3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions.

3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions. read less

Each kit contains sufficient quantities of material to make three single-phase terminations. The ter...150 read more

Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note:Lugs need to be ordered separately. Exceptions:For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only. read less

3M™ 5411/5412 Series Molded Rubber QS II Splice Kit is a 1 piece inline splice designed to use on 15kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. The cold shrink jacket has peroxide cured EPDM rubber construction to ensure moisture resistance and durability.

3M™ 5411/5412 Series Molded Rubber QS II Splice Kit is a 1 piece inline splice designed to use on 15kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. The cold shrink jacket has peroxide cured EPDM rubber construction to ensure moisture resistance and durability. read less

3M™ 5411/5412 Series Molded Rubber QS II Splice Kit is suitable to use on cables that can withstand...150 read more

3M™ 5411/5412 Series Molded Rubber QS II Splice Kit is suitable to use on cables that can withstand a maximum temperature of 90 °C. It provides an electric connection of outer conducting jacket to a cable semi conductive jacket. The kit meets the requirements of IEEE 404 standards. read less

3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Cable Splices 5775A-MT, 5776A-MT and 5777A-MT Series are designed for splicing 3-conductor, armored and non-armored, shielded power cables. The kits are rated for use on 5/8 kV cables with conductor sizes from 3/0 AWG-1000 kcmil (95-500 mm²) or 15 kV cables with conductor sizes from 2 AWG-750 kcmil (35-325 mm²).

3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Cable Splices 5775A-MT, 5776A-MT and 5777A-MT Series are designed for splicing 3-conductor, armored and non-armored, shielded power cables. The kits are rated for use on 5/8 kV cables with conductor sizes from 3/0 AWG-1000 kcmil (95-500 mm²) or 15 kV cables with conductor sizes from 2 AWG-750 kcmil (35-325 mm²). read less

The kits are designed to be used with 3M™ Scotchlok™ Connectors 10000 and 20000 Series or other UL l...150 read more

The kits are designed to be used with 3M™ Scotchlok™ Connectors 10000 and 20000 Series or other UL listed inline compression connectors that fit within the dimension limits listed in the data sheet. Meets the requirements of IEEE-404.Kits include material necessary to make one 3/C splice. Connectors are not included and must be ordered separately. The completed splice is designed for use in cable trays, weather exposed or direct burial locations. The splice utilizes several technologies to accommodate the various functions of a 3/C shielded power cable: 3M™ Cold Shrink QS-III Splice Bodies, Scotch® Tapes for moisture sealing, Constant Force Springs for connecting ground braid jumpers and armorcast for replacing the cable armor and/or jacket.Note: When making a trifurcating splice, the 3M™ Cold Shrink MT-C or MT-E Trifurcating Accessory Kit must be used along with the splice kit.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D. read less

Nylon Insulated Double Crimp Bullet Disconnects - 12-10 Wire, .197 Bullet - Restock your Nylon Insulated Double Crimp Bullet Disconnectors here.Nylon Insulated Double Crimp Bullet Disconnects - 12-10 Wire, .197 Bullet features include: Nylon Insulated Bullet Disconnects in .197 diameter Color Coded Insulation for easy identification Manufactured from High Strength Brass Electro-Tin Plated for corrosion resistance Easy Entry Expanded Insulation eliminates strand ldquo;Hang Up, increasing crimpi... read more

Nylon Insulated Double Crimp Bullet Disconnects - 12-10 Wire, .197 Bullet - Restock your Nylon Insulated Double Crimp Bullet Disconnectors here.Nylon Insulated Double Crimp Bullet Disconnects - 12-10 Wire, .197 Bullet features include: Nylon Insulated Bullet Disconnects in .197 diameter Color Coded Insulation for easy identification Manufactured from High Strength Brass Electro-Tin Plated for corrosion resistance Easy Entry Expanded Insulation eliminates strand ldquo;Hang Up, increasing crimping rates and provides mechanical strain relief Terminal Barrel has Butted Seam Serrated Barrel provides excellent electrical contact resistance to pull-out forces Double Crimp Extended Crimp Sleeve provides for multiple crimps resulting in improved electrical contact and pull-out force resistance 221deg;F (105deg;C) 600 Volts Max Maximum Electric Current: 22 AWG - 3 Amp, 20 AWG - 4 Amp, 18 AWG - 7 Amp, 16 AWG - 10 Amp, 14 AWG - 15 Amp, 12 AWG - 20 Amp, 10 AWG - 24 Amp cULus Listed Dimension Measurements = Inches Order Qty of 100 = 1 Bag of 100 Below is more info on our Nylon Insulated Double Crimp Bullet Disconnects - 12-10 Wire, .197 Bullet read less

150

read less

Nylon Insulated Flange Fork/Spade Terminals - 16-14 Wire, #6 Stud - Our Nylon Insulated Flange Fork/Spade Terminals combine quality and economy.Nylon Insulated Flange Fork/Spade Terminals - 16-14 Wire, #6 Stud features include: Flanged Fork/Spade Terminals are Nylon Insulated Color Coded insulation for easy identification Manufactured from High Strength Electrolytic Copper Alloy Electro-Tin Plated for corrosion resistance Easy Entry Expanded Insulation eliminates strand ldquo;Hang Up, increasin... read more

Nylon Insulated Flange Fork/Spade Terminals - 16-14 Wire, #6 Stud - Our Nylon Insulated Flange Fork/Spade Terminals combine quality and economy.Nylon Insulated Flange Fork/Spade Terminals - 16-14 Wire, #6 Stud features include: Flanged Fork/Spade Terminals are Nylon Insulated Color Coded insulation for easy identification Manufactured from High Strength Electrolytic Copper Alloy Electro-Tin Plated for corrosion resistance Easy Entry Expanded Insulation eliminates strand ldquo;Hang Up, increasing crimping rates and provides mechanical strain relief Wire range stamped on the surface for easy interpretation Terminal Barrel has Brazed Seam Serrated Barrel provides excellent electrical contact resistance to pull-out forces Flanged Configuration of Tang ensures a Positive Lock to terminal base increasing pull-out force resistance 221deg;F (105deg;C) 600 Volts Max Maximum Electric Current: 22 AWG - 9 Amp, 20 AWG - 12 Amp, 18 AWG - 17 Amp, 16 AWG - 18 Amp, 14 AWG - 30 Amp, 12 AWG - 35 Amp, 10 AWG - 50 Amp cULus Listed Order Qty of 100 = 1 Bag of 100 Below is more info on our Nylon Insulated Flange Fork/Spade Terminals - 16-14 Wire, #6 Stud read less

150

read less

#18 - #10 Non-Insulated Copper Crimp Sleeve Crimp Connectors - Our Copper Crimp Sleeves hold Wire firmly in place.#18 - #10 Non-Insulated Copper Crimp Sleeve features include: Electrolytic Copper Tubular Sleeve Use Wire Crimp Sleeve connectors in light fixtures, appliances and other electrical OEM applications Compact design fits easily into tight locations Flared skirt protects against splayed strands Beveled opening eases wire entry Simply twist conductors together and crimp UL 486C and CSA C... read more

#18 - #10 Non-Insulated Copper Crimp Sleeve Crimp Connectors - Our Copper Crimp Sleeves hold Wire firmly in place.#18 - #10 Non-Insulated Copper Crimp Sleeve features include: Electrolytic Copper Tubular Sleeve Use Wire Crimp Sleeve connectors in light fixtures, appliances and other electrical OEM applications Compact design fits easily into tight locations Flared skirt protects against splayed strands Beveled opening eases wire entry Simply twist conductors together and crimp UL 486C and CSA C22.2 #188 Listed (Bag 100 Pack) Order Qty of 1 = 1 Bag of 100 Below is more info on our #18 - #10 Non-Insulated Copper Crimp Sleeve Connectors read less

150

read less

Non-Insulated Ring Terminals - 4awg Wire, 3/8" Stud - Non-Insulated Wiring Terminals for electrical work.Non-Insulated Ring Terminals - 4awg Wire, 3/8" Stud features include: Non-Insulated Ring Terminal Material: High Strength Electro-Tin Plated Copper Brazed Seam Serrated Barrel with Brazed Seam provides Excellent Electrical Contact resistance to pull-out forces Maximum Electrical Current: 22 AWG - 9 Amp, 20 AWG - 12 Amp, 18 AWG - 17 Amp, 16 AWG - 18 Amp, 14 AWG - 30 Amp, 12 AWG - 35 Amp, 10 A... read more

Non-Insulated Ring Terminals - 4awg Wire, 3/8" Stud - Non-Insulated Wiring Terminals for electrical work.Non-Insulated Ring Terminals - 4awg Wire, 3/8" Stud features include: Non-Insulated Ring Terminal Material: High Strength Electro-Tin Plated Copper Brazed Seam Serrated Barrel with Brazed Seam provides Excellent Electrical Contact resistance to pull-out forces Maximum Electrical Current: 22 AWG - 9 Amp, 20 AWG - 12 Amp, 18 AWG - 17 Amp, 16 AWG - 18 Amp, 14 AWG - 30 Amp, 12 AWG - 35 Amp, 10 AWG - 50 Amp, 8 AWG - 70 Amp, 6 AWG - 95 Amp, 4 AWG - 125 Amp, 2 AWG - 170 Amp 302deg;F(150deg;C) 600 Volts Max cULus Listed Dimension Measurements = Inches Order Qty of 100 = 1 Bag of 100 Below is more info on our Non-Insulated Ring Terminals - 4awg Wire, 3/8" Stud read less

150

read less

Vinyl Insulated Female Disconnects - 12-10 Wire, .032x.110 Tab - Female Vinyl Insulated Disconnectors for electrical work.Vinyl Insulated Female Disconnects - 12-10 Wire, .032x.110 Tab features include: Female Disconnects are Vinyl Insulated Color Coded insulation for easy identification Manufactured from High Strength Brass Electro-Tin Plated for corrosion resistance Easy Entry Expanded Insulation eliminates strand ldquo;Hang Up, increasing crimping rates and provides mechanical strain relief... read more

Vinyl Insulated Female Disconnects - 12-10 Wire, .032x.110 Tab - Female Vinyl Insulated Disconnectors for electrical work.Vinyl Insulated Female Disconnects - 12-10 Wire, .032x.110 Tab features include: Female Disconnects are Vinyl Insulated Color Coded insulation for easy identification Manufactured from High Strength Brass Electro-Tin Plated for corrosion resistance Easy Entry Expanded Insulation eliminates strand ldquo;Hang Up, increasing crimping rates and provides mechanical strain relief Wire range stamped on the surface for easy interpretation Terminal Barrel has Butted Seam Serrated Barrel provides excellent electrical contact resistance to pull-out forces 167deg;F (75deg;C) 300 Volts Max Maximum Electric Current: 22 AWG - 3 Amp, 20 AWG - 4 Amp, 18 AWG - 7 Amp, 16 AWG - 10 Amp, 14 AWG - 15 Amp, 12 AWG - 20 Amp, 10 AWG - 24 Amp cULus Listed Dimension Measurements = Inches Order Qty of 100 = 1 Bag of 100 Below is more info on our Vinyl Insulated Female Disconnects - 12-10 Wire, .032x.110 Tab read less

150

read less