Products
$256.69 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe instal...150
3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe installation tool, silicone lubricant, cold shrink jacketing tube, mastic strips, ground braid assembly, constant force spring and CC 3 cable cleaning pads. This kit is rated for 5 to 15 kV, 200 amp applications. Meets ANSI/IEEE Standard 386.
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Cold shrink tube seals from the bottom of the elbow to the cable jacket
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Cold shrink tube seals from the bottom of the elbow to the cable jacket
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- UPC
- 054007047681
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 200 A
- Size:
- 1 AWG; 2 AWG
- Type:
- Elbow
- Voltage Rating:
- 15,000 V
- Amperage Rating:
- 200 A
- Insulation:
- 1
- Insulation Diameter Range:
- 0.630-0.820 in
- Size:
- 1 AWG; 2 AWG
- Type:
- Elbow
- Voltage Rating:
- 15,000 V
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that com...
$256.69 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$256.69 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe instal...150
3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe installation tool, silicone lubricant, cold shrink jacketing tube, mastic strips, ground braid assembly, constant force spring and CC 3 cable cleaning pads. This kit is rated for 5 to 15 kV, 200 amp applications. Meets ANSI/IEEE Standard 386.
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Cold shrink tube seals from the bottom of the elbow to the cable jacket
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Cold shrink tube seals from the bottom of the elbow to the cable jacket
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- UPC
- 054007048138
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 200 A
- Size:
- 2 AWG
- Type:
- Elbow
- Voltage Rating:
- 15,000 V
- Amperage Rating:
- 200 A
- Insulation:
- 100%; 133%
- Size:
- 2 AWG
- Type:
- Elbow
- Voltage Rating:
- 15,000 V
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that com...
$256.69 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$245.42 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe instal...150
3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe installation tool, silicone lubricant, cold shrink jacketing tube, mastic strips, ground braid assembly, constant force spring and CC 3 cable cleaning pads. This kit is rated for 5 to 15 kV, 200 amp applications. Meets ANSI/IEEE Standard 386.
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Cold shrink tube seals from the bottom of the elbow to the cable jacket
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Cold shrink tube seals from the bottom of the elbow to the cable jacket
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- UPC
- 054007047728
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 200 A
- Size:
- 1 AWG; 1/0 AWG
- Type:
- Elbow
- Voltage Rating:
- 15,000 V
- Amperage Rating:
- 200 A
- Insulation:
- 1.33
- Size:
- 1 AWG; 1/0 AWG
- Type:
- Elbow
- Voltage Rating:
- 15,000 V
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that com...
$245.42 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$245.42 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe instal...150
3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe installation tool, silicone lubricant, cold shrink jacketing tube, mastic strips, ground braid assembly, constant force spring and CC 3 cable cleaning pads. This kit is rated for 5 to 15 kV, 200 amp applications. Meets ANSI/IEEE Standard 386.
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Cold shrink tube seals from the bottom of the elbow to the cable jacket
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Cold shrink tube seals from the bottom of the elbow to the cable jacket
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- UPC
- 054007047742
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 200 A
- Size:
- 1 AWG; 2 AWG
- Type:
- Elbow
- Voltage Rating:
- 15,000 V
- Amperage Rating:
- 200 A
- Insulation:
- 1.33
- Size:
- 1 AWG; 2 AWG
- Type:
- Elbow
- Voltage Rating:
- 15,000 V
3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that com...
$245.42 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$261.58 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Industrial Insulated Protective Cap Kit is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing interfaces. The protective cap is used for permanent or temporary installation on bushings, junctions or feed thru devices. This kit is 15 kV voltage rated and 200 amp current rated.
3M™ Industrial Insulated Protective Cap Kit is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing interfaces. The protective cap is used for permanent or temporary installation on bushings, junctions or feed thru devices. This kit is 15 kV voltage rated and 200 amp current rated.
3M™ Industrial Insulated Protective Cap Kit includes an insulated protective cap with stranded coppe...150
3M™ Industrial Insulated Protective Cap Kit includes an insulated protective cap with stranded copper ground wire, silicone lubricant and an installation instruction sheet. The protective cap offers a fully shielded insulating cover for energized bushings that meet the requirements of ANS/IEEE Standard 386.
- Electrically insulates and mechanically seals loadbreak bushing interfaces
- Provides fully shielded, insulating cover for energized bushings
- Suitable for permanent or temporary installation on bushings, junctions or feed-thru devices
- Meets ANSI/IEEE Standard 386 requirement
- Electrically insulates and mechanically seals loadbreak bushing interfaces
- Provides fully shielded, insulating cover for energized bushings
- Suitable for permanent or temporary installation on bushings, junctions or feed-thru devices
- Meets ANSI/IEEE Standard 386 requirement
- UPC
- 054007437772
- UNSPSC
- 39121450
- Country of Origin
- USA
3M™ Industrial Insulated Protective Cap Kit is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing interfaces. The protective cap is used for permanent or tem...
$261.58 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$345.66 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5811 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe instal...150
3M™ 5811 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe installation tool, silicone lubricant, cold shrink jacketing tube, mastic strips, ground braid assembly, constant force spring, 3M Cable Cleaning Pads CC 3 and installation instructions. This kit is rated for 25 kV and 200 amp applications. The copper top compression connector transitions from the cable to the loadbreak probe. The aluminum barrel of the elbow makes the connector easy to crimp on both aluminum and copper conductors. The copper lug ensures a reliable, tight, cool operating connection with the loadbreak probe. Meets ANSI/IEEE Standard 386.
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Locking ring ensures secure connection
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Locking ring ensures secure connection
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- UPC
- 054007435884
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 200 A
- Size:
- 1 AWG; 2 AWG
- Type:
- Elbow
- Voltage Rating:
- 25,000 V
- Amperage Rating:
- 200 A
- Insulation:
- 1
- Size:
- 1 AWG; 2 AWG
- Type:
- Elbow
- Voltage Rating:
- 25,000 V
3M™ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that...
$345.66 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$345.66 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5811 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe instal...150
3M™ 5811 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe installation tool, silicone lubricant, cold shrink jacketing tube, mastic strips, ground braid assembly, constant force spring, 3M Cable Cleaning Pads CC 3 and installation instructions. This kit is rated for 25 kV and 200 amp applications. The copper top compression connector transitions from the cable to the loadbreak probe. The aluminum barrel of the elbow makes the connector easy to crimp on both aluminum and copper conductors. The copper lug ensures a reliable, tight, cool operating connection with the loadbreak probe. Meets ANSI/IEEE Standard 386.
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Locking ring ensures secure connection
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Locking ring ensures secure connection
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- UPC
- 054007435921
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 200 A
- Size:
- 1 AWG; 1/0 AWG
- Type:
- Elbow
- Voltage Rating:
- 25,000 V
- Amperage Rating:
- 200 A
- Insulation:
- 100%; 133%
- Insulation Diameter Range:
- 0.850-1.100 in
- Size:
- 1 AWG; 1/0 AWG
- Type:
- Elbow
- Voltage Rating:
- 25,000 V
3M™ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that...
$345.66 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$345.66 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.
3M™ 5811 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe instal...150
3M™ 5811 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe installation tool, silicone lubricant, cold shrink jacketing tube, mastic strips, ground braid assembly, constant force spring, 3M Cable Cleaning Pads CC 3 and installation instructions. This kit is rated for 25 kV and 200 amp applications. The copper top compression connector transitions from the cable to the loadbreak probe. The aluminum barrel of the elbow makes the connector easy to crimp on both aluminum and copper conductors. The copper lug ensures a reliable, tight, cool operating connection with the loadbreak probe. Meets ANSI/IEEE Standard 386.
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Locking ring ensures secure connection
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
- Locking ring ensures secure connection
- Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
- High-quality, peroxide-cured EPDM provides better insulation
- UPC
- 054007435914
- UNSPSC
- 39121450
- Country of Origin
- USA
- Amperage Rating:
- 200 A
- Type:
- Elbow
- Voltage Rating:
- 25,000 V
- Amperage Rating:
- 200 A
- Type:
- Elbow
- Voltage Rating:
- 25,000 V
3M™ 5811 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated plug in termination. This kit is ideal for connecting underground cable to transformers, switchgear and junctions that...
$345.66 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders