.jpg)
.png)
Products
$38.85 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1/2x 6' NM POWER WHIP 12SOL 4WIRE
1/2x 6' NM POWER WHIP 12SOL 4WIRE
150
- UPC
- 751338850163
- UNSPSC
- 26121636
- Country of Origin
- MUL
- Color:
- black, green, red
- Type:
- Installation and Support Accessories
- Voltage Rating:
- 240 V
- Color:
- black, green, red
- Connector:
- 1/2" ST, 1/2 90 DEG
- Length:
- 6 in
- Type:
- Installation and Support Accessories
- Voltage Rating:
- 240 V
1/2x 6' NM POWER WHIP 12SOL 4WIRE
$38.85 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
0320W032R
- Manufacturer
- M And W Electric Manufacturing
$60.14 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1 1/4" 100 Amp Service Entrance Cable Kit
1 1/4" 100 Amp Service Entrance Cable Kit
- UPC
- 698397015327
- UNSPSC
- 26121662
- Country of Origin
- MUL
0320W032R
- Manufacturer
- M And W Electric Manufacturing
1 1/4" 100 Amp Service Entrance Cable Kit
$60.14 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
0420/WTC-23
- Manufacturer
- M And W Electric Manufacturing
$71.15 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1 1/2" 150 Amp Service Entrance Cable Kit
1 1/2" 150 Amp Service Entrance Cable Kit
- UPC
- 698397202901
- UNSPSC
- 26121662
- Country of Origin
- MUL
0420/WTC-23
- Manufacturer
- M And W Electric Manufacturing
1 1/2" 150 Amp Service Entrance Cable Kit
$71.15 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
$1.45 / FT
volume discounts
- $1.10 for 124+
6 USE RHH RHW STR CU BLK 500
6 USE RHH RHW STR CU BLK 500
150
- UPC
- 980100277000
- UNSPSC
- 26121615
- Country of Origin
- UKN
6 USE RHH RHW STR CU BLK 500
volume discounts
- $1.10 for 124+
$1.45 / FT
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
0620/WTC-34
- Manufacturer
- M And W Electric Manufacturing
$74.19 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
2" 200 Amp Service Entrance Cable Kit
2" 200 Amp Service Entrance Cable Kit
- UPC
- 698397202925
- UNSPSC
- 26121662
- Country of Origin
- MUL
0620/WTC-34
- Manufacturer
- M And W Electric Manufacturing
2" 200 Amp Service Entrance Cable Kit
$74.19 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$754.90 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers...150
The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability.The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one splice.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- UPC
- 051128534847
- UNSPSC
- 26121649
- Country of Origin
- USA
- Type:
- Inline
- Voltage Rating:
- 15,000 V
- Cable Type:
- Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield
- Conductor Material:
- Copper
- Conductor Size:
- 1 AWG
- Connector:
- 10004
- Insulation OD Range:
- 0.64 - 1.01 Inch
- Number of Conductors:
- 1
- Product Technology:
- Cold Shrink
- Type:
- Inline
- Voltage Rating:
- 15,000 V
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC)...
$754.90 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$754.90 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers...150
The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability.The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one splice.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- UPC
- 051128534816
- UNSPSC
- 26121649
- Country of Origin
- USA
- Type:
- Inline
- Voltage Rating:
- 15,000 V
- Cable Type:
- Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield
- Conductor Material:
- Aluminum; Copper
- Conductor Size:
- 2 AWG
- Connector:
- 20003
- Number of Conductors:
- 1
- Product Technology:
- Cold Shrink
- Type:
- Inline
- Voltage Rating:
- 15,000 V
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC)...
$754.90 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$754.90 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers...150
The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability.The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one splice.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- UPC
- 051128534823
- UNSPSC
- 26121649
- Country of Origin
- USA
- Type:
- Inline
- Voltage Rating:
- 15,000 V
- Cable Type:
- Longitudinally Corrugated (LC); Tape Shield; UniShield(R); Wire Shield
- Conductor Material:
- Copper
- Conductor Size:
- 2 AWG
- Connector:
- 10003
- Number of Conductors:
- 1
- Product Technology:
- Cold Shrink
- Type:
- Inline
- Voltage Rating:
- 15,000 V
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC)...
$754.90 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders