Products
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
- Certification Agency
- PROP65
- Certification Number
- WARNING: This product contains material that, the State of California has determined, may cause cancer and reproductive harm. ADVERTENCIA: Càncer y Daño Reproductivo. AVERTISSEMENT: Cancer et Effet Nocif Sur la Reproduction. www.p65warnings.ca.gov
$105.68 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
MADISON, 3-1/2" RIGID x 22-1/2° ELBOW 3-1/2" RIGID x 22-1/2° ELBOW PROVIDES A CHANGE IN DIRECTION IN A CONDUIT RUN
MADISON, 3-1/2" RIGID x 22-1/2° ELBOW 3-1/2" RIGID x 22-1/2° ELBOW PROVIDES A CHANGE IN DIRECTION IN A CONDUIT RUN
- UPC
- 784297018503
- UNSPSC
- 39131717
- Country of Origin
- CHN
MADISON, 3-1/2" RIGID x 22-1/2° ELBOW 3-1/2" RIGID x 22-1/2° ELBOW PROVIDES A CHANGE IN DIRECTION IN A CONDUIT RUN
$105.68 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$8.93 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
2" Schedule 40 PVC 90� Bell End Elbows
2" Schedule 40 PVC 90� Bell End Elbows
Enable fast, easy and secure 90�directional changes in conduit runs and allow for design configurati...150
Enable fast, easy and secure 90�directional changes in conduit runs and allow for design configuration changes with Topaz�s Schedule 40 PVC 90� Bell End Elbows. A standard conduit bell comprises one end of elbow with the opposite finished in a spigot or plain end. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2� to 6.�
- A section of Schedule 40 PVC conduit which has been heated and bent to enable a 90� directional change in a conduit run
- A standard conduit bell is formed on one end while the other end is a spigot(plain) end
- Both ends are solvent weld
- A section of Schedule 40 PVC conduit which has been heated and bent to enable a 90� directional change in a conduit run
- A standard conduit bell is formed on one end while the other end is a spigot(plain) end
- Both ends are solvent weld
- UPC
- 751338231696
- UNSPSC
- 39131717
- Country of Origin
- MUL
- Material:
- PVC
- Size:
- 2 IN
- Type:
- 90 DEG Elbow
- Bend Radius:
- 9.50 IN
- Installation Type:
- Compression
- Label Description:
- 90° BELL END ELBOW
- Material:
- PVC
- Size:
- 2 IN
- Size (IN):
- 2" IN
- Size (trade) (IN):
- 2 IN
- Standard:
- UL E170258, UL 514B, Federal Specification A-A-50563, NEMA/ANSI FB-1, Military Specification W-F-406D, W-F-406E, W-F-408D, W-S-610D
- Trade Size:
- 2 in
- Type:
- 90 DEG Elbow
- Wall Thickness:
- Schedule 40
2" Schedule 40 PVC 90� Bell End Elbows
$8.93 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$90.95 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
6" SCHEDULE 40 PVC 45 DEGREE BELL END ELBOWS
6" SCHEDULE 40 PVC 45 DEGREE BELL END ELBOWS
150
- UPC
- 751338231870
- UNSPSC
- 39131717
- Country of Origin
- MUL
6" SCHEDULE 40 PVC 45 DEGREE BELL END ELBOWS
$90.95 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$7.22 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1-1/2" Schedule 40 PVC 45� Bell End Elbows
1-1/2" Schedule 40 PVC 45� Bell End Elbows
Enable fast, easy and secure 45�directional changes in conduit runs and allow for design configurati...150
Enable fast, easy and secure 45�directional changes in conduit runs and allow for design configuration changes with Topaz�s Schedule 40 PVC 45� Bell End Elbows. A standard conduit bell comprises one end of elbow with the opposite finished in a spigot or plain end. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2� to 6.�
- A section of Schedule 40 PVC conduit which has been heated and bent to enable a 45� directional change in a conduit run
- A standard conduit bell is formed on one end while the other end is a spigot (plain) end
- Both ends are solvent weld
- A section of Schedule 40 PVC conduit which has been heated and bent to enable a 45� directional change in a conduit run
- A standard conduit bell is formed on one end while the other end is a spigot (plain) end
- Both ends are solvent weld
- UPC
- 751338233751
- UNSPSC
- 39131717
- Country of Origin
- MUL
- Material:
- PVC
- Size:
- 1-1/2 IN
- Type:
- 45 DEG Elbow
- Bend Radius:
- 8.25 IN
- Installation Type:
- Compression
- Label Description:
- 45° BELL END ELBOW
- Material:
- PVC
- Size:
- 1-1/2 IN
- Size (IN):
- 1-1/2" IN
- Size (trade) (IN):
- 1-1/2 IN
- Standard:
- UL E170258, UL 514B, Federal Specification A-A-50563, NEMA/ANSI FB-1, Military Specification Number W-F-406D, W-F-406E, W-F-408D, W-S-610D
- Trade Size:
- 1.5 in
- Type:
- 45 DEG Elbow
- Wall Thickness:
- Schedule 40
1-1/2" Schedule 40 PVC 45� Bell End Elbows
$7.22 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$16.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1-1/4" Rigid 15� Elbow
1-1/4" Rigid 15� Elbow
Topaz�s Rigid 15� elbow is precision manufactured to deliver optimum safety and performance. Fabrica...150
Topaz�s Rigid 15� elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1-1/4� to 4�; HDG, UL listed, meets Federal specification WW-C-563.
- Low conductivity, high corrosion resistance
- Smooth defect free interior and exterior
- Low conductivity, high corrosion resistance
- Smooth defect free interior and exterior
- UPC
- 751338839175
- UNSPSC
- 39131717
- Country of Origin
- MUL
- Material:
- Steel
- Size:
- 1-1/4 IN
- Type:
- 15 DEG Elbow
- Bend Radius:
- 7.25 IN
- Connection:
- Male Threaded
- Connectors (IN):
- Male Threaded IN
- Finish:
- Galvanized
- Flexibility:
- Rigid Conduit
- Installation Type:
- Threaded
- Label Description:
- RIGID ELBOW 15°
- Material:
- Steel
- Size:
- 1-1/4 IN
- Size (IN):
- 1-1/4" IN
- Size (trade) (IN):
- 1-1/4 IN
- Standard:
- UL E223147, CSA Certified, UL6, ANSI C80.1, UL 514B, Federal Specification A-A-50553, WW-C-563, NEMA/ANSI FB-1, Military Specification Number W-F-406D, W-F-406E, W-F-408D, W-S-610D
- Trade Size:
- 1.25 in
- Type:
- 15 DEG Elbow
1-1/4" Rigid 15� Elbow
$16.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$112.00 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
5" x 90� x 36" Schedule 40 PVC Special Radius Elbows
5" x 90� x 36" Schedule 40 PVC Special Radius Elbows
Designed to enable connections between straight lengths of pipe and accommodate almost any design co...150
Designed to enable connections between straight lengths of pipe and accommodate almost any design configuration change,Topaz�s carries one of the largest selections of Schedule 40 PVC Special Radius Elbows. Manufactured from rugged, noncorrosive and nonconductive PVC, the elbow is cleanly finished with two plain, spigot ends. Suitable for above or below ground use; cULus approved.
- Cleanly finished with plain spigot(plain) ends
- High tensile and impact strength
- Cleanly finished with plain spigot (plain) ends
- High tensile and impact strength
- Cleanly finished with plain spigot(plain) ends
- High tensile and impact strength
- Cleanly finished with plain spigot (plain) ends
- High tensile and impact strength
- UPC
- 751338500914
- UNSPSC
- 39131717
- Country of Origin
- MUL
- Label Description:
- PVC SPECIAL RADIUS ELBOW
- Size (IN):
- 5" X 90° X 36" IN
5" x 90� x 36" Schedule 40 PVC Special Radius Elbows
$112.00 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
- Certification Agency
- PROP65
- Certification Number
- WARNING: This product contains material that, the State of California has determined, may cause cancer and reproductive harm. ADVERTENCIA: Càncer y Daño Reproductivo. AVERTISSEMENT: Cancer et Effet Nocif Sur la Reproduction. www.p65warnings.ca.gov
$29.92 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
MADISON, 2" RIGID x 11-1/4° ELBOW 2" RIGID x 11-1/4° ELBOW PROVIDES A CHANGE OF DIRECTION IN A CONDUIT RUN
MADISON, 2" RIGID x 11-1/4° ELBOW 2" RIGID x 11-1/4° ELBOW PROVIDES A CHANGE OF DIRECTION IN A CONDUIT RUN
- UPC
- 784297018459
- UNSPSC
- 39131717
- Country of Origin
- CHN
MADISON, 2" RIGID x 11-1/4° ELBOW 2" RIGID x 11-1/4° ELBOW PROVIDES A CHANGE OF DIRECTION IN A CONDUIT RUN
$29.92 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$51.76 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
2x90x24 Schedule 80 Special Radius PVS Elbows
2x90x24 Schedule 80 Special Radius PVS Elbows
Make a secure connection with Topaz�s Schedule 80 Special Radius PVC Elbows. Fabricated from heavy d...150
Make a secure connection with Topaz�s Schedule 80 Special Radius PVC Elbows. Fabricated from heavy duty PVC with superior weather-resistant characteristics to withstand damage from UV rays, moisture and corrosive elements. Elbows are manufactured with 2 plain ends for indoor and outdoor use; cULus approved in sizes from 1/2� to 6.�
- Hight tensile and impact strength
- Resistant to damage from moisture and corrosive materials
- Industrial strength; superior weather resistant characteristics help rebuff elemental damage
- Hight tensile and impact strength
- Resistant to damage from moisture and corrosive materials
- Industrial strength; superior weather resistant characteristics help rebuff elemental damage
- UPC
- 751338850460
- UNSPSC
- 39131717
- Country of Origin
- MUL
- Label Description:
- PVC SCHEDULE RADIUS ELBOW
- Size (IN):
- 2" X 90° X 24" IN
2x90x24 Schedule 80 Special Radius PVS Elbows
$51.76 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders