Products
$691.91 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions.
3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions.
Each kit contains sufficient quantities of material to make three single-phase terminations. The ter...150
Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note:Lugs need to be ordered separately. Exceptions:For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only.
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for indoor applications
- Non-tracking, molded, silicone rubber insulation offers durability
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for indoor applications
- Non-tracking, molded, silicone rubber insulation offers durability
- UPC
- 051128574850
- UNSPSC
- 26121648
- Country of Origin
- USA
- Type:
- QT-III
- Voltage Rating:
- 5,000/8,000 V
- BIL:
- 95 kV
- Cable Insulation Outside Diameter Range:
- 1.05-1.80 in
- Cable Type:
- Tape Shield; UniShield(R); Wire Shield
- Conductor Size:
- 1000 kcmil; 1250 kcmil; 1500 kcmil; 600 kcmil; 700 kcmil; 750 kcmil; 800 kcmil; 900 kcmil
- Insulation Level:
- 100%; 133%
- Lug/Stem Connector Included in Kit:
- No
- Maximum Installed Length:
- 8.50 in
- Number Of Terminals:
- 1
- Standard:
- IEEE
- Type:
- QT-III
- Voltage Rating:
- 5,000/8,000 V
3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-pro...
$691.91 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$362.29 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5430 Series Molded Rubber QS Splice Kit is a 35kV inline splice designed to use on jacketed concentric neutral (JCN) and concentric neutral (CN) cables with copper or aluminum conductors. The jacketing kit is needed for JCN cable.
3M™ 5430 Series Molded Rubber QS Splice Kit is a 35kV inline splice designed to use on jacketed concentric neutral (JCN) and concentric neutral (CN) cables with copper or aluminum conductors. The jacketing kit is needed for JCN cable.
3M™ 5430 Series Molded Rubber QS II Splice Kit includes a splice body, 2 end caps, a packet of silic...150
3M™ 5430 Series Molded Rubber QS II Splice Kit includes a splice body, 2 end caps, a packet of silicone grease and instructions. The continuous current rating of each splice is the same as the current rating of the cable that it is sized to accommodate. The kit meets the requirements of IEEE 404 standards.
- Inline splice for use on jacketed concentric neutral (JCN) and concentric neutral (CN) cables
- Jacketing kit is required for JCN cable
- Rated for 35 kV cables
- Meets the requirements of IEEE 404 standards
- Inline splice for use on jacketed concentric neutral (JCN) and concentric neutral (CN) cables
- Jacketing kit is required for JCN cable
- Rated for 35 kV cables
- Meets the requirements of IEEE 404 standards
- UPC
- 054007312222
- UNSPSC
- 26121649
- Country of Origin
- USA
- Type:
- Inline
- Voltage Rating:
- 35,000 V
- Cable Type:
- Concentric Neutral (CN); Jacketed Concentric Neutral (JCN)
- Conductor Size:
- 1/0 AWG Stranded
- Connector:
- CI-1/0A
- Insulation OD Range:
- 1.060 - 1.210 Inch
- Number of Conductors:
- 1
- Product Technology:
- Molded Rubber
- Stranded Conductor Sizes:
- 1/0 AWG
- Type:
- Inline
- Voltage Rating:
- 35,000 V
3M™ 5430 Series Molded Rubber QS Splice Kit is a 35kV inline splice designed to use on jacketed concentric neutral (JCN) and concentric neutral (CN) cables with copper or aluminum conductors. The jack...
$362.29 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$764.40 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design.
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design.
The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbe...150
The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Each splice is high-voltage production tested to ensure reliability. Kits can be ordered with connectors packed in the kit or the kit and connector can be ordered as separate items. Meets requirements of IEEE 404.Each kit makes one splice.Note: 5456A-WG, 5457A-WG and 5458A-WG are partially jacketed splices containing built-in bleeder wires. Additional end user materials are required to convert to full jacketing.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
- Inline splice for joining jacketed concentric neutral (JCN) and concentric neutral (CN) power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, size transition splicing, direct burial installations, submerged locations and use with standard inline crimp connectors
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Inline splice for joining jacketed concentric neutral (JCN) and concentric neutral (CN) power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, size transition splicing, direct burial installations, submerged locations and use with standard inline crimp connectors
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- UPC
- 054007444039
- UNSPSC
- 26121649
- Country of Origin
- USA
- Type:
- Inline
- Voltage Rating:
- 15,000 V
- Cable Type:
- Concentric Neutral (CN); Jacketed Concentric Neutral (JCN)
- Conductor Material:
- Aluminum
- Conductor Size:
- 500 kcmil
- Connector:
- 20014
- Insulation OD Range:
- 1.08 - 1.70 Inch
- Number of Conductors:
- 1
- Product Technology:
- Cold Shrink
- Type:
- Inline
- Voltage Rating:
- 15,000 V
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It...
$764.40 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$764.40 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design.
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design.
The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbe...150
The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Each splice is high-voltage production tested to ensure reliability. Kits can be ordered with connectors packed in the kit or the kit and connector can be ordered as separate items. Meets requirements of IEEE 404.Each kit makes one splice.Note: 5456A-WG, 5457A-WG and 5458A-WG are partially jacketed splices containing built-in bleeder wires. Additional end user materials are required to convert to full jacketing.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
- Inline splice for joining jacketed concentric neutral (JCN) and concentric neutral (CN) power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, size transition splicing, direct burial installations, submerged locations and use with standard inline crimp connectors
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Inline splice for joining jacketed concentric neutral (JCN) and concentric neutral (CN) power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, size transition splicing, direct burial installations, submerged locations and use with standard inline crimp connectors
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- UPC
- 054007444046
- UNSPSC
- 26121649
- Country of Origin
- USA
- Type:
- Inline
- Voltage Rating:
- 15,000 V
- Cable Type:
- Concentric Neutral (CN); Jacketed Concentric Neutral (JCN)
- Conductor Material:
- Copper
- Conductor Size:
- 500 kcmil
- Connector:
- 10014
- Insulation OD Range:
- 1.08 - 1.70 Inch
- Number of Conductors:
- 1
- Product Technology:
- Cold Shrink
- Type:
- Inline
- Voltage Rating:
- 15,000 V
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It...
$764.40 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$1,533.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink QT III 7600 T 3G Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The silicone rubber sealing compounds allow the termination to withstand voltages of 5 to 35kV.
3M™ Cold Shrink QT III 7600 T 3G Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The silicone rubber sealing compounds allow the termination to withstand voltages of 5 to 35kV.
150
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for indoor applications
- Silicone rubber insulation offers durability and reduces leakage currents in damp conditions
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for indoor applications
- Silicone rubber insulation offers durability and reduces leakage currents in damp conditions
- UPC
- 054007436713
- UNSPSC
- 26121648
- Country of Origin
- USA
- Type:
- QT-III
- Voltage Rating:
- 5,000/8,000/15,000 V
- BIL:
- 110 kV
- Cable Insulation Outside Diameter Range:
- 0.92-1.18 in
- Cable Type:
- Tape Shield; UniShield(R); Wire Shield
- Conductor Size:
- 250 kcmil; 300 kcmil; 350 kcmil; 400 kcmil; 500 kcmil
- Lug/Stem Connector Included in Kit:
- No
- Maximum Installed Length:
- 12.00 in
- Number Of Terminals:
- 3
- Standard:
- IEEE
- Type:
- QT-III
- Voltage Rating:
- 5,000/8,000/15,000 V
3M™ Cold Shrink QT III 7600 T 3G Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The sili...
$1,533.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$1,485.64 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink QT III 7600 T 3W Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conjunction of high dielectric constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.
3M™ Cold Shrink QT III 7600 T 3W Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conjunction of high dielectric constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.
150
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for indoor applications and cabinet-mount installations
- Integrated design allows for easier installation in limited spaces, while sealing compounds provide constant radial pressure
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for indoor applications and cabinet-mount installations
- Integrated design allows for easier installation in limited spaces, while sealing compounds provide constant radial pressure
- UPC
- 054007047384
- UNSPSC
- 26121648
- Country of Origin
- USA
- Type:
- QT-III
- Voltage Rating:
- 5,000/8,000/15,000 V
- BIL:
- 110 kV
- Cable Insulation Outside Diameter Range:
- 0.92-1.18 in
- Cable Type:
- Tape Shield; UniShield(R); Wire Shield
- Conductor Size:
- 250 kcmil; 300 kcmil; 350 kcmil; 400 kcmil; 500 kcmil; 600 kcmil; 700 kcmil; 750 kcmil
- Lug/Stem Connector Included in Kit:
- No
- Maximum Installed Length:
- 12.00 in
- Number Of Terminals:
- 3
- Standard:
- AEIC; IEC; JIS
- Type:
- QT-III
- Voltage Rating:
- 5,000/8,000/15,000 V
3M™ Cold Shrink QT III 7600 T 3W Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conj...
$1,485.64 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$1,264.06 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Cold Shrink QT III 7600 S 3RJS Series Termination Kit includes a skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conjunction of high dielectric constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.
3M™ Cold Shrink QT III 7600 S 3RJS Series Termination Kit includes a skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conjunction of high dielectric constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.
150
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for outdoor applications and cabinet-mount installations
- Integrated design allows for easier installation, while sealing compounds provide constant radial pressure
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for outdoor applications and cabinet-mount installations
- Integrated design allows for easier installation, while sealing compounds provide constant radial pressure
- UPC
- 054007047254
- UNSPSC
- 26121648
- Country of Origin
- USA
- Voltage Rating:
- 3,300 to 15,000 V
- Cable Type:
- Wire and Unshielded
- Conductor Size:
- .05-.07
- Number Of Terminals:
- 3
- Type Of Terminations:
- Cold Shrink
- Voltage Rating:
- 3,300 to 15,000 V
3M™ Cold Shrink QT III 7600 S 3RJS Series Termination Kit includes a skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conjun...
$1,264.06 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$363.02 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ 5420 Series Molded Rubber QS II Splice Kit is a 3 piece inline splice designed to use on 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. A versatile design handles cables with a wide range of sizes and diameters. It is perfect for indoor and outdoor usage including direct burial, aerial and submersible applications.
3M™ 5420 Series Molded Rubber QS II Splice Kit is a 3 piece inline splice designed to use on 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. A versatile design handles cables with a wide range of sizes and diameters. It is perfect for indoor and outdoor usage including direct burial, aerial and submersible applications.
3M™ 5420 Series Molded Rubber QS II Splice Kit includes 2 molded conductive rubber end caps, 2 packe...150
3M™ 5420 Series Molded Rubber QS II Splice Kit includes 2 molded conductive rubber end caps, 2 packets of silicone grease, a vinyl tape roll and an instruction sheet. It is suitable to use on cables that can withstand a maximum temperature of 90 °C. The splice is molded from specially formulated, peroxide cured EPDM rubbers. The continuous current rating of each splice is the same as the current rating of the cable that it is sized to accommodate. The jacketing kit is needed for JCN cable. The kit meets the requirements of IEEE 404 standards for cable joints.
- 3-piece inline splice to use on jacketed concentric neutral (JCN) or concentric neutral (CN) cables
- Excellent electrical stress distribution
- Designed for direct burial, aerial and submersible applications
- Molded from specially formulated, peroxide-cured EPDM rubbers
- 3-piece inline splice to use on jacketed concentric neutral (JCN) or concentric neutral (CN) cables
- Excellent electrical stress distribution
- Designed for direct burial, aerial and submersible applications
- Molded from specially formulated, peroxide-cured EPDM rubbers
- UPC
- 054007158202
- UNSPSC
- 26121649
- Country of Origin
- USA
- Type:
- Inline
- Voltage Rating:
- 25,000/28,000 V
- Cable Type:
- Concentric Neutral (CN); Jacketed Concentric Neutral (JCN)
- Conductor Size:
- 2 AWG Solid
- Connector:
- CI-22A
- Insulation OD Range:
- 0.795 - 0.940 Inch
- Number of Conductors:
- 1
- Product Technology:
- Molded Rubber
- Type:
- Inline
- Voltage Rating:
- 25,000/28,000 V
3M™ 5420 Series Molded Rubber QS II Splice Kit is a 3 piece inline splice designed to use on 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. A versatile design handles ca...
$363.02 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders