+ and is s...150 read more

A Quick Fit for Durable Firestop ProtectionIncorporates 3M™ Fire Barrier Wrap Strip FS-195+ and is specifically designed to be a firestop for non-metalic, 6 pipe penetrations. This one-piece metal collar is built to fit securely around the firestop wrap strips – no additional assembly is required. Tested for up to 2 hours of fire protection in tested and listed systems, the device holds firestop material in place and helps ensure proper closure during fire. Metal tabs make for fast, easy anchoring to wall or floor slabs with common tools and hardware such as toggle bolts for gypsum or masonry anchors for concrete. (Hardware sold separately.) The result is a permanent, fixed firestop that also contributes to the structural stability of the penetration.Recommended ApplicationsFor installing firestop around 6" non-metallic pipe in new and retrofit through penetration installationsIn conjunction with 3M™ Fire Barrier Wrap Strip FS-195+The Science of Better Fire Protection from 3MSince 1925 when one a lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each 3M adhesive, sealant, protective coating, along with the best ways to use them – including 3M™ Fire Barrier Plastic Pipe Device – to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less